Chongqing Jinou Science &Technology Development Co., Ltd. Chongqing Jinou Science &Technology Development Co., Ltd. Ver7.6_20120413 http://www.oemblue.com/ info@oemblue.
Chongqing Jinou Science &Technology Development Co., Ltd. CONTENTS 1. Brief Introduction .......................................................................................................................... 3 2. Technical Specifications ................................................................................................................ 5 4. Description of indicator and press-button ..................................................................................... 6 5.
Chongqing Jinou Science &Technology Development Co., Ltd . 12.3 MAJOR DEVICE CLASSES .......................................................................................... 26 12.4 THE MINOR DEVICE CLASS FIELD .......................................................................... 26 12.5 MINOR DEVICE CLASS FIELD - COMPUTER MAJOR CLASS ............................. 26 12.6 MINOR DEVICE CLASS FIELD - PHONE MAJOR CLASS ...................................... 27 12.
Chongqing Jinou Science &Technology Development Co., Ltd . Figure 1 shows that in the application of user devices A and B is a serial cable. Figure 2 shows that in the application of the user devices A and B are Bluetooth RS232 adapter, and between the two devices, it is the same to users devices and regarded as a serial line. Figure 3 shows the connection of Bluetooth RS232 adapter and other Bluetooth devices (here is the connection situation of the Bluetooth PDA).
Chongqing Jinou Science &Technology Development Co., Ltd . 2. Technical Specifications Standard and Model No. Specification RF output power Operating Frequency Bluetooth Serial Adapter Class 2 (female) Standard BTS4004C2P Model No. Compatible Bluetooth 3.0 Specification 10M CLASS 2 Standard ISM Frequency 2.400～2.483GHz Spectrum extensions FHSS Antenna Sensitivity Protocol Support services Maximum connection number Onboard antenna <-88dBm at < 0.
Chongqing Jinou Science &Technology Development Co., Ltd.. Storage Temperature Humidity Size -40℃ ～ +85℃ 5％～90％ no condensation 99(L)×34(W)×17(H) mm 3. Power Consumption Mode Working No connecti on Test Condition (Slave Device) Maximum mA Typical Value mA Minimum mA Sniff Open(No data transmission) 15.9 11.2 10.9 Sniff close or data transmission 26.9 22.5 21.1 Connect (Inquiry) interval=2048 Connect (Inquiry) continue=18 21.4 11.2 10.
Chongqing Jinou Science &Technology Development Co., Ltd . blinks once every 3 seconds when query. When matching, it blinks quickly four times every second; when connecting, blink once every second; after connecting, the indicator light extinguishes. When RS232 is working under the parameter setting condition, the master/slave indicator light and connecting state indicator light extinguish.
Chongqing Jinou Science &Technology Development Co., Ltd Needle Pattern (Male) DB9 Pin No 1 2 3 4 5 6 7 8 9 Signal VCC TXD RXD Nc GND Nc CTS RTS VCC Pin No 1 2 3 4 5 6 7 8 9 Signal VCC RXD TXD Nc GND Nc RTS CTS VCC 6. Description of Power Supply Condition There are two ways of power supply. The power socket of adapter can provide power and when connect on PC we can use this way. The power adapter specification of RS232 adapter is 6VDC, 500mA rated current. The second way is using DB9 seat to supply.
Chongqing Jinou Science &Technology Development Co., Ltd. http://www.oemblue.com/ info@oemblue.
Chongqing Jinou Science &Technology Development Co., Ltd. Notes: VCC/Nc says when use power sockets power-up, power-up, 1 and 9 pin connect VCC power supply. 1 and 9 pin is Nc. Using DB9 8. Instructions After powering on, the power indicator light of the device should bright immediately and the other indicator light is blinking separately. After the factory, the default settings for the device are generally 9600bps , 8-N-1 communication mode and with flow control.
Chongqing Jinou Science &Technology Development Co., Ltd . Notes: The parameter is saving in Bluetooth. Therefore, even blackout, the parameter will keep the same number as the last time and will not lose. After modifying the parameter, please press the switch button again to make RS232 adapter enter into data model. Starting under the data state, if the master device do not memorize address, it will firstly search the nearby Bluetooth device.
Chongqing Jinou Science &Technology Development Co., Ltd . 9. Configuration Tools Notes: When using configuration tools, firstly please press Cmd button to make serial adapter enter into parameter setting mode, make sure the baseboard connect on PC port correctly and make sure the port not be occupied by other software. After setting the parameter, please press Cmd button again to make RS232 adapter enter into data mode and make the modified parameter effective. Make the V4.
Chongqing Jinou Science &Technology Development Co., Ltd. 9.1 Boot screen Open SetParam_en.exe file, enter the start screen, and set the communication parameters of the serial adapter and the computer serial port Port name Select a port name of the computer and the serial adapter, such as COM1, COM2 Data flow control Select flow control way 9.2 Basic Settings Device name Set the serial adapter’s name, and it only supports English name (not exceed 16 characters).
Chongqing Jinou Science &Technology Development Co., Ltd. made from a device, which can be used as an alternative to RS232 cable. Bind address Whether you have bound the address of the other or not. Ticking(打钩) means that it can not connect with other devices after this matching & connection, but only limit the connection of this device . On the contrary, it is allowed to connect and match with any other devices.
Chongqing Jinou Science &Technology Development Co., Ltd . Connection lasts The duration of each time you connect and scan, that is the time you remain the connection state. Duration = setting value × 625us Note: The duration of connection can not be longer than the interval. Inquiry Interval The interval of each time you Inquire and scan, that is how often to allow queries.
Chongqing Jinou Science &Technology Development Co., Ltd . the serial adapter can be used regularly. Note: Do not set the parameters often, or it will damage the chip. Description: This RS232 serial adapter can be customized according to user requirements 10. AT command Do not use "Configuration Tools" and the parameters of the RS232 adapter can also be Inquired / changed when send the AT command with serial port directly.
Chongqing Jinou Science &Technology Development Co., Ltd . it>, \r\n 0: 1 stop bit 1: 2 stop bits paritybit 0: No parity 1: Odd parity 2: Even Parity Default: 0, 0 4. Set / Inquire authentication password Command Response AT+PASSWORD=\r\n \r\n OK\r\n AT+PASSWORD?\r\n \r\n OK\r\n \r\n+PASSWORD: \r\n Parameter password: Default: 1234 (No more than 6 bytes) 5. Set/Inquire Name Command AT+NAME=\r\n Response \r\n OK\r\n AT+NAME?\r\n \r\n OK\r\n \r\n＋NAME:
Chongqing Jinou Science &Technology Development Co., Ltd . 7. Set / Inquire the parameters of inquiring scan and connecting scan Command Response AT+SCANTIME=, , , \r\n AT+SCANTIME?\r\n Parameter pageint: Connection interval pagewin: Duration of connection inqint: Inquire interval inqwin: Inquire duration Default: 2048, 18, 2048, 18(Decimal) \r\n OK\r\n \r\n+SCANTIME: , , , \r\n : Connect scan interval(Range: 18～409
Chongqing Jinou Science &Technology Development Co., Ltd . AT+ROLE=\r\n \r\n OK\r\n AT+ROLE?\r\n \r\n OK\r\n \r\n＋ROLE: \r\n master: (0~7) 0 stands for slave device. Others: the device number of automatically connection Default: slave device 11. Set / Inquire the data processing mode when not connected command AT+DATAMODE= \r\n AT+DATAMODE?\r\n response \r\n OK\r\n parameter : 0: The data is stored in the \r\n OK\r\n buffer until the connection is \r\n ＋ DATAMODE: establ
Chongqing Jinou Science &Technology Development Co., Ltd . 14. Set / Inquire whether it is bind command AT+BIND=\r\n response \r\n OK\r\n AT+BIND?\r\n \r\n OK\r\n \r\n＋BIND: \r\n parameter enable: 0 doesn’t bind the address or the address has been bound.
Chongqing Jinou Science &Technology Development Co., Ltd. AT+LADDR?\r\n \r\n OK\r\n addr: the local Bluetooth \r\n＋LADDR: \r\n address Notes: When using address setting command, the format must be the same as the inquired local or remote Bluetooth address. 18. Inquire software version Command AT+VERSION?\r\n Response \r\n OK\r\n \r\n＋VERSION: \r\n Parameter Para1: software version 19. Software reset Command Response Parameter AT+RESTART\r\n \r\n OK\r\n After sending this command, the seri
Chongqing Jinou Science &Technology Development Co., Ltd . 23. Inquire all commands ATZ?\r\n Command Response \r\n OK\r\n Show all commands Parameter List all the commands 11. FAQ: 1 After powering the module, the indicator of the Module doesn’t blink. Check whether the power supply is correct. The correct power is positive inside and negative outside, from 6V. And the power is 100mA. If the power is supplied by DB9, the user needs to connect 1 or 9 pin to VCC and 5 pin to GND.
Chongqing Jinou Science &Technology Development Co., Ltd . 4 How the multipoint connections send and receive data? And what are the differences between the sending & receiving of multipoint and point-to -point connections? The point to point sending and receiving data has no distinction of master device and slave device. But the multipoint connection has the distinction of master device and slave device.
Chongqing Jinou Science &Technology Development Co., Ltd . 7 Two serial adapter can not connect with each other Use Configuration Tools to inquiry and confirm whether one of the 2 modules is a Master device, the other one is a Slave device; whether the passwords and Category Codes of the two modules are the same, and if they are not, you should use the Configuration Tools to modify them into a same value. Whether the master device has memorize other module’s address. If it is, please remove it.
Chongqing Jinou Science &Technology Development Co., Ltd . 10 How to communicate with PDA? Firstly you need to set parameter of PDA and adapter and to make sure it must be the mode of one master and one slave. What need to be paid attention is the port setting of PDA.
Chongqing Jinou Science &Technology Development Co., Ltd. to 0. Any reserved but otherwise unassigned bits, such as in the Major Service Class field, should be set Figure 1.2: The Class of Device/Service field (first format type). Please note the order in which the octets are sent on the air and stored in memory. Bit number 0 is sent first on the air. 12.
Chongqing Jinou Science &Technology Development Co., Ltd . Minor Device Class 7 6 5 4 3 2 bit no of CoD 0 0 0 0 0 0 Uncategorized, code for device not assigned 0 0 0 0 0 1 Desktop workstation 0 0 0 0 1 0 Server-class computer 0 0 0 0 1 1 Laptop 0 0 0 1 0 0 Handheld PC/PDA (clam shell) 0 0 0 1 0 1 Palm sized PC/PDA 0 0 0 1 1 0 Wearable computer (Watch sized) X X X X X X All other values reserved TABLE 1.4: SUB DEVICE CLASS FIELD FOR THE 'COMPUTER' MAJOR CLASS 12.
Chongqing Jinou Science &Technology Development Co., Ltd . Minor Device Class 4 3 2 bit no of CoD 0 0 0 Uncategorized (use this value if no other apply) X X X All other values reserved TABLE 1.7: RESERVED SUB-FIELD FOR THE LAN/NETWORK ACCESS POINT 12.
Chongqing Jinou Science &Technology Development Co., Ltd. 0 0 0 1 Joystick 0 0 1 0 Gamepad 0 0 1 1 Remote control 0 1 0 0 Sensing device 0 1 0 1 Digitizer tablet X X X X All other values reserved TABLE 1.10: RESERVED SUB-FIELD FOR THE DEVICE TYPE 12.10 MINOR DEVICE CLASS FIELD - IMAGING MAJOR CLASS Minor Device Class 7 6 5 4 bit no of CoD X X X 1 Display X X 1 X Camera X 1 X X Scanner 1 X X X Printer X X X X All other values reserved TABLE 1.
Chongqing Jinou Science &Technology Development Co., Ltd . This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. §15.19 Labelling requirements. This device complies with part 15 of the FCC Rules.
Manufacturers： Chongqing Jinou Science & Technology Development Co., Ltd. Add: D1-802, Overseas Students Pioneer Park No.71 Kecheng Rd, Jiulongpo District ,Chongqing, China Telephone: 86-23-86501296 Email: market@jinoux.com Web: www.oemblue.
