OWNER’S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS Model XG2150 2.4 GHz CORDLESS CALLER ID TELEPHONE WITH CALL WAITING 40 CHANNEL AUTOSCAN PLEASE READ THIS MANUAL CAREFULLY BEFORE USE. KEEP FOR YOUR REFERENCE. or installation information, please see “Getting Started” instructions on page 5 or your separate Quick Start Guide. Visit Us on the Web: www.uselectronics.
STOP Make certain you receive the best performance from your telephone. Read this manual first. Visit Us on the Web: www.uselectronics.
Special Features Congratulations on your selection of a quality XXXX product. With proper care, and by following the set-up and user instructions in this Owner’s Manual, this unit will provide you with years of trouble-free service. XXXX is committed to providing quality products that fit your needs. We would like to have any comments or suggestions you might have on this product. You may mail your comments to: U.S.
Special Features CALLER ID SYSTEM Multi-Function Large LCD Screen - Shows the number you are dialing, and with Caller ID service (available through subscription from your local telephone company), displays information about the caller before you answer the call. Name and Number DIRECTORY - Stores up to 40 names and numbers so that you can call them with a single key stroke. Caller List - Available with Caller ID service. Stores up to 80 calls to keep track of everyone who called.
HANDSET Controls 1. HANDSET ANTENNA 10. NEW CALL/MESSAGE WAITING INDICATOR Pg. 14 2. LCD SCREEN 3. REDIAL/PAUSE/SAVE BUTTON Pg. 13, 16~20, 23~26 11. DIR BUTTON Pg. 16~21, 27 4. SCROLL UP-DOWN/ SHIFT LEFT-RIGHT BUTTON Pg. 14, 16~27 12. FUNCTION/VOICE MAIL BUTTON Pg. 15, 22~26 13. HEADSET JACK Pg. 13 5. VOLUME CONTROL (HI, MID, LOW) SWITCH 14. DELETE/SCAN BUTTON Pg. 16, 17, 19~21, 27~28, 31, 38 6. TALK BUTTON Pg. 6, 7, 11~13, 15~16, 20, 21, 31 15. TELEPHONE KEYPAD Pg. 16, 18~20, 22~27 7.
HANDSET Controls 4. SCROLL UP-DOWN, SHIFT LEFT-RIGHT large LCD Screen. Button: Press to move around the 5. HANDSET VOLUME CONTROL (HI, MID, LOW) Switch: Select the receiver volume level (HI, MID, LOW). 6. TALK TALK Button: Press to answer an incoming call or to place a call. Press to end a call. 7. DIAL 10/0 Code. Button: (DIAL 10) Press and hold down to place a local call with Area 8. DIAL 7/TEMPORARYTONE Button: (DIAL7) Press and hold down to place a local call.
BASE UNIT Controls 1. TONE/PULSE SELECT SWITCH Pg. 6, 31 2. TELEPHONE LINE CONNECTION JACK Pg. 5, 9, 11, 31 3. POWER-IN CONNECTION JACK Pg. 5 4. BASE UNIT ANTENNA 5. CHARGE/IN USE LED INDICATOR Pg. 11~13 6. PAGE BUTTON 7.
BASE UNIT Controls 1. TONE/PULSE Select Switch 2. TELEPHONE LINE CONNECTION JACK 3. POWER-IN CONNECTION JACK 4. ANTENNA 5. IN USE/CHARGE LED Indicator: (IN USE) Lights up to indicate that the HANDSET is in TALK mode. (CHARGE) Lights up when the HANDSET is placed on the BASE UNIT for charging. 6. PAGE PAGE Button: Press to page the HANDSET. 7. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best performance, clean the CHARGE TERMINALS periodically with a damp cloth.