User's Manual

ManualsBrandsChuango Security Technology ManualsElectronicsP.I.R. Motion Detector

Table Of Contents

Appearance

1. Detection window

2. LED indicator

3. Bracket

PIR-900

Operation Manual

Wireless PIR Motion Detector

(For Indoor Use)

Infrared sensor:

Tamper switch:

It detects the infrared rays released by

human body motion, please don’t touch the surface and

always keep it clean.

Once the case is opened in working state,

the tamper switch will be triggered and then generates

an alarm signal.

PCB Layout

Infrared sensor

Tamper switch

Zone setting

AA 1.5V LR6

LED ON / OFF

Usage

Open the case and remove the battery activation strip to

activate batteries. It will start self-testing for one minute.

LED Indication

Flash conti nuously:

Flash once:

Flash twice:

Flash once per 3 seconds:

Under the self-testing state.

Intruder is detec ted.

Self-testing is finished, enters the worki ng mode.

Under voltage indication, please

change the batt eries immediately.(User will get alert SMS about

the low batt ery if the PIR detec tor is connect ed to the GSM

alarm system.)

1. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the

party responsible for compliance could void the user's

authority to operate the equipment.

Features

FCC Statement

PIR-900 is a high performance wireless P.I.R. motion detector.

It consists of digital dual-core fuzzy logic infrared control

chip and intelligent analysis which effectively identify

interference signals from body movement signals and reduce

false alarm rate. With automatic temperature compensation

and anti-air turbulence technology, it easily adapts to

environmental changes. The detector also has the advantages

of energy saving, reliability and easy installation.

Summary of content (2 pages)

PAGE 1
Wireless PIR Motion Detector (For Indoor Use) PIR-900 Operation Manual Features LED Indication PIR-900 is a high performance wireless P.I.R. motion detector. It consists of digital dual-core fuzzy logic infrared control chip and intelligent analysis which effectively identify interference signals from body movement signals and reduce false alarm rate. With automatic temperature compensation and anti-air turbulence technology, it easily adapts to environmental changes.
PAGE 2
Mode Setting Top view Side view Fix the bracket on the wall with screws and attach the detector to the bracket. Adjust installation height or bracket to change the detection distance and angle. It is recommended to mount it at the height of 2m from the ground. The detector is more sensitive to the cross movement than to the vertical movement, so the performance of detector is best when the detection direction is vertical to the walking direction of people.