Lihua_BLE_002 Hardware specification Chongqing Lihua Automation Technology Co., Ltd LiHua_BLE_002 Bluetooth module hardware specification V1.
Chongqing Lihua Automation Technology Co., Ltd Lihua_BLE_002 Hardware specification Catalogue 1. Revision record ...................................................................................................................... 1 2. Bluetooth module parameters .............................................................................................. 2 3. Bluetooth module pin definition and module schematic diagram ....................................... 3 3.1 Bluetooth module pin definition ......
Chongqing Lihua Automation Technology Co., Ltd Lihua_BLE_002 Hardware specification WARNINGS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Chongqing Lihua Automation Technology Co., Ltd Lihua_BLE_002 Hardware specification The requirement for KDB 996369 D03: 1 List of applicable FCC rules FCC Part 15. 247. 2 Summarize the specific operational use conditions None 3 Limited module procedures The module is a single module, so this requirement is not applicable to the product. 4 Trace antenna designs The module uses the permanent external antenna, so this requirement is not applicable to the product.
Chongqing Lihua Automation Technology Co., Ltd Lihua_BLE_002 Hardware specification For Both FCC & IC application: This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Chongqing Lihua Automation Technology Co., Ltd Lihua_BLE_002 Hardware specification y être exposée à une distance de moin de 20 cm. Installer les antennes de facon à ce que le personnel ne puisse approcher à 20 cm ou moins de la position centrale de l’ antenne. La FCC des éltats-unis stipule que cet appareil doit être en tout temps éloigné d’au moins 20 cm des personnes pendant son functionnement.
Lihua_BLE_002 Hardware specification Chongqing Lihua Automation Technology Co., Ltd 1. revision record edition Revised content Revised by / date V1.0 First edition YangPeng/2022-3-10 V1.1 Adjust format YangPeng /2022-3-19 1.Adjust Bluetooth chip packaging V1.2 and Bluetooth schematic diagram 2.
Lihua_BLE_002 Hardware specification Chongqing Lihua Automation Technology Co., Ltd 2. Bluetooth module parameters Category Wireless Hardware parameter explain Bluetooth version BLE 5.0 Operating frequency band 2402MHz ～ 2480MHz Maximum transmit power +10 dBm（Normal 10 dBm output） Receiving sensitivity -94dBm (1M) authentication FCC/CE/ICES Module Size 23.0mmX15.
Lihua_BLE_002 Hardware specification Chongqing Lihua Automation Technology Co., Ltd 3. Bluetooth module pin definition and module schematic diagram 3.
Lihua_BLE_002 Hardware specification Chongqing Lihua Automation Technology Co., Ltd 3.2 Schematic diagram of Bluetooth module 4. Bluetooth module size 5. Bluetooth module electrical parameters Serial number condition value 1 working voltage 2.5~4.3V(typical 3.3V) 2 I/O Voltage 1.6~3.3V(typical 2.
Lihua_BLE_002 Hardware specification Chongqing Lihua Automation Technology Co., Ltd 4 working temperature -20~+105℃ 5 Storage temperature -40~125℃ 6. Bluetooth module power consumption Operating mode average value Maximum Company TX peek current (0dB) -- 8 mA RX peek current -- 9.7 mA uA Deep sleep current (include 48K retention RAM) 6.1 -- Power off 2.7 -- uA 7.
Lihua_BLE_002 Hardware specification Chongqing Lihua Automation Technology Co.
