900 MHz CORDLESS CALLER ID TELEPHONE WITH CALL WAITING 40 CHANNEL AUTOSCAN Model MH9111 OWNER’S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS PLEASE READ THIS MANUAL CAREFULLY BEFORE USE. KEEP FOR YOUR REFERENCE. For installation information, please see “Getting Started” instructions on page 5 or your separate Quick Start Guide. Visit Us on the Web: www.uselectronics.
STOP Make certain you receive the best performance from your telephone. Read this manual first. Visit Us on the Web: www.uselectronics.
Special Features Congratulations on your selection of a quality BellSouth product. With proper care, and by following the set-up and user instructions in this Owner ’s Manual, this unit will provide you with years of trouble-free service. BellSouth is committed to providing quality products that fit your needs. We would like to have any comments or suggestions you might have on this product. You may mail your comments to: U.S.
Special Features CALLER ID SYSTEM Multi-Function Large LCD Screen - Shows the number you are dialing, and with Caller ID service (available through subscription from your local telephone company), displays information about the caller before you answer the call. Name and Number DIRECTORY - Stores up to 40 names and numbers so that you can call them with a single key stroke. Caller List - Available with Caller ID service. Stores up to 80 calls to keep track of everyone who called.
HANDSET Controls 1. HANDSET ANTENNA 2. NEW CALL/MESSAGE WAITING INDICATOR Pg. 14 3. LCD SCREEN 4. TALK BUTTON Pg. 6, 7, 11~13, 15~16, 20, 21, 31 5. SCROLLUP-DOWN/ SHIFTLEFT-RIGHT BUTTON Pg. 14, 16~27 11. DIR BUTTON Pg. 16~21, 27 12. FUNCTION/VOICE MAIL BUTTON Pg. 15, 22~26 6. VOLUME CONTROL (HI, MID, LOW) SWITCH 7. DIAL10 BUTTON Pg. 12, 16, 20~21, 25 8. DIAL7/TEMPORARY TONE(*) BUTTON Pg. 12, 16, 18, 20~21, 25 9. REDIAL/PAUSE/SAVE BUTTON Pg. 13, 16~20, 23~26 10. EDITBUTTON Pg. 16, 18~20, 23~27 13.
HANDSET Controls 5. SCROLLUP-DOWN, SHIFT LEFT-RIGHT Button: Press to move around the large LCD Screen. 6. HANDSET VOLUME CONTROL(HI, MID, LOW) Switch: Select the receiver volume level (HI, MID, LOW). 7. DIAL 10/0 Code. 10 OPER 0 Button: (DIAL 10) Press and hold down to place a local call with Area 8. DIAL7/TEMPORARY TONE 7 Button: (DIAL7) Press and hold down to place a local call. (*) Press to temporarily change the Dialing mode from Pulse to Tone for Rotary Service Users.
BASE UNIT Controls 1. TONE/PULSE SELECT SWITCH Pg. 6, 31 2. POWER-IN CONNECTION JACK Pg. 5 3. TELEPHONE LINE CONNECTION JACK Pg. 5, 9, 11, 31 4. BASE UNIT ANTENNA 5. HANDSET RETAINER TAB Pg. 10 6. CHARGE TERMINALS 7. PAGE BUTTON 8. CHARGE/IN USE LED INDICATOR Pg.
BASE UNIT Controls 1. 2. 3. 4. 5. TONE/PULSE Select Switch POWER-IN CONNECTION JACK TELEPHONE LINE CONNECTION JACK ANTENNA:Raise or reposition for the best reception. HANDSET RETAINER TAB: Secures the HANDSET in the CHARGE CRADLE when wall mounting. 6. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best performance, clean the CHARGE TERMINALS periodically with a damp cloth. 7. PAGE PAGE Button: Press to page the HANDSET. 8.