ON Type:of Equipment Frequency Range Channel Rated RF-Output Power RF range RF Data Rate RF Type Modulation: Method Communication System ID Code Laser 0/8 Compatible Interface USB Memory Buttons, Battery Bizet-of Transmitter Size of Receiver Battery Installation 2 GHz bad low-power data communication system 2430MHz ~ 2460MHz 3 2.mw Max 30m 250 Bps Tilt: Sean GEEK Simplex 65536 Class Il Windows, SE, Me, 2000, XP, MAC OSX USB 1, Optional 256MB to 512MB 3 ABA TEA 97.6 mm 356mm X 18.3mm 56.3mm 3 22mm X 8.
ICK INSTALL GUIDE 1. Insert the Receiver into the USB Port of the PC and then wait the device management for a Tew second. (Insert batteries and check the working of the laser beam of the transmitter} 2. The X-pointer will be installed automatically by displaying the Blink of LED and will work immediately after it is inserted into the USB Port. 3.
3) When driver install program appears, select the option of "Install" and click OK to install Windows 98 Driver. 4) Insert the X-pointer II Receiver into the USB port of your computer. 5) The "Add New Hardware Wizard" will appear and dick "next" after detecting the "X-pointer USB Mass Storage”. 6) Select the option of "Search for the best driver for your device" and click "next". 7) DE-select all check boxes and select the “Specify a location” checkbox, and click "Browse".
of the X-pointer The Transmitter functions as all in one-controller -.a remote controller, and a laser pointer. The receiver consists of a USB Plug, LED Lager Beam Paige Up < ® Page Down Black Screen > Slide show Start/End Inexpert Laser Button Quoins Transmitter © 97.6 mm X 356mm X 16.3min fo USE Plug oo Lo LED Pointer Presenter Flash Memory Receiver ; 68. 3mm. X. 22mm X 8.
CAUTION Use of controls or adjustment or performance of procedures other than those specified herein may result in hazardous radiation exposure 1. Model Name Transmitter : X-pointer Premium XP140T Receiver & X-pointer Premium XP140R; XP140R256, XP140R512 2. CERTIFICATION Transmitter + WCT=XP140T Receiver | W CT-XP140R FC FLACCID : RVBXP140T C€ 0678 This device -corries with part 15 of the FCC Rules. Operation is subject to.
This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection. against harmful interference in a residential installation. This equipment generates; uses and can radiate radio frequency energy and; if not installed and used in accordance with the instructions; may cause harmful interference to radio communications.
ed Questions 1. What is the receiving rigger of the X-pointer? = The maximum range is the exception of interfering obstacles, such as large metal objects, which can block RF signals. 2. Can the X-pointer be used only Ms Power point? = No; the X-pointer could be recognized as a general keyboard and mouse, so it could be used for all the software: 3. How often the battery should. be replaced? ~The battery depends.on the frequent use of a laser, remote controller consumes less power than using a laser.
For CE Marking Declaration of conformity We, Chris Technology Of 1102, Inchon IT Tower, Donaldson Amen, Inchon KOREA declare under our sole responsibility that our product Chris Technology vape XP140T XP 140R XP 140R256, XP I40RS12 to which this declaration relates ig in conformity with the appropriate standards EN 300 440-1, FN 300 440-2, EN 301 489.