User's Manual

1
1.
Loosen & remove
the locking screw
from the bottom
edge of the unit
counter clockwise.
3.
Insert 4 x 1.5V
A
lkaline LR14
batteries with
correct polarity.
+
-
-
-
+
+
+
-
HSE03 Voice Siren & Strobe Light
Installation Instruction
GENERAL INTRODUCTION
The HSE03 is a two-way wireless alarm which functions
not only as a siren, but also has vocal alert sound and
strobe light. Unlike any other siren alone or strobe alone
products available in the market, this unique three-in-one
device integrates functions of siren, vocal alert and strobe
light into one unit.
The vocal alert sound can play high quality voice or
music to guide the user and the siren can generate 110dB
noisy sound in order to frighten the intruder。The unit is
sold individually, but its great compatibility with our UN e t
family security products makes it easier for you to add
additional accessories to suit your specific needs.
The HSE03 includes the following features:
Adopt UNet protocol to secure the success of wireless
two way communication
Can download 45 or 90 second of high quality voice
files from USB port
Different speak content of the HSE03 correspond to
different trig event.
110dB siren sound
With Red flashing strobe light
With Tamperproof protection
Visual and audible alarm indications
Low battery indication
Very low power consumption (3years battery life at
standby mode)
Either 4 x Battery or DC 6V adaptor for the power supply
PRODUCT LAYOUT
A. Speaker and strobe
LED light indicator
E. USB
B. Piezo F. DC Jack
C. Tamper Switch
D. Learning Key
Functions
A. Speaker and strobe LED
light indicator
Two color LED (red & green)
B. Piezo Generate 110 dB siren sound
C. Tamper Switch A full alarm condition will be
initiated if the unit is removed from
the wall.
D. Learning Key Learning and clearing ID codes.
E. USB To download the wav file from PC
to HSE03
F. DC Jack Socket for connecting DC adapter
POWER SUPPLY & BATTERY STATUS
Four pieces 1.5V Alkaline LR14 batteries are supplied in
the HSE03. An optional 600mA @ 6V DC power adapter
can be purchased if needed. If HSE03 is used as a
control unit, to ensure a sufficient power supply, a DC
adapter is strongly recommended. A red LED flashes at
every 30-second interval indicates the battery power is low.
When this situation occurs, replace the batteries as soon
as possible.
INSTALLATION
To Install Batteries
To Install Power Adapter (Optional)
2.
Slide the
backplate
out of the
unit.