Introduction This is an ideal product for checking in-out doors temperature and humidity simultaneously. fl consists of a transmitter and a weather station Features of the Transmitter Transits outdoor temperature and humidity data at 433 MHz 10 weather station Measure outdoor temperature & humidity automatically LCD display shows time, temperament and humidity Temperature in Celsius or Fahrenheit ‘Wall-mounted bracket Test mode “SIRE Eff 8:30 AE 1. LCD display Tan TER 2.
mE we TEMPERATURE HUMIDITY sf 216 Bw | Time Temperature Humidity Alm mode Alarm is on “Fest mode is switched on Flashing when signals are transmitting. . Low battery Features of the Weather station: Indoor temperature operating range from 0°C to 50°C with 0.1 resolution, Outdoor temperature operating range from -20°C to 60°C with 0.
LCD display of ihe Weather Station 2 — Weather report symbol . Test mode is switched on moms Humidity measured by transmitter . Temperature treasured by transmitter 0. The transmitter is in low battery = Flashing antenna means receiving signals from humanities Normal time Alana is on. Indoor humidity Indoor temperature Weather Report Symbols The weather repaint icons show weather tendency. Weather report symbols are mainly classified into 3 types [A —.
Getting started: wom Remove both units from the packaging. Insert 2 new AAA size batteries in the transmitter and cheek the display. Default tine and temperature & humidity data should be displayed after fow seconds. Insert 3 new AA size batteries in the weather station and cheek the display. Default time and temperature & humidity data should be displayed after few seconds. Follow the instructions on page 9, sel both units to current line. Follow.
TIME SET MODE: Alarm time setting: . Press ® MODE" once to read the preset anal time. To set the alarm time , press MODE key twice to enter this mode, “How” unit is flashing Press * SET" key te adjust ihe figure that you want. Press " MODE" key , the ” MINUTE” unit is flashing Press” SET" key lo adjust the minute aud release it when your desired time is reached. Press AL. ON/OFF key in normal mode can toggle alarm on/off, aw pe Normal time setting: 1.
Place structure The weather station attached with a table stand ond the transmitter attached with wall mount bracket 10 place it in a certain place, X Wall mount bracket DF stapler Table snd ‘Weather station Transmitter “The weather station has implemented a DC adapter socket which allow external DC power supply. Using external DC adapter with inverted polarity or improper voltage may damage the weather station. Please make sure to set (hie DC adapter at comet polarity and correct voltage.
Maintenance Do not submerge the transmitter and weather station in water. Do not subject (he nits to unnecessary heat of cold. Do ot place tho wits near metal. Do not try to pen the units. Ensure both transmitter and weather station sre placed vertically. Extreme temperatures , vibration and shock should be avoided. Remove battery if you are not intended to use the units for a long time. Troubleshooting and solution 1.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate he equipment. NOTE: This equipment has been tested and found to comply wile the limits for a Class 8 digital device, pursuant to Part 16 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Installation.