User's Manual

ManualsBrandsCIDMATE International Technology ManualsElectronics2.4 GHz Analog Cordless Phone

Safety Instructions ------------------------------------------------------------------------------------------- 3

Getting Started ------------------------------------------------------------------------------------------------ 5

Desk Mounting ------------------------------------------------------------------------------------------------ 8

Wall Mounting ------------------------------------------------------------------------------------------------- 9

Cordless Telephone Operation -------------------------------------------------------------------------- 11

Preparing for Use ---------------------------------------------------------------------------------------- 11

NO LINE Indicator --------------------------------------------------------------------------------------- 11

Receiving Calls ------------------------------------------------------------------------------------------ 11

Placing Calls --------------------------------------------------------------------------------------------- 12

Headset Feature ---------------------------------------------------------------------------------------- 13

Redial Feature ------------------------------------------------------------------------------------------- 13

Caller ID System Operation ------------------------------------------------------------------------------ 14

Caller ID System ---------------------------------------------------------------------------------------- 14

Viewing Caller Information During Incoming Calls ------------------------------------------ 14

MSG WAITING (Message Waiting) ------------------------------------------------------------ 14

Call Waiting ------------------------------------------------------------------------------------------ 15

Voice Mail Function -------------------------------------------------------------------------------- 15

C-F (Forwarded Call) ------------------------------------------------------------------------------ 15

L-D-C (Long Distance Call) ---------------------------------------------------------------------- 15

Caller List ------------------------------------------------------------------------------------------------- 15

Viewing the Caller List ----------------------------------------------------------------------------- 16

Placing a Call From the Caller List ------------------------------------------------------------- 16

Editing the Caller List before Dialing ----------------------------------------------------------- 16

Saving the Name and Number in the Caller List into the DIRECTORY --------------- 17

Deleting All Records in the Caller List --------------------------------------------------------- 17

Selective Deleting in the Caller List ------------------------------------------------------------ 17

Name and Telephone Number DIRECTORY ----------------------------------------------------- 17

Viewing the DIRECTORY ------------------------------------------------------------------------- 17

Speed Viewing the DIRECTORY --------------------------------------------------------------- 18

Saving in the DIRECTORY ----------------------------------------------------------------------- 18

PREFERRED CALLS ----------------------------------------------------------------------------- 18

BLOCKED CALLS ---------------------------------------------------------------------------------- 18

Editing a Name and Number in the DIRECTORY ------------------------------------------- 19

Contents

Summary of content (27 pages)

PAGE 1
Contents Safety Instructions ------------------------------------------------------------------------------------------- 3 Getting Started ------------------------------------------------------------------------------------------------ 5 Desk Mounting ------------------------------------------------------------------------------------------------ 8 Wall Mounting ------------------------------------------------------------------------------------------------- 9 Cordless Telephone Operation ------------------
PAGE 2
Contents Editing the Number in the DIRECTORY before Dialing ----------------------------------- 20 Placing Calls from the DIRECTORY ----------------------------------------------------------- 21 Deleting All Records in the DIRECTORY ----------------------------------------------------- 21 Selective Deleting in the DIRECTORY -------------------------------------------------------- 21 Function Operation ------------------------------------------------------------------------------------- 22 A.
PAGE 3
Safety Instructions IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock and/or injury, always follow these basic safety precautions when using your cordless telephone equipment. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the telephone. 3. Unplug this telephone from the wall outlet before cleaning or replacing the BATTERY PACK. Do not use liquid cleaners or aerosol cleaners on the telephone. Use a damp cloth for cleaning. 4.
PAGE 4
Safety Instructions 13. 14. 15. 16. 17. E. If the telephone has been dropped or the case has been damaged. F. If the telephone exhibits a distinct change in performance. Do not use the telephone to report a gas leak in the vicinity of the leak. Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
PAGE 5
Getting Started Connecting Your Phone This section is a reference guide to the basic functions and operations of your cordless telephone. For more detailed descriptions of the operations and features of this telephone, refer to the Contents on page 1. 1. Carefully remove your cordless telephone from its shipping carton. If there is any visible damage, do not attempt to operate this equipment. Return it to the place of purchase. 2.
PAGE 6
Getting Started BASE UNIT BASE UNIT ANTENNA TELEPHONE LINE CONNECTION JACK TONE/PULSE SELECTSWITCH TELEPHONE JACK POWER-IN CONNECTION JACK TELEPHONE LINE CORD 120V WALLOUTLET AC ADAPTER 7. Install the BATTERYPACK by plugging it into the BATTERY CONNECTOR inside the BATTERY COMPARTMENT. The HANDSET LCD Screen will display “RING: HI”. 8. Place the BATTERY PACK inside the BATTERY COMPARTMENT. 9. Slide the HANDSET BATTERY COMPARTMENTCOVER firmly into place in its closed position. 10.
PAGE 7
Getting Started ANTENNA Press the TALK button to confirm that you have a dial tone. If you do not get a dial tone, review steps 3 through 11. If you still do not have a dial tone, refer to the Problem Solving section on page 31. BELT CLIPHOOK HANDSET With the back of the HANDSET facing up, insert one side of the BELT CLIP HOOK into the matching slot at the top side of the HANDSET. Press down on the opposite side of the BELT CLIP until the other HOOK locks into the slot on the side of the HANDSET. 12.
PAGE 8
Desk Mounting Desk Mounting One of the special features of your telephone is the unique design of the MOUNTING BRACKET which can hold your phone at an angle when desk mounting or wall mounting. With the back of the BASE UNIT facing up, insert the hooks of the MOUNTING BRACKET (following the arrow direction for the DESK MOUNT) into the matching slots of the BASE UNIT (as shown in Figure 2). FIGURE 2 FIGURE 1 IMPORTANT: Attach the MOUNTING BRACKET when using your phone on a desk.
PAGE 9
Wall Mounting Wall Mounting You may choose to put the BASE UNIT of your cordless telephone on a wall. 1. With the back of the BASE UNIT facing up, insert the hooks of the MOUNTING BRACKET (following the arrow direction for the WALLMOUNT). 2. Connect the SHORT TELEPHONE LINE CORD to the TELEPHONE LINE CONNECTION JACK. 3. Insert the free end of the SHORT TELEPHONE LINE CORD through the hole of the MOUNTING BRACKET. 4.
PAGE 10
Wall Mounting 5. Align the upper keyhole on the MOUNTING BRACKETwith the upper stud of the wall plate, so that the opening end of the MOUNTING BRACKETmatches the lower stud, then pull the BASE UNIT down until it is securely seated. IMPORTANT: A “beep” will be heard when the HANDSET is properly positioned in the BASE UNIT CHARGE CRADLE and charging. Securely positioning the HANDSET in the BASE UNIT will also prevent the HANDSET from falling.
PAGE 11
Cordless Telephone Operation Preparing for Use Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require recharging of the BATTERY PACK more often. 1. Place the HANDSET on the BASE UNIT for 12 hours. 2. After 12 hours, remove the HANDSET from the BASE UNIT. Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require more frequent charging of the BATTERY PACK.
PAGE 12
Cordless Telephone Operation NOTE: 1. The Call Timer will start to count once you press the TALK button. 2. The LCD Screen emits light for 5 seconds every time you press any buttons on the HANDSET. 3. When “CALLS” appears on the LCD Screen, it means that the HANDSET is OFF-HOOK (connected to the telephone line). Minutes CALLS 00MIN Seconds 1SEC 14 Channel Placing Calls 1. Press the TALK button, the Call Timer starts to count.
PAGE 13
Cordless Telephone Operation Headset Feature Your telephone can utilize a headset (not included) to be connected to your HANDSET for you to enjoy hands-free communication. Pull out the HEADSET JACK COVER then insert the small plug at the end of the headset into the HEADSETJACK at the right side of the HANDSET. Follow the procedures discussed in “Receiving Calls” and “Placing Calls” to receive and place a call.
PAGE 14
Caller ID System Operation Caller ID System This telephone automatically displays an incoming caller’s name and telephone number together with the date and time of the call. It records up to 80 calls and stores the data in Memory. IMPORTANT: You must subscribe to the Caller ID service from your local telephone company to utilize this feature. Viewing Caller Information During Incoming Calls 1.
PAGE 15
Caller ID System Operation Call Waiting When you subscribe to a Call Waiting service from your local telephone company, this telephone will display the name and number of the second caller while you are having a conversation with your first caller. 1. When you are having a conversation, this telephone will automatically display the name and number of the second caller. The name will blink. e.g. JOHN BROWN 235-607-5512 10:00AM 2. Press the FLASH button to answer the second caller.
PAGE 16
Caller ID System Operation Viewing the Caller List 1. Press the SCROLL DOWN SCROLLUP button to view the latest Caller ID record, or press the button to view the first Caller ID record, press the SHIFTRIGHT button if the name has more than 11 characters. MICHAEL BROW 604-555-1212 10:00 AM 8/24 BROWING 604-555-1212 # NEW 1 10:00AM 8/24 # NEW 1 2. Press the DIR button to go back to STANDBYmode.
PAGE 17
Caller ID System Operation Saving the Name and Number in the Caller List into the DIRECTORY 1. Press the SCROLLUP or DOWN button to find the Caller ID record. RE/PA SAVE 2. Press and hold down the button. The LCD Screen will show “SAVED”. NOTE: It is not advisable to save a telephone number without the corresponding name. This will lead to improper display on PRIVATE and OUTOF AREAcalls. Deleting All Records in the Caller List 1.
PAGE 18
Caller ID System Operation Speed Viewing the DIRECTORY 1. Press the DIR button. 2. Enter the first letter of a name. (See Page 27 for detail of entering a letter.) 3. Press the SCROLLUP button to view all names with the same first letter. Saving in the DIRECTORY 1. Press the DIR button. 2. Press the EDIT button. 10 3. Use the TELEPHONE KEYPAD OPER 0 ~ WXY 9 buttons to enter the name, (see page 27 for detail) you can store up to 15 characters.
PAGE 19
Caller ID System Operation Editing a Name and Number in the DIRECTORY 1. Press the DIR button. 2. Press the SCROLLUP or DOWN button to find the record you want to edit. DIR MICHAEL BROW 604-555-1212 # 3. Press the character. EDIT 8 12 TOTAL button to edit the name, and the cursor will blink over the first DIR MICHAELBROW 604 555 1212 # 4. Press the SCROLLLEFT 8 cursor is blinking 12 TOTAL or RIGHT button to move the cursor to the letter or number you want to change.
PAGE 20
Caller ID System Operation Editing the Number in the DIRECTORY before Dialing 1. Press the DIR button. 2. Press the SCROLLUP or DOWN button to find the caller. 3. Press the EDIT button to edit the name. 4. Press the SCROLLDOWN button. e.g. DIR MICHAEL BROW 604 555 1212 # 5. Press the SCROLLLEFT you want to change. To erase, press the DELETE SCAN 1 or RIGHT 6. Press and hold down the DIAL 7 the DIAL 10 DIAL1+ 1+ 0 button to move the cursor to the number button.
PAGE 21
Caller ID System Operation Placing Calls from the DIRECTORY 1. Press the DIR button. 2. Press the SCROLL UP or DOWN 3. Press and hold down the DIAL 7 the DIAL 10 DIAL1+ 1+ 10 OPER 0 7 * button to find the record you want to call. button for a local call, or press and hold down button for a local call with area code, or press and hold down the # button for a long distance call. 4. To end the call, either press the TALK button or place the HANDSET on the BASE UNIT.
PAGE 22
Caller ID System Operation Function Operation You can change the settings on the HANDSET through the functions menu. This unit contains the following special functions: A. LANGUAGE F. PBX NUMBER B. SILENT ON/OFF G. FLASH TIME C. TIME SET H. PAUSE TIME D. RINGER VOLUME I. VOICE MAIL E. LCD CONTRAST J. MSG WAITING FUNC VOICE MAIL To access, press the KEYPAD 10 OPER 0 ~ WXY 9 button at STANDBY mode, then press the TELEPHONE button or the SCROLLUP ENGLISH or DOWN SILENT button.
PAGE 23
Caller ID System Operation A. Language This telephone offers English, Spanish, and French languages for your convenience. 1. Press the FUNC VOICE MAIL button. 2. Press the TELEPHONE KEYPAD 1 button. 3. Press the EDIT button. 4. Press the SCROLL UP or DOWN button to select the language you desire. You can also set the language by pressing the following TELEPHONE KEYPAD buttons; 1 for English, ABC for Spanish, or 2 DEF 3 for French. English is the preset language. 5. Press and hold down the 6.
PAGE 24
Caller ID System Operation 5. Press and hold down the 6. Press the FUNC VOICE MAIL RE/PA SAVE button. button to return to STANDBYmode. NOTE: The date and time will automatically set, if you have subscribed to the Caller ID service from your local telephone company. D. Ringer Volume This function enables you to adjust the ringer volume from HI, LOW, and OFF as desired. 1. Press the FUNC VOICE MAIL button. 2. Press the TELEPHONE KEYPAD GHI button. 4 3. Press the EDIT button. 4.
PAGE 25
Caller ID System Operation 4. Press the SCROLL UP or DOWN button. (OFF is the preset PBX number.) PBX MODE OFF - set for direct line access. 5. Press and hold down the 6. Press the FUNC VOICE MAIL RE/PA SAVE button. button to go back to STANDBY mode. 7 NOTE: When placing a call by using the DIAL 7 1+ * , or the DIAL 10 10 OPER 0 , or the DIAL1+ # button, this telephone will automatically add the PBX number and a pause time before the dialed telephone numbers. G.
PAGE 26
Caller ID System Operation I. Voice Mail This telephone enables you to store the Voice Mail Access Code number in your area. This will automatically connect you to the Voice Mail service provider with one-touch dialing. 1. Press the FUNC VOICE MAIL button. 2. Press the TELEPHONE KEYPAD WXY 9 button. 3. Press the EDIT button. 4. Enter the Voice Mail Post Code number by using the TELEPHONE KEYPAD WXY 9 10 OPER 0 ~ buttons. 5. Press and hold down the 6.
PAGE 27
Caller ID System Operation Telephone Keypad Characters 10 The TELEPHONE KEYPAD OPER 0 ~ WXY 9 buttons are used to enter characters when entering names. Press the appropriate TELEPHONE KEYPAD button to get the following characters. KEYPAD BUTTONS CHARACTERS 1 SPACE & ’( ) * . 1 2 ABC2 3 DEF3 4 GHI4 5 JKL5 6 MNO6 7 PQRS7 8 TUV8 9 WXYZ9 * * 0 0 # # EXAMPLE: If you want to enter the characters “ACE” on the HANDSET LCD Screen. 1. Press the DIR button. 2. Press the EDIT button. 3.