Foreword Features Congratulations on buying this clansman W100 lama system, Installing the manors Powerful 00 alarm system is easy and quick. Before using the product we recommend Support entry and exit delay reading the manual first. There are some parts of the installation which have to be Support 6 emergency numbers done in the right order to complete the Installation successfully.
Table of Contents Included Accessories Overview of Alarm Pang Preparation Before Use Power Crt Instillation Alarm Panel Operation Arm Disarm Home Made(Part arm) SOS Admin Code User Code Burgess Code Restore to Factory Meting APP Operation Download Application Connect WiFi to Alarm Panel Disarm, Atm and Home arm History Wireless Siren Setup Alarm Panel Setup Set Password For App Remote Phone Control Test and Install Accessories 1.
Included Accessories Please check whether the package contains the flowing items. If rot, please contact the retailer, W100 Alarm Panel x 1 WL0Q alarm panel is the "heart and brain® of the whole system, which is for receiving and processing the signals from wireless detectors and remote controls, When the alarm is triggered, the sound can deter intruders on sie and there will ke send a push message to the application on your smartphone.
03 Overview of Alarm Panel LED Indication LED Meaning LED Manning Front “on 508 fi . ape In network Sep status setting mode “4 Zone 1 alarm Ter Tamper alarm “oer Zone 2 lama LED Serene LL Line-cut alarm Home Mode 508 Disarm Anti © Note: The keypad will be blocked and starts flashing once In every 3 seconds in case of iow i battery. Touch Keypad B Wi Indicator Preparation Before Use GLOW is a WIFI/PSTN dual network alarm system.
Power On 1 Plug the output connector of AC adapter into the power jack of the control panel. 2: Plug the AC adapter to 3 power outlet. from i Slide the power switch from OFF fo ON. Installation fut on the able and start to use.
Home Mode (Part Arm) Press Home (3) | button, the alarm panel beeps once and the LED light tuned on. The system is in home made state. In the home rode, sensors setting home zone are in disarmed state; other sensors are still in armed site. That is, you can move freely in the home zone; however, the rest areas are steel being protected, Note: The PIR detector is set to hae zone by default. That is, PIR detector will not trigger an anal after you set the shysters in i home mods.
Duress Code When threatened ts possible to disarm the stern silently and let the system dial restored phone numbers silently by using the duress code, Input admin code and press [ #1, the alarm panel beeps once. When displayed on the LED screen, it means the alarm panel is in sating mode, Input “3% new duress code, Press | Arn] button to exit setting mode, Admin cote # #3% New duress code” i Note: The default setting of duress code is Admin code, user code and duress code ane | + afl consist of 4 sights.
Connect WIF! to Alarm Panel 1. Press { #1, enter admin code. Then press and hold | #1 again for 3 seconds, the alarm panel beeps once. When A% multiplayer an the LED screen, it means the alarm panel is Tn WIGHT setting mods. # Admin code ¥ WIS 3. The WiFi setup interface appears when firstly enters the App. Input the local network's WiFi name and password, press [Setup WiFi, One beep is heard from the alarm panel. When [Wi 4% | icon flashes quickly, means the alarm panel is online.
Disarms, Arm and Home Arm Tap [ Disarm (8) ] icon, the sensors Tap Arm 3] eon, the sensors synchronized with alarm panel will be synchronized with alarm panel will be disarmed. armed. Tag [ Home (3 can, the sensors in home mode zone that is synchronized with alarm panel will be disarmed, Other normal zone sensors synchronized with alarm panel remains in am state. History Tap | 2] ] icon, the latest 20 records of alarm and operation information can be raced.
Tp | Sensors 1. afl connected sensors displayed, @) Edit sensor name (See page 42-45 about the connecting way). Ris suggested not 16 exceed 20 characters, i 1%] kon in orange means the sensor ls synchronized with the lama panel, Otherwise, Nests Char the alarm panel is alarming, the LETS screen will display the number of the i § {6 icon in crane means the assessor i in am state. triggered sensors.
@ sensor zone Each sensor can be placed in a zone. Three different zones can be selected. The home Zane, normal zone, 24 hour zone. The zone type of the 24 hour zone sensors can't be edited. Normal Zane sensors: When the alarm panel is in arm or in home mode state, the sensors in normal Zane will be in armed state. Home zone sensors: In home made, sensors set to home zone are In disarmed state; the other sensors are still in armed state.
Alarm Panel Setup Tap (Pane! Settings I) and enter the alarm panel setup menu. Internal Siren Volume Tap [Volume] to chose the alarm volume level: mute, low and high. The default setting is high. 19 Ringing Time Tap [Ringing time] to set internal siren alarming duration from 1 1 @ minutes. Default setting is 1 min. Store Phone Numbers Tap | Phone numbers | to enter the interface for alarm phone number storage, § emergency phone numbers can be stored.
Back light Time Line-Cut Alarm Tap Back light time] to set the lighting time period from 0 to 98 seconds. Default Slide the switch to tum on/off the line cut alarm function. Line-cut alarm means. setting Is 10 seconds. whenever the telephone fine is cut off the system will alarm immediately. Answering Rings Pass code Log Tap [Answering rings] to set the ringing times from means to turn off the This function Is to prevent users operating by mistake.
Exit Delay Time Tap {Ext delay time] to set the de home. time from § to 299 seconds for arming when edt Entry Delay Time Tap (Entry delay Noel to set the delay ime from § to 299 seconds for alarming when enter home. Note: ¥ users Grit want to carry along remote controls, they can set the entry or ext delay. © Suppose entry delay was set at 30 seconds, the system wii allow users 30 seconds to disarm i the system before alarming.
Set Password For App Tap [ooo] ~ [Set password] te set whether to tum an/off the operation code for App. ‘When it is turned on, users can only login the operation interface by inputting the context code. } Meter Ts recommended to set the App code for your safety, Any App that completed the network connection alarm pane! will receive the push message when alarming, f you don't want to revive i, please unload the App.
Test and Install Accessories Accessories in this kit can work only with its own control panels. 1. Test and Operate the Remote Control RE2300 remote control is delicate and easy to carry. I can be attached 10 your key dng, or just put into your pockets or purses. When you are about to exit or entry the house, you can use Tt te arm or disarm the stern. In case of any emergency, just press the SOS! button, the alarm will be activated immediately.