CID MATE CORDLESS TELEPHONE S00 MHz FILTERED SOUND™ WITH 40 CHANNEL AUTO SCAN OWNERS MANUAL INSTALLATION Model 5012 AND OPERATING INSTRUCTIONS PLEASE READ THIS MANUAL CAREFULLY BEFORE UBE, KEEP FOR YOUR REFERENCE vt SOU For installation information, please see “Getting Started” instructions on page 8 or your separate Quick Start Guide.
LILLE EE TTT Congratulations on your selection of a quality Automate product With proper care and adherence Io the set-up and user instructions in his manual, this unit will provide you with years of trouble-free service. Bell South is committed fo providing quality products that ft your needs. We would like to have any comments or suggestions you might have an this product, You may mail your comments ko U.S.
HANDSET ANTENNA Pgs VOLUME CONTROL Hi, MID, LOWS SWITCH Pgs SCAN BUTTON Pu5, 18,21 FLASH BUTTON REDIAL BUTTON Pg5 Pgs, 15 HEADSET JACK IN BATHHOUSE LOW. Pgs, 15 INDICATOR Pgs, 14, 15,16 TALK BUTTON Pg6,9, TONE BUTTON EHO BUTTON Pgs Pg5, 16, 17 PAUSE BUTTON Fy, 16 RI CHARGE CONTACTS Pas For installation information, please see “Getting Started” instructions on page 8 or your separate Quick Start Guide.
TELEPHONE LINE CONNECTION JACK PG7.9 FOLLOWER CONNECTION JACK Payee TONE PULSE SELECT SWITCH Pav.
Safety Instructions HANDSET Controls Location and Function BASE UNIT Controls Location and Function —e Getting Started 8 Desk Mounting Wall Mounting Basic Operation Receiving Calls — Placing Cali Using the Headset Feature — Storing Numbers Recalling Stored Numbers -— Security System Recharging the Battery Pack w— Changing the Battery Pack «wm Problem Solving Technical Information FCC Requirements ~Warranty Wall Mount Template
LEI ei IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock landlord injury, always follow these basic safety precautions when using your cordless telephone equipment. Read and understand all instructions. Flow alt warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners oF aerosol cleaners, Use a damp cloth for cleaning. .
I EET the product has been dropped or the case has been damaged. F. if the product exhibits a distinct change in performance. 13. Do not use the telephone to report a gas leak in the vicinity of the leak. 14. Never install telephone wiring during a lightning storm. 45. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 16. Never touch insulated telephone wires or terminals unless the telephone tine has been disconnected at the network interface. 17.
VEL ET . Scan Button: Press to charge the operating channel when you hear interference. Redial Button: Press 10 redial the last number you dialed. In bathhouse low Indicator: Lights up when tha HANDSET is in TALK mode. Blinks when battery power is low. {See page 16 for detail} . Taine Button: Press fo temporarily change ths dialing mode from Pulse to Tone for Rotary Service Users. (Press once before entering numbers to access the answering system or electronic backing services, etc.) .
LZR ART . Telephone Line Connection Jack . Power.in Connection Jack . Tone/Pulse Select Switch . Antenna: Raise or reposition for the test reception. . In supercharge Indicator Lights up {0 indicate the unit is ON or when the HANDSET is placed on the BASE UNIT for charging. it flashes fo indicate the page function is in use. . PAGE Button: Press to page the HANDSET. . Charge Terminals: For charging the HANDSET battery pack. For best performance, clean periodically with a damp cloth only.
[25 en ET Connecting Year Phone: This section is a reference guide fo the basic functions snd operations of your cordless telephone, For more retaliated descriptions of Ihe operations and features of (his telephone, Deter io the Contents on page 1. 1. Carefully remove your cordless telephone from its shipping carton, If there fs any visible damage, da not attempt to operate tis equipment. Reno it 10 the pace of purchase. 2. Check to be sure you nave off rems they cons with this cordless oenophile system.
BASE UNIT DARTER CONCRETION ADK 8 install the BATTERY PACK by pegging # ino the BATTERY CONNECTOR inside the BATTERY COMPARTMENT. 9. Place the BATTERY PACK inside the BATTERY DEPARTMENT. 10. Slide the HANDSET BATTERY COMPARTMENT COVER firmly ink claps i 5 closed potion 1%. TONE PULSE Select Sitarist A. 1 your home Is dipped with a tune dialing system, sel the TONE PULSE Select Switch © the TUNE position. BH you have & rotary dusting system, sel the TONELESS Select Swish to PULSE potion, £.
Frees the (BiY button to confirm that as hae » dist tone, If your de nol gat a dial tore, review step 3 through YL If wi SEY do not have @ dint tone, refer lo the Blammo forgiving vivisection peg 21 BELT CLIP HOOK With the back of the HANDSET facing up, inset one side of the BELT CLIP HOOK into the matching slot at the top side of the HANDSET, Crass doe on the opposite side of the BELT CLIP until ihe wither hook socks undo the sig on the side of he HANDSET. 132.
[1 CoA Desk Mounting: Cre of the spacial features of your telephone is the unique design of the MOUNTING BRACKET which con hold your phone at an Angie of 30° when desk mounting. There are wo positions to choose from 1. NORMAL POSITION (Mounting Brace! ool required) For normal position, as shown in Figure 1, place the BASE UNIT on any desired but suitable Vacation. FIGURE 1 2.
VE Wall Mounting: You may enamor to put the BASE UNIT of your cordless telephone on 8 wall, 1. Wh the back of the BASE UNIT facing up, conned! the SHORT TELEPHONE LINE COR 1 the TELEPHONE LINE CONNECTION JACK, 2. Insert tho SHORT TELEPHONE LINE CORD trough the tole of the MO LINTING BRACKET. 3.
ge IEEE Preparing for Hse Before you can usa your cordless megaphone, you taus charge the HANDSET for 12 hours, Failures to do so wilt require recharging of the BATTERY PACK mare often. 1. Place tha HANDSET on the BASE UNIT for 12 hours, 2. After 12 hours, remove the HANDSET fom tho BASE UNIT, 3, Raises or reposition the BASE UNIT antenna for best reception, Before you con use your cordless telephones, you must engorge the HANDSET for 12 hours.
Engraving Cal with the HANDSET on the BASE GRIT 1. When the phone rings, Bt the HANDSET. The iN USE Indicator will tight up, (NOTE; The HANDSET RINGER SWITCH must be in the HN position for Anger in operate.) 2. Start your conversation, 3. To and your conversation, either press the butler or place the HANDSET on the BABE UNIT. If you place ha HANDSET on fhe BASE UNIT charge cradle, you activate the automatic STANDBY fasteners. Revolving Cols with the HANDSET off the BASE UNIT 1.
fT Ew Placing Calls tT. Press the RIK bunion. the IN USE indicator wil it up. Liston for 5 dial tone. Dist the phone number. 4. When you have finished with your call, press the (BEY button again, The USE indicator will um off, HARRIET Radiate Feature 1. I you get x busy tone, press the (HED button 10 hang up. 2. Later, press the (EHD button again. Bo Listen for a al tone.
Ri Storing Numbers 1. Be sure the BASE UNIT IN USE indicator is off and the HANDSET is In STANDBY mode. Press the HERD bunion. {ial the purr bier you want to store, Press the GED mutton again, Dino the dex number (O~6) where you want to store that number, You will hem one confirm beep. 8, Write the name of the person you will de loafing with that number next to the corresponding index number on the kilotons number ord, 7. Repeat steps 1 trough § for other elephantine numerators.
Recalling Stared Numbers Recalling Stored Numbers from Emery 3. Press te (HC bun. 2. Press the (FRB) bunion. 3. Press the Index number for the number you have stored. The stored number wilt ba dialed automatically. EXAMPLE: To recall number 115-1988 sired under key 1 on the keypad, « Press the (HS button. Dir he (Heine Patton, Dial 1. Sue To obtain the best reception, be sure to raise or reposition the BASE UNIT antenna.
NE Security System Your cordless telephones uses a digital cording securely system to proven unauthorized use of your telephone bre by another nearly by cordless TELNETTed. The system 155 ia own identifying signal created by microcomputers in both the BASE UNIT and HANDSET. Security Code This telephone hae an internal security code with 85.
Recharging the Battery Pack Battery Type Use the following type and size of battery pack: Cordless Telephones Battery Pack : 2.69, 600mAk N Unison Products Carp. Ty 5) Ni-C Battery Pack: model B50 <; Neil This bat tray pack is available trough: U.8.
Changing the Battery Pack Changing the BATTERY PACK The BATTERY PACK provides power for the HANDSET of your cordless elephant. TQ REPLACE BATTERY PACK: Own 5. Remove the HANDSET BATTERY COMPARTMENT COVER by siding R down. Pull put the BATTERY PACK PLUG and remove the BATTERY OVER. Lug fhe new BATTERY PACK nly the BATTERY CONNECTOR. Slide the HANDSET BATTERY COMPARTMENT COVER filmy inch place in its closed position. Before use, chisel the rew BATTERY PACK for 12 hours.
Fd TLR TT Problem Stetting Section For your assistance, we have sifted below 3 few common problems. Hung dense nat work, check the following: t. BASE UNIT is plugged into power sore, 2. HANDSET is charged. . 3. TONE/PULSE switch is in the right position. 4. TELEPHONE LINE CORD is plugged into the telephones jack. Range of phone Emitted, check the following: 1 ANTENNA on BASE UNIT is cased. 2. BABE UNIT is centrally located in your residence. 3. BABE UNIT Is not located near appliances.
HE Er Technical information This cordless telephones uses radio frequencies lo allow mob lily. There are co rain difficulties in sing radii frequencies with a cordless telephone. While these are manana, the following could affect the operation of your system. Noise Electrical pulse nose: is present ln most homes at one time or bother. This noise is most intense during lacteal storms. Tartan kinds of electrical equipment Sushi 88 light diagrams, artfulness bulbs, mots, and fans also generate noise pulses.
Federal Communicative Commission Requirements This equipment complies with Part 88 of the FOU rules.
[oo LTT ET Federal Communications Commission Requirements {scantiness) Note: This equipment has been tested and found to comply with the digital device, pursuant to Part 15 of the FCC Rules. These limits are designed © provide reasonable protection against harmful interference in a resident ingratiation, This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the Instructions, may case harmful interference 10 radio communications.
Elisabeth Products One-Year Limited Warranty This limited warranty less forth al) chinaware Products responsibilities regarding your antiphons, Thames are no other expressed of impeded awareness firm TIDEWATER Products, Warranty Service Provided § yous purchased the telephone new farm 3 retell vendor, CID MATE Products warrants ihe equipment aghast defects i material and workmanship for 2 pried of tne (1) year from the original date of purchase, This warranty bin few of off other express warranties.
ETE) What Te De for Warranty Service During he Erst thirty (30) days, a detective graduate is eligible for over the counsel exchange at the retailer farm whom i was purchased. Allen Idly (30) days, the defective product should be returned (© the authorized service center. Pisses flow 2-3 weeks for he rem of your telephone. The shipping sadness of the Buiionzad service canter is Tunisian CONSUMER CENTER CIO Southey Bonded Warehouse 1451 ML Zion Fd.
Template for Wall Mounting This page servos 8a a template for attachment of screws the wall wham mounting this telephone on the well, 1. Cut out this page. Z. Use his template to determine the distance between screws when mounting this phone on the wall Fhe tw cross hairs identify wharf to attach the sowers.
[Lge in hy in order to gat maximum life from the HANDSET battery pack, be sure fo charge the HANDSET for 12 hours before initial use. [ge tart Placing your BASE UNIT near appliances such as televisions, refrigerators, radios, or microwave ovens may cause interference. Lrg When you hear interference, press the £on button to change the operating Ea [Tiger The AC ADAPTER must always be plugged into an [EE LET IMPORTANT To obtain the best reception, be sure to raise or reposition the BASE UNIT ANTENNA.