Christie NAS-S2 User Manual 020-101656-01
Christie NAS-S2 User Manual 020-101656-01
NOTICES COPYRIGHT AND TRADEMARKS Copyright ©2014 Christie Digital Systems USA Inc. All rights reserved. All brand names and product names are trademarks, registered trademarks or trade names of their respective holders. GENERAL Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this document. Christie reserves the right to make changes to specifications at any time without notice.
REGULATORY The product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a commercial environment. The product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
China RoHS Compliance Information ޣҾѝഭ lj⭥ᆀؑӗ૱⊑ ḃ ᧗ ࡦ ㇑ ⨶ ࣎ ⌅ NJ Ⲵ 䈤 ᰾ • Environmentally Friendly Use Period ⧟ ⭘ ֯؍ᵏ 䲀 The year number in the centre of the label indicates the Environmentally Friendly Use Period, which is required to mark on the electronic information product sold in China according to the China RoHS regulations.
Addendum Translated copies of this document are provided on the CD in the back of this document. The CD may also contain additional product documentation. Read all instructions before using or servicing this product. ᵜ ᮷ ẓ Ⲵ 㘫䈁࢟ᵜ൘ᵜ᮷ẓ㛼䶒Ⲵ CD кᨀDŽ䈕 CD ѝ䘈ਟ㜭वਜ਼ަԆӗ૱᮷ ẓ DŽ ֯ ⭘ ᡆ㔤؞ᵜӗ૱ѻࡽ䈧࣑ᗵ䰵䈫ᡰᴹ䈤᰾DŽ 㔯 ẞ 側 朊 䘬䡇㍸ὃḮ㛔㔯ẞ䘬侣嬗∗㛔ˤ忁⻝䡇⎗傥⎎⢾⊭⏓℞Ṿ䓊⑩㔯 ẞ ˤ 婳 ⃰ 教嬨㚱㊯䣢ℵἧ䓐ㆾ復ᾖ㛔䓊⑩ˤ Le CD au dos de ce document contient des traductions de celui-ci dans différentes langues.
Table of Contents Installation and Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Preconfigured setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Customized setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation and Setup This section provides information and procedures for installing and configuring the Christie NAS-S2. Two installation methods are available; preconfigured and customized. The preconfigured set up uses the default settings provided by Christie. Use the customized set up to customize the network settings. You can use the projector touch panel controller (TPC) menus or the web interface to set the communication settings between the Christie IMB-S2 and the Christie NAS-S2.
Installation and Setup 3. Connect the other end of the Ethernet cable to the NAS 1 port (B) on the Christie IMB-S2. B 4. Connect the Christie NAS-S2 to AC power. 5. Turn the projector and the Christie NAS-S2 on. 6. Verify the NAS 1 IP address for the Christie IMB-S2 is configured correctly: a. On the projector touch panel controller (TPC), tap Menu > Christie IMB > System. b. Tap the IMB Network tab. c. Confirm the IP address displayed in the IP Address field is 192.168.1.100.
Installation and Setup 10. Complete these fields: Field Description IP Address 192.168.1.101 (the Christie NAS-S2 Ethernet Port 1 IP address) Subnet Mask 255.255.255.0 Default Gateway 0.0.0.0 or Christie NAS1 port IP address 11. Click OK. 12. Add your computer to the subnet of the NAS device: a. On the computer, click Start > Control Panel. b. Click Network and Sharing Center. c. Click Change adapter settings in the left pane. d. Right-click a network connection and select Properties. e.
Installation and Setup 4. Create a network share: a. Click Privilege Settings in the left pane. b. Click Shared Folders in the right pane. c. Click Create > Shared Folder. d. Type Content in the Folder Name field. e. Select a disk volume for the share. f. Click Edit in the Configure access privileges for users area. g. Select RW. h. Click Create. Verify NFS is enabled and disable standby mode 1. Open the Christie NAS-S2 management application interface: a. Open a web browser. b. Enter http://192.168.1.
Installation and Setup 2. On the projector TPC, tap Menu > Christie IMB > System. 3. Tap IMB Network. 4. In the NAS 1 area, select Static IP and then complete these fields: a. Enter 192.168.1.1 in the IP Address field. b. Enter 255.255.255.0 in the Netmask field. Unless it is required for your installation, leave the Gateway field blank. 5. Select DHCP in the NAS 2 area. The IP address for port 2 must not be on the same subnet as port 1. In this example, it cannot start with 192.168.1.x 6. Tap Save. 7.
Installation and Setup 3. Click Network on the desktop. 4. Click Privilege Settings in the left pane. 5. Click Users in the right pane. Christie NAS-S2 User Manual 020-101656-01 Rev.
Installation and Setup The Christie NAS-S2 management application interface This illustration shows the primary screen elements of the Christie NAS-S2 management application: Item Description A Shows or hides the main menu. B Shows the desktop. C Shows the background tasks currently running. D Shows all external devices currently connected to the Christie NAS-S2 USB and eSATA ports. E Shows error and warning messages. Click Event Notifications to view system logs.
Backup and Recovery This section provides information and procedures for protecting the Christie NAS-S2 from power failures and restoring system settings. Connect the Christie NAS-S2 to a UPS Connect your Christie NAS-S2 to an Uninterruptible Power Supply (UPS) to protect it from an unexpected power disruption. Two options are available when a power disruption occurs: • Automatically turn the Christie NAS-S2 off after a specific period.
Backup and Recovery b. The system will enter “auto-protection” mode after the AC power fails for minute(s) Select this option if you want the Christie NAS-S2 to wait a specific period before entering auto-protection mode. Enter the number of minutes to wait before entering auto-protection mode. 12. Click Apply All. Manage the UPS with the SNMP protocol 1. Connect the Christie NAS-S2 and the UPS to the same physical network. 2. Open the Christie NAS-S2 management application: a.
Backup and Recovery b. Enter http://192.168.1.101:8080 in the Address field. c. Press Enter. 3. Enter your user name and password and press Enter. 4. Click Storage Manager on the desktop. 5. Click Storage Pools in the left pane. 6. Select a raid group in the RAID Group area (A). 7. Click Manage > Recover. 8. Back up your data: a. Click Search. b. Type backup. c. Click Backup Server. Update the Christie NAS-S2 firmware 1. Download the Christie NAS-S2 firmware from the Christie web site (www.
Troubleshooting This section provides information and procedures for resolving common projector issues. If you cannot resolve a projector issue, contact Christie support. View the system logs 1. Open the Christie NAS-S2 management application interface: a. Open a web browser. b. Enter http://192.168.1.101:8080 in the Address field. c. Press Enter. 2. Enter your user name and password and press Enter. 3. Click System Logs on the desktop. View Christie NAS-S2 status information 1.
Troubleshooting Christie NAS-S2 status LEDs This table provides descriptions of the Christie NAS-S2 status LEDs: LED Activity Flashing red and green Description • The network attached storage (NAS) hard drive is being formatted. • The NAS is being initialized. • A system firmware update is in progress. • The redundant array of independent disks (RAID) are being rebuilt. • The RAID capacity is being expanded. • An online RAID migration is in progress. Solid red • The hard drive is invalid.
Troubleshooting LED Activity eSATA Description Flashing orange • A device is being accessed. Off • A device is not connected or detected. Christie NAS-S2 audible alarm The audible alarm indicates the Christie NAS-S2 operational status.
*000-105233-01* ASSY TECH DOCS Christie NAS-S2 Corporate offices Worldwide offices USA – Cypress ph: 714-236-8610 Australia ph: +61 (0) 7 3624 4888 Canada – Kitchener ph: 519-744-8005 Brazil ph: +55 (11) 2548 4753 Consultant offices China (Beijing) ph: +86 10 6561 0240 Italy ph: +39 (0) 2 9902 1161 China (Shanghai) ph: +86 21 6278 7708 Eastern Europe and Russian Federation ph: +36 (0) 1 47 48 100 France ph: +33 (0) 1 41 21 44 04 Germany ph: +49 2161 664540 India ph: +91 (080) 6708 9999 Singapor
For the most current technical documentation, please visit www.christiedigital.
