WIRELESS WEATHER STATION C-8123/C-8153 USER’S INSTRUCTIONS P17812300030
The multifunctional weather station is equipped with many functions providing thorough weather information to you. The receiver unit has a clear, easy-to-read display that shows weather forecast, indoor temperature, relative humidity, pressure, moon phase, time and date, as well as the temperature and relative humidity measured and transmitted by the sensor. It is able to receive and display readings from up to 3 remote sensors.
RF transmission frequency: No of remote unit: RF transmission range: Temperature sensing cycle: Pressure measuring range: Pressure sampling cycle: Moon phase scanner range: Radio controlled signal: Power: Main unit: 433MHz up to 3 units Maximum 30 meters around 60 ~ 64 seconds 800mb to 1050mb 15 minutes From 2000 to 2050 DCF77, MSF, WWVB MAIN FEATURES: WEATHTER STATION: 4.5 V, use 3 x AA 1.5V alkaline battery 3 V, use 2 x AAA 1.
1. TIME: - Press it once to view the year. - Press and hold it for 2 seconds to enter the time setting mode. SPECIFICATIONS (The humidity data and moon phase is for C-8123 only) MAIN UNIT 2. ALARM: - Press it to switch to alarm and temperature alarm. - In alarm mode, press and hold it for 2 seconds to enter the alarm and pre-alarm setting mode. 3. UP: - In normal time mode, press it to choose between channel (1), (2) and (3). - In setting mode, press it to increase the setting value.
- In case of mal-function, the unit may be required to reset. USING THE TABLE STAND OR WALL MOUNTING The receiver has both desk-top and wall-mounting structure. Fix the separate wall-mounting stand on the wall by screws. Push the stand of the clock upward, hang it on the wall-mounting stand by its recessed holes. For the transmitter, fix the wall-mount holder on the wall or simply place it on the table. 8. ºC / ºF: - Switch between ºC / ºF. 9. mb/hPa . inHg: - Switch between mb/hPa or inHg. 10.
current temperature, current humidity or the maximum or minimum recorded temperature and humidity. (For C-8153, only temperature is displayed) 16. CALENDAR WINDOW: - Displays the date, year, day of the week and moon phase. (C-8153 is without moon phase) 17. CLOCK WINDOW : - Displays the time and radio controlled signal. LOW BATTERY INDICATOR When the battery does not have enough power to operate the unit, the low battery indicator will appear to remind you to replace with new batteries.
ABOUT THE MOON PHASE (C-8123 ONLY): 8 The unit has 8 different moon phases. It will change according to the lunar calendar. 1. 2. 3. 4. 5. 6. 7. 8. New moon Waxing crescent First quarter Waxing Gibbous Full moon Waning Gibbous Last quarter Waning crescent 9 1. LED indicator: - Flashes when the remote unit transmits a reading. 1 8 2 3 4 5 7 6 2. LCD: - Displays the current temperature and humidity monitored by the remote unit alternatively. (For C-8153, only temperature record is displayed). 3.
5. RESET: - Return all values to default value. 6. Battery compartment: - Accommodates 2 AAA size batteries. 7. Battery door 8. Wall mount holder: - Supports the transmitter in wall mounting. 9. Folding table stand BEFORE YOU BEGIN TRANSMITTER: PAST 24 HOURS PRESSURE RECORDS 1. Remove the removable stand, unscrew the screws of the back cover and lift the cover off. 2. Insert 2 x AAA batteries into the battery compartment.
2. The weather forecast is meant for next 12 to 24 hours. It may not necessarily reflect the current situation. 3. The “Sunny” icon, when applies to nighttime, implies clear weather. Slightly cloudy NOTE: Cloudy TENDENCY 1. Once the channel is assigned to a transmitter, you can only change it by removing the batteries or resetting the unit. 2. Avoid placing the transmitter in direct sunlight, rain or snow. TENDENCY Rainy 5.
2. T h e b u i l d i n g m a t e r i a l a n d t h e p o s i t i o n o f t h e receiver and transmitter affect the effective range. So try various locations will help to obtain the best result. 3. Place the units away from metal objects and electrical appliances to minimize the interference. Position the r e c e i v e r a n d t h e transmitter within effective transmission range: 30 meters in usual circumstances.
MAX. Temperature / humidity record Slightly cloudy Cloudy CH % TENDENCY TENDENCY % Rainy Storm Sunny MIN. Temperature / humidity record TENDENCY TENDENCY CH % IN % NOTE: 1. Do not set the weather indicator when it is raining. Raining will give unstable data. 2. Do not set the weather indicator in night time. WEATHER TREND RECEPTION OF RADIO CONTROLLED TIME SIGNAL The temperature-trend, humidity-trend and pressure-trend indicators show the trends of changes for the last few minutes.
When used for the first time (after inserting the batteries or pressing RESET), the clock starts receiving time signals and the reception display flashes. If the readings go above or below the specified range, the receiver and transmitter will keep show the last record within the operation range. SIGNAL STRENGTH INDICATOR NOTE: The signal indicator displays signal strength in 3 levels. Wave segment flashing means time signals are being received.
2. Press and hold the ALARM key for 2 seconds, pre-alarm time flashing, press UP or DOWN key to change its value. NOTE: SELECT THE TIME ZONE (FOR WWVB VERSION ONLY) To activate pre-alarm function, ALARM must be on.
5. After setting completed, press TIME key to exit setting mode, or let it exit automatically in 30 seconds without pressing any key. English Germany SON French DIM MON DIE MIT DON LUN FRE SAM VEN MAR MER JEU SAM Spanish DOM LUN MAR MIE JUE VIE SAB Italian DOM LUN MAR MER GIO VEN SAB NOTE: 1. The alarm will automatically turn on when setting the alarm time. 2. The EL backlight will keep on for 5 seconds when the alarm is sounding. 3.