User's Manual
User Manual
SMARTPHONE
Camera Shutter
XSC100
made in KOREA
www.X-pointer.com
※ Available with iPhone 4S or later
2) For iPhone (iOS7, iOS8)
① Select the Bluetooth section on the conguration screen and
turn the Bluetooth on. (Activate the Bluetooth)
② Xele is automatically searched on the Bluetooth conguration
screen.
③ Push the Xele button to set up the connection standby and
the indicator LED blinks with a certain period (about 15 seconds).
④ The searched Xele appears on the smartphone Bluetooth
device list. [Ex) Xele 48, Xele 54, etc.]
Use the 2 digits following 'Xele' to identify your own device.
⑤ Select your searched Xele, you can see pop-up for pairing.
Please select ‘pair’ on the pop-up screen.
⑥ The indicator LED of Xele blinks every 5 seconds for the
normal connection.
⑦ Now, run camera App and take shot.
※ For Android, it depends on model and OS version.
Please check compatible devices before use.
Xele is available with Android OS 4.3 and OS 4.4.2.
It doesn’t working although there is your model in compatible
device list, please update OS. For more detail about update, please
contact customer service center of Smartphone manufacturer.
3) For Android (OS 4.4.2)
(If your Android OS version is 4.3, please go to “4)” section.)
① Select the Bluetooth section on the conguration screen and
turn the Bluetooth on. (Activate the Bluetooth)
② Push the Xele button to set up the connection standby
and the indicator LED blinks with a certain period (about 15
seconds).
③ Select 'Search' or 'Search other device' below the
smartphone. (If there is no registered Bluetooth devices,
it searched automatically.)
④ The searched Xele appears on the smartphone Bluetooth
device list. [Ex) Xele 48, Xele 54, etc.] Use the 2 digits
following 'Xele' to identify your own device.
▶ Status Indicator on Xele
※ LED doesn’t work with button : Battery problem or failure.
※ For more detail about trouble shootings, please check on
website (www.choistec.com/en/xele/faq)
4. How to change the battery
One battery is provided. Replace the battery when the inserted
one is fully discharged for smooth operation.
1) Prepare one battery (CR2025).
2) Detach the battery cover of Xele.
3) Remove the existing battery from the battery cover and replace
with new one.
4) Put back the battery cover of Xele.
5) It shows that the battery is normally replaced if the indicator LED
blinks with a certain period (about 15 seconds) when you
push the Xele button.
(The indicator LED blinks once in every 5 seconds if Xele is
connected to the smartphone)
6) Check the battery insert status if the indicator LED does not blink
with a certain period.
Connection
standby with
the smartphone
The indicator LED blinks for
every 0.5 second
(about 15 seconds)
The indicator LED blinks for
every 5 seconds.
Connected with
the smartphone
5. Caution
1) Do not apply excessive pressure, use the product out of the
purpose and arbitrarily modify the product.
2) Take care for an infant and a child not to eat the product and
keep the detached battery out of reach of children.
3) Dispose of the replaced battery following the instruction.
4) Do not make the water contact the water or wet.
5) Follow the temperature of -10 ~ +50˚C for the product storage
and use.
6) Take care not to lose your product.
6. Specication
7. Certication
• Separately marked on the box
FCC ID : RVBXSC100
Model name : XSC100
Choistechnology Co., LTD.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions :
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including
interference that may cause undesired operation.
INFORMATION TO THE USER
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to
correct the interference at his own expense.
WARNING
Changes or modications not expressly approved by the
manufacturer could void the user’s authority to operate the
equipment.
8. Customer Support
We will kindly help you in case you have problems or there is
something to improve on the product or its use. Please refer to our
contact information as below.
E-mail : inquiry@choistec.com
Homepage : www.X-pointer.com
9. Warranty
One year warranty.
If you have problem, please contact store you bought.
1. Product Conguration
2. Designation of Part
※ Caution : The components and functions of the product may vary
without notication to upgrade the performance.
3. Compatible devices
1) Please check compatible
device list.
Check website
(www.choistec.com/en/xele/faq)
Scan the QR code
(http://m.site.naver.com/0alxz) to check the compatible devices.
Components
Qty.
Xele
1
1
1
1
1
Silicon Case
Battery (Button Cell CR2025)
Strap
User Manual
No.
Designation
①
Status Indicator (LED)
②
Button (Pairing and Shot)
③
Battery Cover
①
②
③
⑤ Select your searched Xele to automatically register and
connect the device.
⑥ The indicator LED of Xele blinks every 5 seconds for the
normal connection.
⑦ Now, run camera App and take shot.
4) For Android OS 4.3
① Search for 'XSC100' in “Google Play ”and install the
exclusive APP (Xele) on the smartphone.
② Run the exclusive App (Xele) for pop-up Bluetooth activation
screen. Click "Yes" for activation.
③ Push the Xele button to set up the connection standby and
the indicator LED blinks with a certain period (about 15 seconds).
④ The searched Xele appears on the smartphone Bluetooth
device list. [Ex) Xele 48, Xele 54, etc.] Use the 2 digits
following 'Xele' to identify your own device.
⑤ Select your searched Xele to automatically register and
connect the device. And then turn to shooting mode
automatically.
⑥ The indicator LED of Xele blinks every 5 seconds for the
normal connection.
⑦ Now, take shot with Xele App.
※ Notice (Galaxy S4, Note3) If camera zoom is activated
when you push Xele button, please change your volume key
setting on camera App. (some devices volume key is set as ‘The
zoom key’. Please change to ‘The Camera Key’)
Operating Range
Max 20m (Open)
CR2025 (DC 3V) Battery
RF Protocol
Current
Bluetooth 4.0 LE
Less then 10mA
3.5g Weight
Ø30 x 8.2mm Size
Temp. -10~50℃
Humi. 30~75%
Frequency Range
2,402~2,480MHz
Frequency Channel
40CH
RF Power
Max 1mW
Operation
Temp. -10~50℃
Humi. 75% less
Modulation
GFSK Storage