MD-20 Pet-Friendly Motion Sensor EN © 2017 SMANOS HOLDING LTD. All Rights Reserved. Printed in China Ver: MD-20-UM-ML-V1.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Introduction The MD-20 Pet-Friendly Motion Sensor is a sensor that detects suspicious motion while ignoring motion from your pets under 50 lbs / 23 kg. The sensor is suitable for homes & small business/ offices. The most common placements are in livingrooms, lobbies, hallways & garages to name a few. The detection range is between 0 & 9m/0-29' straight ahead. Please keep this in mind when placing keeping in mind windows where unwanted, outside activity can be easily picked up.
N N N N LED Indicator Blinks once: Motion detected. Blinks once per 3 seconds: Low battery, please change the batteries. Tamper Switch Pet-Immune Function Illustration ;6 ɑ Anti-tamper protection ensures that any attempts to remove the battery cover /mounting plate results in an alarm and push notification and possible email if selected.
Mounting Important: Make sure the UP mark on the Back Cover is pointing up before mounting the MD-20 on a flat surface. Once level, mount the mounting bracket to the wall using either the double face take or the mounting screws with mollys, both of which are included in the package. 2-2.2 m (6.6’-7.3’) Mounted on wall or corner at a height of 2-2.2 meters (6.6'-7.3') from the floor.