Instruction manual Touch-itsCE OEM glass 7 12/2021 www.christ-es.
Touch-it CE OEM glass 7 Instruction Manual 1 Identification 3 2 Product description 5 2.1 Housing Variant CE OEM glass 3 6 Description Hardware 10 3.1 External Interfaces 4 10 Environmental Conditions 12 4.1 IP Protection Class 5 12 Assembly and Commissioning 13 5.1 Mounting CE OEM glass 6 7 8 9 14 Maintenance 15 6.1 Cleaning 15 6.2 Maintenance 15 Technical Data 16 7.1 Mechanical Specifications 16 7.2 Electromagnetic Compatibility 16 7.3 Environmental Conditions 16 7.
Touch-it CE OEM glass 7 Instruction Manual 1 Identification Target group This document is not intended for end customers! Necessary safety instructions for the end customer must be passed on by the machine builder or system provider and adopted in the respective national language. Intended use This product has not been designed, developed and manufactured for use that creates fatal risks and hazards without exceptionally assured safety measures.
Touch-it CE OEM glass 7 Instruction Manual Design of safety instructions DANGER Indicates an imminent danger Failure to follow the instructions may result in death or serious injury WARNING Indicates a dangerous situation Failure to observe this warning may result in serious injury or major damage to property CAUTION Indicates a possible dangerous situation Failure to observe the advice can result in injuries or property damage NOTICE Indicates user tips and useful information Important information to a
Touch-it CE OEM glass 7 Instruction Manual 2 Product description Every industry has its own requirements for machine and system operation. To meet all of them, there are different housing variants with industry-specific features. Above all, special areas of application or special environmental characteristics demand the greatest possible adaptability in the design of the touch panels. In order to meet any requirements, Christ develops so-called OEM solutions.
Touch-it CE OEM glass 7 Instruction Manual 2.1 Housing Variant CE OEM glass Illustration 1: CE OEM glass Front Illustration 2: CE OEM glass Rear 1 Customised Mounting 2 Control Element Area Table 2: CE OEM glass Front and CE OEM glass Rear Illustration 3: Dimensions CE OEM glass Size A B C 7" 270 218.5 79* Table 3: Dimensions CE OEM glass * With interfaces and control elements up to 145.2 mm Document No.: PA10009463 6 / 24 Dez.
Touch-it CE OEM glass 7 Instruction Manual Illustration Properties Pushbutton Series SHORTRON® base-plate mounting Degree of protection IP65 Travel 2.3 mm Illumination Yes, white LED Labeling Option Yes Front Bezel Silver-Coloured Operating Temperature -25°C ... 70°C Contact Elements max.
Touch-it CE OEM glass 7 Instruction Manual Illustration Properties Emergency Stop Series QUARTEX®-R Type QRUV Degree of protection IP65 Illumination No Labeling Option No Front Bezel Yellow Operating Temperature -30°C ... 70°C Contact Elements max. 5 (NC / NO) Switching Position Indicator Yes Release Twist right or left Anti-lock Collar Yes Table 4: Compnents of the Control Elements Illustration 4: Positions of the Control Elements Document No.: PA10009463 8 / 24 Dez.
Touch-it CE OEM glass 7 Instruction Manual P1 Push Button, non latching, normally open, C1 24 VDC, transparent lens, lighted, labelled P2 Dummy Plug P3 Push Button, non latching, normally open, C1 24 VDC, transparent lens, lighted, labelled P4 Keylock Switch, latching, normally open, 1 x 90°, Shape V, 1 x key re-movable position (left) P5 Push Button, non latching, normally open, C13, C14 and C23, C24 floating, transparent lens, lighted P6 Dummy Plug Emergency Stop 1 x Emergency Stop Document
Touch-it CE OEM glass 7 Instruction Manual 3 Description Hardware 3.
Touch-it CE OEM glass 7 Instruction Manual Binder 09 3732 90 04 PIN Function Description 1 TX + Transmit Data + 2 RX + Receive Data + 3 TX - Transmit Data - 4 RX - Receive Data - Table 7: Pinout Binder 09 3732 90 04 Document No.: PA10009463 11 / 24 Dez.
Touch-it CE OEM glass 7 Instruction Manual 4 Environmental Conditions WARNING Insufficient air supply to the device Overheating ➢ 4.1 Never cover the device completely or operate it in a small, unventilated housing IP Protection Class The protection class only can be guaranteed under the following conditions: • The device is installed correctly • All components and covers of the interfaces are assembled • Compliance with all environmental conditions Document No.: PA10009463 12 / 24 Dez.
Touch-it CE OEM glass 7 Instruction Manual 5 Assembly and Commissioning This chapter describes all the steps for assembly. The following warnings are safety instructions that must be applied throughout the assembly chapter and in every other life cycle of the device.
Touch-it CE OEM glass 7 Instruction Manual 5.1 Mounting CE OEM glass Illustration 5: Mounting CE OEM glass The unit is mounted on the marked threaded bolts. The customer determines the fastening utensils and the tightening torque. Christ accepts no liability for damage caused by this fastening. Document No.: PA10009463 14 / 24 Dez.
Touch-it CE OEM glass 7 Instruction Manual 6 Maintenance The following chapter describes maintenance measures that can be performed by a qualified end user. 6.1 Cleaning DANGER Triggering unintended functions Loss of control of the plant / machine / device ➢ The unit may only be cleaned when it is switched off or unplugged. To clean the device, use a soft cloth moistened with detergent solution or screen cleaner. The cleaning agent must not be applied directly to the device.
Touch-it CE OEM glass 7 Instruction Manual 7 Technical Data 7.1 Mechanical Specifications Housing Aluminium / Silver, Black Weight max. 1.5 kg Dimensions See Table Dimensions Mounting Customised Mounting Cooling Passive Table 8: Mechanical Specifications 7.
Touch-it CE OEM glass 7 Instruction Manual 7.4 Display Specifications Color Depth 8 bit Lifetime min. 50,000 h Viewing Angle (right/left/up/down) min. 85°/85°/85°/85° Backlight LED Touch Technology PCAP Table 11: Display Specifications NOTICE Pixel Errors Due to the manufacturing process, displays may contain faulty pixels (pixel errors), which do not constitute a claim or warranty. Document No.: PA10009463 17 / 24 Dez.
Touch-it CE OEM glass 7 Instruction Manual The international standard ISO 9241-307:2009 defines, on an international level, the maximum possible pixel errors in an LC-display. This standard discribes different error types, in consideration of different pixel error classes. There are the following pixel error classes, each with three differnet error types: Maximum acceptable errors per 1 Mio.
Touch-it CE OEM glass 7 Instruction Manual To avoid "ghost images" or "image shadows", the following behaviour is recommended: • Do not display still images over an extended period of time • Change standing images at short intervals • Switch off the unit or use the energy-saving mode when you do not need it • Use the screen saver function Document No.: PA10009463 19 / 24 Dez.
Touch-it CE OEM glass 7 Instruction Manual 8 Standards and Approvals 8.1 CE Marking The device has been tested in accordance with the applicable EU directives and the associated harmonized standards. NOTICE Decleration of Conformity The declaration of Conformity can be downloaded from the Christ Electronic Systems Homepage. 8.2 RoHS The device complies with the requirement of the EU Directive RoHS 2011/65/EU. 8.
Touch-it CE OEM glass 7 Instruction Manual cause harmful interference in which case the user will be required to correct the interference at his own expense. Validity Touch-it CE OEM glass 7, Prod. ID: PA10006882 Touch-it CE OEM glass 7, Prod. ID: PA10xxxxxx Where "xxxxxx" in the ID Number may be any numeric characters. These models are variants of the Touch-it CE OEM glass 7 and are different regarding the interface connectors and the pushbuttons. These variants are subset of the ID: PA100006882.
Touch-it CE OEM glass 7 Instruction Manual 9 Technical Support Despite the highest quality standards and detailed function tests of all our products, daily use of our devices can always lead to damage or failure of a wearing part. The failure of a machine in production costs a lot of money. That is why the Christ company processes complaints as quickly as possible. You can send the device to us without prior notice.
Touch-it CE OEM glass 7 Instruction Manual Index of Illustration Illustration 1: CE OEM glass Front 6 Illustration 2: CE OEM glass Rear 6 Illustration 3: Dimensions CE OEM glass 6 Illustration 4: Positions of the Control Elements 8 Illustration 5: Mounting CE OEM glass 14 Illustration 6: Name Plate 21 Document No.: PA10009463 23 / 24 Dez.
Touch-it CE OEM glass 7 Instruction Manual Index of Tables Table 1: History 3 Table 2: CE OEM glass Front and CE OEM glass Rear 6 Table 3: Dimensions CE OEM glass 6 Table 4: Compnents of the Control Elements 8 Table 5: Pinout Intercontec 627 AEG A 384 MD 36 00 002K 600 10 Table 6: Pinout Binder 86 0632 1000 00004 10 Table 7: Pinout Binder 09 3732 90 04 11 Table 8: Mechanical Specifications 16 Table 9: Electromagnetic Compatibility Table 10: Environmental Conditions 16 16 Table 11: Display