2.4 GHz DIGITAL SPREAD SPECTRUM ALL DIGITAL ANSWERING SYSTEM WITH CALLER ID / CALL WAITING & SPEAKERPHONE IN BASE UNIT 54 CHANNEL AUTOSCAN WITH 4 SEPARATE MAILBOXES MULTIPLE HANDSETS FEATURE Model GH9764 OWNER’S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS PLEASE READ THIS MANUAL CAREFULLY BEFORE USE. KEEP FOR YOUR REFERENCE. For installation information, please see “Getting Started” instructions on page 6 or your separate Quick Start Guide. Visit Us on the Web: www.uselectronics.
Wall Mounting IMPORTANT: The BASE UNIT IN USE LED indicator will light up RED when the HANDSET is properly positioned in the BASE UNIT CHARGE CRADLE and charging. Securely positioning the HANDSET in the BASE UNIT will also prevent the HANDSET from falling.
Cordless Telephone Operation Preparing for Use Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require more frequent recharging of the BATTERY PACK, See page 44 for more information on the BATTERY PACK. 1. Place the HANDSET on the BASE UNIT for 12 hours. 2. After 12 hours, remove the HANDSET from the BASE UNIT. The “RING: HI” should be displayed on the LCD Screen. If you see “WAIT REG.
Cordless Telephone Operation NOTE: 1. The Call Timer will start to count once you press the talk button. 2. The LCD Screen emits light for 5 seconds every time you press any buttons on the HANDSET. 3. When “CALLS” appears on the LCD Screen, it means that the HANDSET is OFF-HOOK (connected to the telephone line). Minutes CALLS 00MIN Seconds 1SEC 14 Channel Receiving Calls Using the BASE UNIT SPEAKERPHONE 1. When the phone rings, press the SPEAKER button and begin speaking. 2.
Cordless Telephone Operation Placing Calls 1. Press the talk button, the Call Timer starts to count. The HANDSET LCD Screen will display “CALLS”, and “TALKING”, and the BASE UNIT IN USE LED indicator will light up GREEN. 2. Listen for a dial tone. CALLS TALKING. . . . 3. Dial the phone number. 4. When you have finished with your call, press the talk button again or place the HANDSET on the BASE UNIT. OR 1. Dial the phone number. 2.
Caller ID System Operation Redial Feature 1. If you get a busy tone, press the talk button or place the HANDSET on the BASE UNIT to hang up. 2. Later, press the talk button again. 3. Listen for a dial tone. redial 4. Press the save/pause button. This will automatically redial the last telephone number you called in TALK mode. 5. When you have finished with your call, press the talk button again (the BASE UNIT IN USE LED indicator will turn off) or place the HANDSET on the BASE UNIT.
Caller ID System Operation Caller ID System This telephone automatically displays an incoming caller’s name and telephone number together with the date and time of the call. It records up to 80 calls and stores the data in Memory. IMPORTANT: You must subscribe to the Caller ID service from your local telephone company to utilize this feature. Viewing Caller Information During Incoming Calls 1.
Caller ID System Operation Call Waiting When you subscribe to a Call Waiting service from your local telephone company, this telephone will display the name and number of the second caller while you are having a conversation with your first caller. e.g. 1. When you are having a conversation, this JOHN BROWN telephone will automatically display the name and 235-607-5512 number of the second caller. The name will blink. 10:00 8/24 13 AM edit flash edit 3.
Caller ID System Operation Viewing the Caller List 1. Press the SCROLL DOWN SCROLLUP button to view the latest Caller ID record, or press the button to view the first Caller ID record, press the SHIFTRIGHT button if the name has more than 11 characters. MICHAEL BROW 604-555-1212 10:00AM 8/24 BROWING 604-555-1212 # NEW 1 10:00AM 8/24 # NEW 1 2. Press the button to go back to STANDBY mode.
Caller ID System Operation Saving the Name and Number in the Caller List into the DIRECTORY 1. Press the SCROLL UP or DOWN button to find the Caller ID record. redial save/pause 2. Press and hold down the button. The LCD Screen will show “SAVED”. NOTE: It is not advisable to save a telephone number without the corresponding name. This will lead to improper display on PRIVATE and OUT OF AREAcalls. Deleting All Records in the Caller List delete 1.
Caller ID System Operation Viewing the DIRECTORY 1. Press the button. DIR DIRECTORY 10:00AM 8/24 TOTAL No. of records stored 12 2. Press the SCROLL UP or DOWN button to find the record you wish to view, press the SHIFT RIGHT button to view a name or telephone number of more than 11 characters. DIR DIR MICHAEL BROW 604-555-1212 # 8 BROWING 604-555-1212 12 # TOTAL 8 12 TOTAL NOTE: To exit the DIRECTORY List at anytime, press the button. Speed Viewing the DIRECTORY 1. Press the button. 2.
Caller ID System Operation NOTES: 1. It will not save a duplicate telephone number or a name without the corresponding telephone number in the DIRECTOR Y. 2. To delete a character or number inside the cursor, press the delete scan button. PREFERRED CALLS You can assign stored numbers a PREFERRED CALLstatus which will generate a special ringer sound at the start of the second ring to any welcome caller in the DIRECTORY.
Caller ID System Operation 6. Press the SCROLLLEFT or RIGHT you want to change. To erase, press the KEYPAD ~ wxyz button to move the cursor to the number delete scan button. To add, use the TELEPHONE 9 buttons. (See page 31 for details.) DIR MICHAELBROW 604 555 1212 # 8 redial save/pause 7. Press and hold down the 6 cursor is blinking 12 TOTAL button to confirm. IMPORTANT: It is not advisable to save a telephone number without the corresponding name in the DIRECTORY.
Caller ID System Operation NOTE: If you want to save the edited number in the DIRECTORY, follow steps 1 through redial save/pause 5 and then press and hold down the button. Placing Calls from the DIRECTORY 1. Press the button. 2. Press the SCROLL UP or DOWN 3. Press and hold down the DIAL 7 the DIAL 10 DIAL 1+ 1+ 7 * button to find the record you want to call.
Caller ID System Operation Function Operation You can change the settings on the HANDSET through the functions menu. This unit contains the following special functions: A. LANGUAGE F. B. SILENT ON/OFF G. FLASH TIME C. TIME SET H. PAUSE TIME D. RINGER VOLUME I. VOICE MAIL E. LCD CONTRAST J. MSG WAITING menu voice mail To access, press the KEYPAD ~ wxyz 9 , 7 button. * ENGLISH PBX NUMBER K. HANDSET REGISTRATION L.
Caller ID System Operation A. Language This telephone offers English, Spanish, French, and Portuguese languages for your convenience. 1. Press the menu voice mail button. 2. Press the TELEPHONE KEYPAD 3. Press the edit flash 1 button. button. 4. Press the SCROLL UP or DOWN button to select the language you desire. You can also set the language by pressing the following TELEPHONE KEYPAD buttons; 1 for English, abc 2 for Spanish, def 3 for French, or ghi 4 for Portuguese.
Caller ID System Operation 5. Press and hold down the 6. Press the menu voice mail redial save/pause button. button to return to STANDBY mode. NOTE: The date and time will automatically set, if you have subscribed to the Caller ID service from your local telephone company. D. Ringer Volume This function enables you to adjust the ringer volume from HI, LOW, and OFF as desired. 1. Press the menu voice mail button. 2. Press the TELEPHONE KEYPAD 3. Press the edit flash 4 button. ghi button. 4.
Caller ID System Operation 3. Press the edit flash button. 4. Press the SCROLL UP or DOWN button. (OFF is the preset PBX number.) PBX MODE OFF - set for direct line access. 5. Press and hold down the 6. Press the menu voice mail redial save/pause button. button to go back to STANDBY mode. 7 NOTE: When placing a call by using the DIAL 7 1+ * , or the DIAL 10 , or the DIAL1+ # button, this telephone will automatically add the PBX number and a pause time before the dialed telephone numbers. G.
Caller ID System Operation I. Voice Mail This telephone enables you to store the Voice Mail Access Code number in your area. This will automatically connect you to the Voice Mail service provider with one-touch dialing. 1. Press the menu voice mail button. 2. Press the TELEPHONE KEYPAD 3. Press the edit flash wxyz 9 button. button. 4. Enter the Voice Mail Post Code number by using the TELEPHONE KEYPAD wxyz ~ 9 buttons. 5. Press and hold down the 6.
Caller ID System Operation K. Handset Registration The multiple-handset feature allows up to 90 handsets to link to the BASE UNIT. Each new HANDSET has to register into the BASE UNIT to get a 2-digit extension number from 10 to 99. menu voice mail 1. Press the 2. Press the TELEPHONE KEYPAD 3. The “EXT REG” will appear on the LCD Screen. 4. Press the 5. Use the TELEPHONE KEYPAD edit flash button. 7 * button. button. ~ wxyz 9 buttons to enter the name of the extension phone user. 6.