D933 105886-01 Rev.
TABLE OF CONTENTS ■ SAFETY INSTRUCTIONS & WARRANTY iii Safety Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Telephone Wiring and Jack Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ ■ USING THE D933 12 Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Clearing the Voicemail Light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Call Waiting ID (CWID) Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Network Services . . . . . . . . . . . . . . . . . . . . . . . . . .
D933 - 900MHz Cordless SAFETY INSTRUCTIONS & WARRANTY SAFETY SYMBOLS WARNING: This symbol is intended to alert you to the presence of uninsulated dangerous voltage within the product's enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product's case. ■ Read and understand all instructions. ■ Follow all warnings and instructions marked on the unit and in the User Manual. ■ Use only the battery type recommended in this manual.
D933 - 900MHz Cordless ■ Unplug this telephone from the wall outlet and refer servicing to qualified service personnel under the following conditions: - If the power supply cord or plug is damaged or frayed. - If liquid is spilled into the unit. - If the unit is exposed to water. - If the unit does not operate normally by following the operating instructions. - If the unit is dropped or the casing is damaged. - If the unit exhibits a distinct change in performance.
D933 - 900MHz Cordless ■ Do not attempt to recharge the battery pack by heating it. Sudden release of battery electrolyte can cause burns or irritation to the eyes or skin. ■ Remove the battery pack if you do not plan to use the phone for several months at a time. The batteries could leak over that time. ■ Discard “dead” battery packs as soon as possible because they are likely to leak into the phone. ■ Do not store this phone or battery pack in a high temperature area.
D933 - 900MHz Cordless FCC PART 68 I NFORMATION This telephone is hearing aid compatible. This equipment complies with Part 68 of the FCC rules. The FCC Part 68 label is located on the bottom of the product. This label contains the product’s FCC Registration Number and Ringer Equivalence Number (REN). You must give this information to your telephone company if they request it from you. Only use standard modular telephone jacks to connect to the telephone network.
D933 - 900MHz Cordless WARRANTY If your telephone is defective in material or workmanship and you return it within one year from the date of purchase, we will repair it, or, at our option, we will replace it. If we repair it, we might use reconditioned replacement parts or materials. If we choose to replace it, we might substitute an identical reconditioned unit.
D933 - 900MHz Cordless INTRODUCTION The D933 is a 900MHz cordless phone that incorporates your telephone company’s calling features, such as Caller ID, Voicemail and Call Waiting ID, to provide a powerful full function cordless telephone.
D933 - 900MHz Cordless INSTALLING THE D933 C HECK THE C ONTENTS Check to see that the following items are enclosed: ■ ■ ■ ■ ■ ■ ■ ■ ■ Telephone Base and Handset Long Line Cord Short Line Cord for Wall Mounting Desktop/Wall Mount Wedge AC Adapter Two battery packs Belt Clip User Manual Quick Start Card I NSTALL THE H ANDSET B ATTERY Use this procedure to install or replace the battery in the handset. Be sure to follow the battery specifications and safety instructions.
D933 - 900MHz Cordless C HOOSE A L OCATION FOR THE B ASE UNIT The base should be away from all other electronic equipment such as a personal computer, microwave, stereo, or television. It is also a good idea to place the unit away from noisy areas, or from heat sources such as a radiator or direct sunlight. IN THE A DAPTER a. Plug the AC adapter tip into the DC 9V jack on the base and the other end into an electrical outlet. Be sure that the tip is securely plugged into the jack.
D933 - 900MHz Cordless I NSTALL THE TELEPHONE LINE C ORD DESKTOP/WALL M OUNT WEDGE AND You can set your D933 on a tabletop or mount the phone on a wall. T O USE ON A T ABLETOP OR D ESK a. Place the wedge over the upper portion of the base so the arrow points away from the phone. Install the wedge by aligning it over the holes and pressing down and in the opposite direction of the arrow until it snaps into place. b. Plug the long line cord into the phone jack marked TEL LINE. TO M OUNT ON A W ALL a.
D933 - 900MHz Cordless ATTACH THE BELT C LIP You can use the belt clip to hang the handset from your belt. Place the belt clip on the back of the handset. Align the tabs on the belt clip with the slots on the handset. Press the belt clip to the handset to snap the tabs into the slots. Make sure both tabs are securely snapped into the handset slots.
D933 - 900MHz Cordless FEATURES AND CONTROLS Function Keys Voicemail Light Volume Control Keys Review Key ( DIR Key) ( CALLS Key) CALL # 5 Talk Key & Light Exit/Menu Key 5:05PM MAY 5 SMITH JOHN 1-408-555-1234 SAVE 7-10-11 DELETE Headset Jack Voicemail Light DI R TALK REVIEW EXIT MENU CALLS 1 Dial Pad GHI ABC 2 3 6 LINE IN USE 9 SPARE CHARGE JK L 5 MNO 7 TUV 8 WXYZ * OPER 4 PQRS FLASH 0 VOICEMAIL DEF # Line In Use Light Spare Charge Light Handset Charge Light HANDSE
D933 - 900MHz Cordless ■ Volume Control Keys (on the side of the handset) ■ ■ ■ ■ ■ ■ adjust the loudness of the handset or handset ringer. Talk Key is used to access the telephone line. Talk Light indicates your phone is off hook or in use. The light remains solid when the handset is in use. Dial Pad numeric keys are used for dialing. Flash Key allows Call Waiting subscribers to switch between two calls. Hold Key places the existing call on hold and the talk light blinks.
D933 - 900MHz Cordless H ANDSET M ODES IDLE M ODE Depending on the handset’s mode, the functions of the 3 keys below the display vary. 5:05 AM MAY 5 C ALLER ID MODE 3 NEW CALLS REDIAL/P CALL #5 SMITH JOHN 1-800-555-1234 SAVE 7-10-11 DELETE VOICEMAIL ■ Redial / P Key recalls and dials the last phone number dialed. ■ Voicemail Key accesses your voice mailbox if you ■ Save Key saves information to the directory.
D933 - 900MHz Cordless DIRECTORY MODE P ERSONALIZING - DIRECTORY JOHN SMITH 1-408-555-1234 EDIT DELETE ■ Edit Key edits information in the directory. ■ Delete Key erases digits on the display. It can also delete single or multiple entries from the directory. YOUR PHONE You can personalize your phone by pressing the EXIT/MENU key. - MENU - is displayed on the screen. Using the REVIEW key, scroll through the options.
D933 - 900MHz Cordless NETWORK S ERVICES The Network Services option allows you easy access to the network services you subscribe to through your telephone company. To activate a specific Network Service, press EXIT / MENU. Using the REVIEW key, scroll through the options until the arrow is next to NETWORK SERVS and press SELECT (or press 1). Scroll through the options available and press TALK to activate the displayed Network Service.
D933 - 900MHz Cordless -VMAIL SETUPENTER PASSWORD AND # IF NEEDED Enter your password then press SAVE. If you normally press a # after entering your password, add it to the end of your password here too. S ELECTING A DIALING METHOD The D933 dials in either tone or pulse/rotary mode. To select the dialing method, press EXIT / MENU. Using the REVIEW key, scroll through the options until the arrow is next to DIAL METHOD and press SELECT (or press 4).
D933 - 900MHz Cordless USING THE D933 ANSWERING CALLS You can answer a call two ways: ■ Press TALK. ■ Press FLASH to answer Call Waiting calls. USING VOICEMAIL If you subscribe to your local telephone company’s Voicemail Service, you can use your VOICEMAIL key to automatically access your mailbox. (To setup your Voicemail, see “Vmail Setup” on page 10.) When your VOICEMAIL light flashes, or you see the screen display MESSAGE WAITING, press the VOICEMAIL key to access your Voicemail.
D933 - 900MHz Cordless U SING N ETWORK S ERVICES NEED TO KNOW You must disposition the call within 25 seconds of the Call Waiting tone. - MENU OPTIONS 1=VM Sends the new caller to voicemail to leave a message. 2=BUSY Plays a pre-recorded message from your phone company that you are on the telephone and will call them back. 3=3WAY Connects the new caller with the existing call to form a 3 way conference call.
D933 - 900MHz Cordless PRE -DIALING Pre-dialing allows you to enter the number and verify it before placing the call. a. Use the keypad to enter a telephone number. b. Check the number on the display. If the number is wrong, press DELETE to delete the entry digit-by-digit. c. When the correct number is displayed, press TALK to place the call. C ONVENIENCE D IALING You can quickly dial directly from: DIALING FROM C ALLER ID R ECORDS a. Press the CALLS ( ) key. b.
D933 - 900MHz Cordless ADJUSTING THE VOLUME A DJUSTING THE H ANDSET VOLUME a. Press the TALK key. b. Press the or VOLUME key on the side of the handset while the phone is in use to increase or decrease the volume. There are four volume levels. A DJUSTING THE H ANDSET R INGER VOLUME a. Press the or VOLUME key on the side of the handset while the phone is not in use. b. You hear the sound of the ringer as you adjust the volume. The ringer volume can be set at different levels of rings.
D933 - 900MHz Cordless C ALLER ID R ECORDS R EVIEWING C ALLER ID R ECORDS a. b. c. Press the CALLS ( ) key. The newest call is displayed. Use the REVIEW key to move through the call log. Press EXIT / MENU to return to the idle mode. NEED TO KNOW D IRECTORY R ECORDS LOOKING UP R ECORDS IN THE DIRECTORY Looking Up Records Using REVIEW a. Press the DIR ( ) key. b. Use the REVIEW key to find the directory record desired. c.
D933 - 900MHz Cordless c. Press REVIEW to see additional records starting with the letter “R.” d. Press TALK to call the name/number displayed. C REATING YOUR DIRECTORY LIST You can create a personal phone directory containing up to 50 names and numbers. Once you create your personal phone directory, you can automatically dial from the directory. NEED TO KNOW To edit the name and number field, you must be in Directory mode. For details see “Creating or Editing” below.
D933 - 900MHz Cordless Optional Method for Creating a New Record DELETING DIRECTORY R ECORDS a. From the idle screen, enter the phone number. b. Press the SAVE key. Enter or edit the name. - Use the number key pad to enter in characters. Deleting an Individual Directory Record a. Press DIR ( ). b. Use the REVIEW key or look up alphabetically (see “Looking up Records in the Directory” on page 16) to locate the record you want to delete. c. Press DELETE. The following is displayed.
D933 - 900MHz Cordless R EADING DISPLAY M ESSAGES ■ ■ END OF LIST You have reached the end of the directory or call records. Press either REVIEW or to see other records. ■ ■ LONG DISTANCE The incoming call is long distance. ■ MESSAGE WAITING You have a message in your voice mailbox. ■ NAME UNAVAILABLE The person is calling from an area that provides number-only Caller ID service, or you can be in a service area which only shows the number.
D933 - 900MHz Cordless TROUBLESHOOTING PROBLEM / SOLUTION ■ Handset or Base Lockup (Handset or Base does not respond to any key press; display on LCD will not change; no dial tone present) - Reset the phone by removing the batteries from the handset and base. Unplug the power adapter. After 30 seconds, first plug the power adapter back in and then reinstall the batteries in the handset and base. ■ Blank or faint screen - Place the handset in the cradle for several seconds.
D933 - 900MHz Cordless ■ Handset lights do not work - Press the TALK key to test. The talk light should come on. - Recharge or replace the battery. See “Install the Handset Battery” on page 2 for more details. ■ INCOMPLETE DATA - Call information was distorted before reaching the unit. Normal static on the telephone line can cause an INCOMPLETE DATA message. If this condition persists, check with your local telephone company to ensure that there is not a problem with your phone line.
D933 - 900MHz Cordless ■ VOICEMAIL key dials my passcode before the system is ready for it. - Add more pauses to the dialing number. See “Vmail Setup” on page 10. ■ NO DATA SENT - Check your service. Call your local telephone company to ensure that you have Caller ID or Call Waiting ID service. - Check the answering machine. Ensure that your answering machine is set to answer after two rings. - Ensure you answer the call after two rings. - Check Call Forwarding. Ensure that Call Forwarding is turned off.
