Chord Electronics Product Communication | English The Pumphouse, Farleigh Lane, East Farleigh, Kent, ME16 9NB. Great Britain. +44 (0) 1622 721 444 info@chordelectronics.co.uk chordelectronics.co.uk 2yu Manual - V.
Chord Electronics 2yu | User manual 1 Content 2 Introduction 3 3 Registering 2yu 4 4 Product description 5 5 Connecting 2yu to 2go 6 6 Connecting 2yu to an audio system 7 7 Powering on 2yu 8 8 Selecting an output 8 9 Mute 9 10 Dimmer function 10 11 Set-up 10 12 Technical specifications 2 11
Chord Electronics 2yu | User manual 2 Introduction This user manual is intended for 2yu users. It contains all the information necessary to safely and successfully use 2yu. The user manual describes 2yu and provides the essential user instructions related to everyday use. 2.1 Safety Please take note of the following safety instructions before using 2yu: • Never allow 2yu to come into contact with water or other liquids. • Never spray cleaner onto 2yu.
Chord Electronics 2yu | User manual 3 Registering 2yu 2yu comes with a three-year warranty that covers defects in materials and workmanship through fair wear and tear. • Register your 2yu via the Chord Electronics website: www.chordelectronics.co.uk/register-product • Registering your product helps us to provide you with the best possible after-sales support. In the unlikely event of a claim, you must first contact your supplying dealer.
Chord Electronics 2yu | User manual 4 Product description 2yu is a digital interface that connects with 2go to create a network bridge for use with a DAC, DACequipped device or the Hugo M Scaler. 4.
Chord Electronics 2yu | User manual 5 Connecting 2yu to 2go To connect 2yu to 2go: 1. Before operating 2yu with 2go, the devices must be docked. Failure to correctly dock the devices may cause damage. Using the locking pins supplied with the 2go (pins are not supplied with 2yu), screw the pin into 2yu’s screw-thread until thumb-tight and repeat with the second pin. 2. Ensure the locking hex bolts on either side of 2go are loose and not obstructing the connector holes.
Chord Electronics 2yu | User manual 6 Connecting 2yu to an audio system 2yu features an array of digital outputs including: USB Type-A; BNC coax; RCA coax and optical. Using a high-quality cable, connect 2yu’s digital output/s to the corresponding digital input/s on the chosen partnering equipment (DAC, DAC-equipped device or the Hugo M Scaler). All outputs can be connected, however, only the output selected will be active.
Chord Electronics 2yu | User manual PCM: Playback rate USB Type A Optical BNC/RCA coax 44.1 kHz 44.1 kHz 44.1 kHz 44.1 kHz 48 kHz 48 kHz 48 kHz 48 kHz 88.2 kHz 88.2 kHz 88.2 kHz 88.2 kHz 96 kHz 96 kHz 96 kHz 96 kHz 176.4 kHz 176.4 kHz 176.4 kHz 176.4 kHz 192 kHz 192 kHz 192 kHz 192 kHz 352.8 kHz 352.8 kHz DS 176.4 kHz * 352.8 kHz 384 kHz 384 kHz DS 192 kHz * 384 kHz 705.6 kHz 705.
Chord Electronics 2yu | User manual 7 Powering on 2yu 2yu does not have its own internal battery and requires continuous power, which must be supplied at all times, from 2go. Connect the included 5 V 2 A Micro USB adapter to a wall outlet and insert the Micro USB cable into 2go. A green power LED should be displayed; a red power LED indicates 2yu is off. Do not use any third-party power supplies as they may damage the product and will void the warranty. Press the power button once to power up both devices.
Chord Electronics 2yu | User manual 8 Selecting an output With 2go and 2yu switched on, select an output using the OUTPUT button: press repeatedly to scroll between USB or optical/RCA/BNC (which are simultaneously active). Before proceeding, please choose which output you will be using with your connected DAC. If using the USB output, ensure you have connected your DAC and powered it on before proceeding with the set-up.
Chord Electronics 2yu | User manual 10 Dimmer function 2yu features dimmable buttons with four levels, adjustable via the DIM button. Button colour 2yu status Off Low Medium High Full 11 Set-up Before using 2yu, refer to our website to ensure that you have the latest update for the 2go firmware and Gofigure software. You will be able to find this on our product page for either the 2yu or 2go. 2go must be on at least V 1.5.0 firmware and Gofigure for iOS V2.08(22) or Gofigure for Android v1.2.
Chord Electronics 2yu | User manual 12 Technical specifications Dimensions with 2go 115 mm x 100 mm x 22 mm Weight 2yu 206 g Weight 2go + 2yu 362 g Inputs 2 x Mirco USB for 2go only Input power Micro USB 5 V 2 A (required via 2go) Outputs USB Type-A (44.1 kHz-768 kHz / DSD 256) BNC coax (44.1 kHz-384 kHz /DSD 64) RCA coax (44.1 kHz-384 kHz /DSD 64) Optical (44.
