User's Guide

User Guide

1.This product is a wireless remote control used for switch locking and

unlocking. There are two keys for operation, K1 for locking and K2 for

unlocking.Simply press K1, and the red light flashes as lock，Single press K2,

the red light flashes to unlock

2.The power supply is DC 6V powered by button battery

3.The operating frequency is 433.92 MHz

4.The standby current of the product is 0.2uA，

5.Operating current: 4mA

6.Encoding method: learning code

7.Transmission distance: >50m(barrier-free)

8. Modulation mode: ASK

9. Operating temperature: -10℃~+70℃

10. Size: 54×34×15mm

PAGE 1
User Guide 1.This product is a wireless remote control used for switch locking and unlocking. There are two keys for operation, K1 for locking and K2 for unlocking.Simply press K1, and the red light flashes as lock，Single press K2, the red light flashes to unlock 2.The power supply is DC 6V powered by button battery 3.The operating frequency is 433.92 MHz 4.The standby current of the product is 0.2uA， 5.Operating current: 4mA 6.Encoding method: learning code 7.Transmission distance: >50m(barrier-free) 8.
PAGE 2
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.