User's Manual

ManualsBrandsCIDMATE International Technology ManualsElectronics2.4 GHz Analog Cordless Phone

Caller ID System Operation

Viewing the Caller List

1. Press the SCROLL DOWN button to view the latest Caller ID record, or press the

SCROLL UP button to view the first Caller ID record, press the SHIFT RIGHT

button if the name has more than 11 characters.

2. Press the button to go back to STANDBY mode. (If no active buttons are pressed

for 20 seconds or you have viewed the last Caller ID record in the Caller’s List, the LCD

Screen will automatically return to STANDBY mode.)

Placing a Call from the Caller List

1. With the HANDSET in STANDBYmode, press the SCROLL DOWN button to

select from the latest Caller ID record, or press the SCROLL UP button to select

from the first Caller ID record.

2. Press and hold down the DIAL 7 button for a local call, or the DIAL 10

button for a local call with area code, or the DIAL1+ button for a long distance

call.

3. To end your conversation, either press the button or place the HANDSET on

the BASE UNIT.

To place a call from the Caller List in TALK mode, press the button, then follow

steps 1 through 3.

NOTE: You can edit the number before dialing, but you can not SAVE any changes in the

Caller List.

Editing the Caller List before Dialing

1. Press the SCROLL UP or DOWN button to find the Caller ID record.

2. Press the button.

3. Move the cursor by pressing the SHIFT LEFT or RIGHT or RIGHT button to

the digit you want to change. To erase digits, press the button. To add digits,

use theTELEPHONE KEYPAD ~ buttons.

4. Press and hold down the DIAL 7 button for a local call, or the DIAL 10

button for a local call with area code, or the DIAL 1 + button for a long distance

call.

WXY 9

DELETE

SCAN

EDIT

TALK

DIR

MICHAEL BROW

604-555-1212

10:00

8/24

NEW

BROWING

604-555-1212

10:00

8/24

NEW

Summary of content (23 pages)

PAGE 1
Caller ID System Operation Viewing the Caller List 1. Press the SCROLL DOWN SCROLL UP button to view the latest Caller ID record, or press the button to view the first Caller ID record, press the SHIFT RIGHT button if the name has more than 11 characters. BROWING 604-555-1212 MICHAEL BROW 604-555-1212 10:00 AM 8/24 NEW # 10:00AM 8/24 1 NEW # 1 2. Press the DIR button to go back to STANDBY mode.
PAGE 2
Caller ID System Operation 5. To end your conversation, either press the TALK button or place the HANDSET on the BASE UNIT. To save the edited record from the Caller List, follow steps 1 through 3 then press and hold down the RE/PA SAVE button. Saving the Name and Number in the Caller List into the DIRECTORY 1. Press the SCROLL UP 2. Press and hold down the or DOWN RE/PA SAVE button to find the Caller ID record. button. The LCD Screen will show “SAVED”.
PAGE 3
Caller ID System Operation 2. Press the SCROLL UP or DOWN view.Press the SHIFT RIGHT button to find the record you wish to button to view a name or telephone number of more than 11 characters. DIR DIR BROWING 604-555-1212 MICHAEL BROW 604-555-1212 # 8 TOTAL # 12 8 TOTAL 12 NOTE: To exit the DIRECTORY List at anytime, press the DIR button. Speed Viewing the DIRECTORY 1. Press the DIR button. 2. Enter the first letter of a name. (See Page 27 for detail of entering a letter.) 3.
PAGE 4
Caller ID System Operation PREFERRED CALLS You can assign stored numbers a PREFERRED CALLstatus which will generate a special ringer sound at the start of the second ring to any welcome caller in the DIRECTORY. When you are saving the name and number into the DIRECTORY, add a “#” symbol at the beginning of the name by pressing the 1+ # button. BLOCKED CALLS You can assign stored numbers a BLOCKED CALL status which will disable the ringer sound after the second ring to any caller in the DIRECTORY.
PAGE 5
Caller ID System Operation 7. Press and hold down the RE/PA SAVE button to confirm. IMPORTANT: It is not advisable to save a telephone number without the corresponding name in the DIRECTORY. This will lead to improper displays on PRIVATE and OUTOF AREAcalls. NOTE: When no active buttons are pressed for 20 seconds, the LCD Screen will automatically return to STANDBYmode. Editing the Number in the DIRECTORY before Dialing 1. Press the DIR button. 2. Press the SCROLL UP or DOWN button to find the caller.
PAGE 6
Caller ID System Operation Placing Calls from the DIRECTORY 1. Press the DIR button. 2. Press the SCROLL UP or DOWN 3. Press and hold down the DIAL 7 the DIAL 10 DIAL 1+ 1+ button to find the record you want to call. button for a local call, or press and hold down button for a local call with area code, or press and hold down the # button for a long distance call. 4. To end the call, either press the TALK button or place the HANDSET on the BASE UNIT. Deleting All Records in the DIRECTORY 1.
PAGE 7
Caller ID System Operation Function Operation You can change the settings on the HANDSET through the functions menu. This unit contains the following special functions: A. B. C. D. E. LANGUAGE SILENT ON/OFF TIME SET RINGER VOLUME LCD CONTRAST F. G. H. I. J. FUNC VOICE MAIL To access, press the KEYPAD ~ WXY PBX NUMBER FLASH TIME PAUSE TIME VOICE MAIL MSG WAITING button at STANDBY mode, then press the TELEPHONE 9 button or the SCROLL UP ENGLISH or DOWN SILENT button.
PAGE 8
Caller ID System Operation A. Language This telephone offers English, Spanish, and French languages for your convenience. 1. Press the FUNC VOICE MAIL button. 2. Press the TELEPHONE KEYPAD 1 button. 3. Press the EDIT button. 4. Press the SCROLL UP or DOWN button to select the language you desire. You can also set the language by pressing the following TELEPHONE KEYPAD 1 for English, buttons; ABC 2 for Spanish, DEF 3 or for French. English is the preset language. 5. Press and hold down the 6.
PAGE 9
Caller ID System Operation 5. Press and hold down the 6. Press the FUNC VOICE MAIL RE/PA SAVE button. button to return to STANDBY mode. NOTE: The date and time will automatically set, if you have subscribed to the Caller ID service from your local telephone company. D. Ringer Volume This function enables you to adjust the ringer volume from HI, LOW, and OFF as desired. 1. Press the FUNC VOICE MAIL button. 2. Press the TELEPHONE KEYPAD GHI 4 button. 3. Press the EDIT button. 4.
PAGE 10
Caller ID System Operation 4. Press the SCROLL UP or DOWN button. (OFF is the preset PBX number.) PBX MODE OFF - set for direct line access. 5. Press and hold down the 6. Press the FUNC VOICE MAIL RE/PA SAVE button. button to go back to STANDBY mode. NOTE: When placing a call by using the DIAL 7 DIAL1+ 1+ , or the DIAL 10 , or the # button, this telephone will automatically add the PBX number and a pause time before the dialed telephone numbers. G.
PAGE 11
Caller ID System Operation I. Voice Mail This telephone enables you to store the Voice Mail Access Code number in your area. This will automatically connect you to the Voice Mail service provider with one-touch dialing. 1. Press the FUNC VOICE MAIL button. 2. Press the TELEPHONE KEYPAD WXY 9 button. 3. Press the EDIT button. 4. Enter the Voice Mail Post Code number by using the TELEPHONE KEYPAD WXY ~ 9 buttons. 5. Press and hold down the 6. Press the FUNC VOICE MAIL RE/PA SAVE button.
PAGE 12
Caller ID System Operation Telephone Keypad Characters The TELEPHONE KEYPAD ~ WXY 9 buttons are used to enter characters when entering names. Press the appropriate TELEPHONE KEYPAD button to get the following characters. KEYPAD BUTTONS CHARACTERS 1 SPACE & 2 ABC2 3 DEF3 4 GHI4 5 JKL5 6 MNO6 7 PQRS7 8 TUV8 9 WXYZ9 * * 0 0 # # ()*.1 EXAMPLE: If you want to enter the characters “ACE” on the HANDSET LCD Screen. 1. Press the DIR button. 2. Press the EDIT button. 3.
PAGE 13
Security Security System Your cordless telephone uses a digital coding security system to prevent unauthorized use of your telephone line by another nearby cordless telephone. The system has its own identifying signal created by microcomputers in both the BASE UNIT and the HANDSET. Security Code This telephone has an internal security code with 65,536 possible combinations.
PAGE 14
Recharging the BATTERY PACK Battery Type Use the following type and size of BATTERY PACK: Cordless Telephone BATTERY PACK 3.6V, 600mAh U.S. Electronics Inc. Ni-Cd Battery Pack: Model B650 This BATTERY PACK is available through: U.S. Electronics Service Center 105 Madison Avenue New York, NY 10016 1-866-466-9228 NOTES: Ni-Cd 1. During a power interruption, the BASE UNIT does not operate, and a phone conversation cannot be made on the HANDSET. 2.
PAGE 15
Changing the BATTERY PACK Changing the Battery Pack The BATTERY PACK provides power for the HANDSET of your cordless telephone. To Replace BATTERY PACK: 1. Remove the HANDSET BATTERY COMPARTMENTCOVER by sliding it down. 2. Pull out the BATTERY PACK PLUG and remove the BATTERYPACK. 3. Plug the new BATTERY PACK into the BATTERY CONNECTOR. 4. Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its closed position. 5. Before use, charge the new BATTERY PACK for 12 hours.
PAGE 16
Problem Solving Problem Solving Section For your assistance, we have listed below a few common problems. Phone does not work, check the following: 1. 2. 3. 4. BASE UNIT is plugged into a power source. HANDSET is charged. TONE/PULSE Select switch is in the right position. TELEPHONE LINE CORD is plugged into the TELEPHONE JACK. Range of phone limited, check the following: 1. BASE UNIT is centrally located in your residence. 2. BASE UNIT is not located near appliances. No dial tone, check the following: 1.
PAGE 17
Technical Information Technical Information This cordless telephone uses radio frequencies to allow mobility. There are certain difficulties in using radio frequencies with a cordless telephone. While these are normal, the following could affect the operation of your system. Noise Electrical pulse noise is present in most homes at one time or another. This noise is most intense during electrical storms.
PAGE 18
FCC Requirements Federal Communications Commission Requirements This equipment complies with Part 68 of the FCC rules. A label on the BASE UNIT of the equipment contains, among other information, the ACTA Product Number and the Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your telephone company.
PAGE 19
FCC Requirements Federal Communications Commission Requirements (continued) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 20
Warranty Warranty Information XXXX Products One-Year Limited Warranty This limited warranty sets forth all XXXX Products responsibilities regarding your telephone. There are no other expressed or implied warranties from XXXX Products. Warranty Service Provided If you purchased the telephone new from a retail vendor, XXXX Products warrants the telephone against defects in material and workmanship for a period of one (1) year from the original date of purchase.
PAGE 21
Warranty What To Do for Warranty Service During the first thirty (30) days, a defective product is eligible for over-the-counter exchange at the retailer from whom it was purchased. After thirty (30) days, the defective product should be returned to the authorized service center. Please allow 2-3 weeks for the return of your telephone product. The shipping address of the authorized service center is: U.S.
PAGE 22
Wall Mounting Template This page serves as a template for attachment of screws to the wall when mounting this telephone on the wall. 1. Cut out this page. 2. Use this template to determine the distance between screws when mounting this phone on the wall. The two cross hairs identify where to attach the screws.
PAGE 23
IMPORTANT In order to get maximum life from the HANDSET BATTERY PACK, be sure to charge the HANDSET for 12 hours before initial use. IMPORTANT Placing your BASE UNIT near appliances such as televisions, refrigerators, radios, or microwave ovens may cause interference. IMPORTANT When you hear interference, press the DELETE button to change the operating SCAN channel. IMPORTANT The AC ADAPTER must always be plugged into an electrical outlet.