XPR200 User Manual v1.2 (Bluetooth4.0 BLE USB Dongle) ChoisTechnology Co., Ltd.
1. Product Features ※ In order to use this product, smart device has to support the latest Bluetooth 4.0 BLE. X-pointer SMART(XPR200) is wireless PC remote control which we are able to use with smart phone supported Bluetooth 4.0. If you use the product with X-pointer Mobile(XPS130, XPS200), it can be used as wireless laser presenter. X-pointer SMART supports Plug and play.(It is available without installing program.
2. Product Composition No.
3. Product Instructions First, download X-pointer app(X-pointer SMART) from APP store. (You could search for app as keyword “X-pointer”) ※ App will be supported in Play store later. 1. Insert X-pointer SMART(XPR200) into USB port of PC. 2. LED in dongle lights up after X-pointer SMART is recognized in PC. 3. Turn on Bluetooth from set-up of smart equipment. 4. Practice X-pointer app. 5. Achieve equipment registration once you finish the user’s process. 6.
4. Cautions Accidents caused by user negligence is not covered by warranty. Please note the below contents. 1) Do not apply excessive shock, reorganize at your option or use the device for purpose other than its intended use. 2) Do not expose the device for a long time in direct rays of the sun caused discoloration. 3) Be careful so that liquid such as water, beverage does not enter the device. 4) Keep the device stored between -10~50°C, operating temperature is 10~40°C.
5. Product Specifications Division Contents CLASS Bluetooth 4.0 BLE USB HID dongle Wireless use distance(m) Wireless transmission device Max 30 m (Open Field) Bluetooth 4.0 BLE Frequency 2,402~2,480Mhz Channels 40CH Output Power less than 4mW Modulation Interface (PC) GFSK USB 1.1/2.
6-1. Certification The product received certification in accordance with Korea Communications Commission, KCC Regulation. “This wireless equipment does not service relative to life security since it has possibility for electric wave confusion.“ 1) Product name(Model no.) – X-pointer SMART (XPR200) 2) Certification no. FCC ID : RVBXPR200 3) Company name : Chois Technology Co., Ltd. 4) Manufacturer / Country of origin : Chois Technology Co., Ltd.
6-2. Certification This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
7. Customer Support We will kindly help you in case you have problems or there is something to improve on the product or its use. Please refer to our contact information as below. E-mail : inquiry@choistec.com Homepage : www.X-pointer.
8. Warranty Product name Serial number Purchasing office Contact number Address Model number Purchase date Customer name E-mail (※ After you buy the product, please register a member and product in www.choistec.com.
RF Exposure Statement (2.1091) : FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be colocated or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 0 centimeter between the radiator and your body.