Safety Instructions Part 4

ManualsBrandsCIDMATE International Technology ManualsElectronics2.4GHz DSST Multi-Handset w/ CID+DAM

23. MAILBOX 2 Button: Press to activate functions for MAILBOX 2.

24. MINUTE Button: Press to set the minute during time setting, or press to set the

third digit of the access code during code setting.

25. MEMO Button: Press and hold down to record memo messages.

26. VOL + Button: Press to increase the speaker volume.

27. LED MESSAGE DISPLAY: indicates the number of memos/messages received, status of

the system.

Ea - Erase OP - OGM is playing 01 ~ 63 - No. of memos/messages

AO - Announce Only FU - Memory is full PA - Pause

28. SPEAKER Button: Press to answer the incoming call using the BASE UNIT.

29. MAILBOX 3 Button: Press to activate functions for MAILBOX 3.

30. IN USE LED Indicator: Lights up to indicate that the HANDSET is in TALK mode.

31. STOP Button: Press to stop playing a message. Press and hold down for more

than 3 seconds to initiate/re-initiate your answering machine, then release the button and

a “beep” will sound.(See detail operations in pages 34 and 47.)

32. CHARGE LED Indicator: Lights up when the HANDSET is placed on the BASE UNIT for

charging.

33. PLAY Button: Press to play messages.

34. MICROPHONE

play

stop

speaker

vol +

memo

min

BASE UNIT Controls

24.MINUTE BUTTON

Pg. 34, 41

23.MAILBOX 2 BUTTON

Pg. 36, 38~40

29.MAILBOX 3 BUTTON Pg. 36,

38~40

27.LED MESSAGE DISPLAY

Pg. 13, 36~37, 39~40

33.PLAY BUTTON Pg. 38~39

30.IN USE LED INDICATOR

31.STOPBUTTON Pg. 8, 34, 36, 39, 47

32.CHARGE LED INDICATOR

28.SPEAKER BUTTON Pg. 13

26.VOL+ BUTTON

Pg. 13, 36, 47

25.MEMO BUTTON Pg. 38, 40

34.MICROPHONE Pg. 35, 38

Summary of content (11 pages)

PAGE 1
BASE UNIT Controls 29.MAILBOX 3 BUTTON Pg. 36, 38~40 30.IN USE LED INDICATOR 23.MAILBOX 2 BUTTON Pg. 36, 38~40 24.MINUTE BUTTON Pg. 34, 41 25.MEMO BUTTON Pg. 38, 40 31.STOPBUTTON Pg. 8, 34, 36, 39, 47 26.VOL+ BUTTON Pg. 13, 36, 47 27.LED MESSAGE DISPLAY Pg. 13, 36~37, 39~40 32.CHARGE LED INDICATOR 33.PLAY BUTTON Pg. 38~39 28.SPEAKER BUTTON Pg. 13 34.MICROPHONE Pg. 35, 38 23. MAILBOX 2 2 Button: Press to activate functions for MAILBOX 2. 24.
PAGE 2
Contents Safety Instructions ------------------------------------------------------------------------------------------- 4 Getting Started ------------------------------------------------------------------------------------------------ 6 Desk Mounting ------------------------------------------------------------------------------------------------ 9 Wall Mounting ----------------------------------------------------------------------------------------------- 10 Cordless Telephone Operation -------------------
PAGE 3
Contents PREFERRED CALLS ----------------------------------------------------------------------------- 21 BLOCKED CALLS ---------------------------------------------------------------------------------- 21 Editing a Name and Number in the DIRECTORY ------------------------------------------- 21 Editing the Number in the DIRECTORY before Dialing ----------------------------------- 22 Placing Calls from the DIRECTORY ----------------------------------------------------------- 23 Deleting All Records in the DI
PAGE 4
Setting to Answer Calls ----------------------------------------------------------------------------------- 37 Setting to Announce Only -------------------------------------------------------------------------------- 37 Screening Incoming Calls -------------------------------------------------------------------------------- 37 Message Alert ----------------------------------------------------------------------------------------------- 37 Setting Ring Select --------------------------------------------------
PAGE 5
Safety Instructions IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock and/or injury, always follow these basic safety precautions when using your cordless telephone equipment. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the telephone. 3. Unplug this telephone from the wall outlet before cleaning or replacing the BATTERY PACK. Do not use liquid cleaners or aerosol cleaners on the telephone. Use a damp cloth for cleaning. 4.
PAGE 6
Safety Instructions 13. 14. 15. 16. 17. E. If the telephone has been dropped or the case has been damaged. F. If the telephone exhibits a distinct change in performance. Do not use the telephone to report a gas leak in the vicinity of the leak. Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
PAGE 7
Getting Started Connecting Your Phone This section is a reference guide to the basic functions and operations of your cordless telephone. For more detailed descriptions of the operations and features of this telephone, refer to the Contents on page 1. 1. Carefully remove your cordless telephone from its shipping carton. If there is any visible damage, do not attempt to operate this equipment. Return it to the place of purchase. 2.
PAGE 8
Getting Started 7. Install the BATTERYPACK by plugging it into the BATTERY CONNECTOR inside the BATTERY COMPARTMENT. The HANDSET LCD Screen will display “WAIT REG.” Follow the Handset Registration in page 29 to register your HANDSET. 8. Place the BATTERY PACK inside the BATTERY COMPARTMENT. 9. Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its closed position. 10. IMPORTANT: Before initial use, charge the HANDSET for 12 hours. 11. TONE/PULSE Select Switch: A.
PAGE 9
Getting Started ANTENNA Press the talk button to confirm that you have a dial tone. If you do not get a dial tone, review steps 3 through 11. If you still do not have a dial tone, refer to the Problem Solving section on page 46. BELT CLIP HOOK HANDSET With the back of the HANDSET facing up, insert one side of the BELT CLIP HOOK into the matching slot at the top side of the HANDSET. Press down on the opposite side of the BELT CLIP until the other HOOK locks into the slot on the side of the HANDSET. 12.
PAGE 10
Desk Mounting Desk Mounting One of the special features of your telephone is the unique design of the MOUNTING BRACKET which can hold your phone at an angle when desk mounting or wall mounting. With the back of the BASE UNIT facing up, rotate the MOUNTING BRACKET to the position as in Figure 1 (follow the arrow direction for the DESK MOUNT). Place your telephone on any flat surface of desk as in Figure 2 FIGURE 1 FIGURE 2 IMPORTANT: Attach the MOUNTING BRACKET when using your phone on a desk.
PAGE 11
Wall Mounting Wall Mounting You may choose to put the BASE UNIT of your cordless telephone on a wall. 1. With the back of the BASE UNIT facing up, rotate the MOUNTING BRACKETto the position shown in Figure 1 (follow the arrow direction for the WALL MOUNT). 2. Insert the small plug on the end of the AC ADAPTER into the POWER-IN CONNECTION JACK at the back of the BASE UNIT. 3. Plug the AC ADAPTER into a 120V wall outlet. 4. Connect the SHORT TELEPHONE LINE CORD to the TELEPHONE LINE CONNECTION JACK.