Touch-it CE OEM glass 7 Operating Instructions Display and Touch Projected Capacitive Touch Easy Integration Ready For Use
Touch-it CE OEM GLASS 7 Operating Instructions Document No. Revision Date PA10003490 02 13 May. 20 Address Christ Electronic Systems GmbH Alpenstraße 34 DE-87700 Memmingen +49 (0)8331 8371 – 0 +49 (0)8331 8371 – 99 info@christ-es.de http://www.christ-es.de Telephone Fax E-Mail Internet Copyright No part of this documentation may in any form be reproduced, copied or distributed by means of electronic systems without previous written permission by Christ Electronic Systems GmbH.
Touch-it CE OEM GLASS 7 Operating Instructions Table of Contents Page 1 1.1 1.2 1.3 1.4 2 2.1 2.2 2.3 3 3.1 3.2 3.3 4 4.1 4.1.1 4.2 4.3 General ..............................................................................................................................................3 Used Symbols .......................................................................................................................................... 3 General Pointers ..................................................
Touch-it CE OEM GLASS 7 Operating Instructions General 1 1.1 Used Symbols Symbol The following symbols are used in this instruction manual: DANGER! Denotes a direct threat of danger. Not observing this pointer may be life threatening or lead to serious injuries. CAUTION! Denotes a possibly dangerous situation. Not observing this pointer can cause minor injuries or lead to material damages. INFORMATION! Denotes application pointers and other useful information. 1.
Touch-it CE OEM GLASS 7 Operating Instructions If the device is used for other purposes or incorrectly operated, Christ Electronic Systems GmbH will not hold damages liable. Do not operate the touch-sensitive surface of the screen with any abrasive or sharp-edged objects. Protect the Touch-it Panel PC against caustic chemicals and long solar radiation. Never cover the Touch-it Panel PC completely or build it in a small closed and unvented housing. This is a Class A product.
Touch-it CE OEM GLASS 7 Operating Instructions 1.4 Explosion Protection and Certification INFORMATION The device is certificated of ATEX and IECEx. The device is also certificated for operation in the US and Canada and comply with FCC regulations. The certification is available on request. Type label: International Certification: USA: FCC (Federal Communications Commission) The device complies with Part 15 of the FCC Rules.
Touch-it CE OEM GLASS 7 Operating Instructions Copyright / © Christ Electronic Systems GmbH a member of the Christ Company Group 6 / 13 Feb. 2020, Revision 02 Document No.
Touch-it CE OEM GLASS 7 Operating Instructions 2 2.1 Technical Data System CPU Graphic NXP i.MX6DL, DualCore 1 GHz 3D Vivante GC880 2D Vivante GC320 H.264, MPEG-4/XviD, MPEG-2, H.263 Video Decoder Memory Storage 1 GB DDR3 RAM 4 GB NAND FLASH Internal: MicroSD (up to 32GB) RTC Lithium Battery (optional) Linux Embedded CMOS Battery Operating System 2.2 Power Supply PoE (IEEE 802.3af): 48Vdc Supply Voltage Power Consumption Power Switch 2.
Touch-it CE OEM GLASS 7 Operating Instructions 3 Commissioning 3.1 Technical Drawing The Touch-it CE OEM glass 7 is designed for customer specific mounting. Copyright / © Christ Electronic Systems GmbH a member of the Christ Company Group 8 / 13 Feb. 2020, Revision 02 Document No.
Touch-it CE OEM GLASS 7 Operating Instructions 3.2 Mounting Mounting of the device on the support arm with four countersunk screws. Screw 3.3 4 x countersunk screw DIN EN ISO 14581; M3 x 8 Interface LAN 1 x 100Mbit Ethernet with PoE (IEEE 802.
Touch-it CE OEM GLASS 7 Operating Instructions 4 Software The highly customized software consists of: Bootloader: Das U-Boot Linux (poky/ces-fb based) Kiosk browser based on chromium The system is configured to load a pre-set webpage and offer no additional method of configuration and does not allow any other use for the operator. The system admin can configure the system via ssh. 4.1 Accessing the System 4.1.
Touch-it CE OEM GLASS 7 Operating Instructions Example: sudo nmap –sP 10.15.15.0/24 This scans from IP address 10.15.15.0 to 10.15.15.255 4.2 Rebuilding the Image Our source repositories and short instructions on how to rebuild the image can be found on: https://github.com/software-celo/ces-bsp-platform. 4.3 Recover the Delivery State To recover the delivery state of the image you can follow the instructions found in the CURT User Guide https://christelectronicsystems.box.
Touch-it CE OEM GLASS 7 Operating Instructions DISCLAIMER Technical data are subject to modification and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner. Copyright / © Christ Electronic Systems GmbH a member of the Christ Company Group 12 / 13 Feb.