UNPACKING CHECKLIST Printer Installation Data cable Installation Guide
APPEARANCE COMPONENT Front view Left view Back view Top view
2 Error indicator 3 Pause button 4 Paper advance button BT 5 Power indicator ERROR 1 Bluetooth indicator 6 USB connector 7 Network port 9 Power switch 8 Power supply connector The interface shown above is for reference only as the interface may vary depending upon the customer’s choice
Rubber roller Paper compartment Paper tightener Printhead
3 CONSUMABLES INSTALLATION 1、Use thumb to press the cover release button and open the compartment cover.
2、Remove the label spindle and stopper and set the paper roll into the label spindle. 1 3 2 4 5 Load the paper roll set into the printer from top to bottom.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority tooperate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
4、Adjust the tightener on the right until the label paper is properly tightened. Tighten inward. 5、Close the compartment cover. Press down on the compartment cover. When printing receipts, remove the label spindle and stopper and load the paper following steps 4 to 5.
4 KEY FUNCTION Label mode Power switch Pause button Paper advance button Function description Switch to O X X Printer power-off Switch to I X X Press X Press X X X Printer power-on Pause/continue printing X Press Advance a piece of paper X Press and hold Switch label/bill mode Power switch Pause button Paper advance button Function description Switch to O X X Printer power-off Press Advance paper by 10 mm Switch to I Receipt mode Switch to I X Press X Printer power-on
5 DESCRIPTION OF INDICATOR LIGHTS Bluetooth indicator Error indicator Power indicator On constantly X X Off X X Off X On constantly X X X Blinking Indication X Bluetooth not connected X Printer ready Bluetooth connected X Top cover open X On constantly Printer power-on Blinking X Allow the overheated printhead to cool down Flashing X X Flashing Out of paper The indicator may vary depending upon the printer model.
6 SOFTWARE DOWNLOAD iOS / Android Scan the QR code below with a mobile phone to download“Clabel trade”. Please operate the software follwing the software guidance. Clabel trade Download label editing app "Clabel trade" from Google Play Store or Apple APP Store and install it. Window Visit https://ga.ctaiot.com/pc Download“Clabel trade”and driver.
7 NOTES Usage precautions (1) Install the printer on a stable surface. Do not place the printer in areas exposed to vibration or impact. (2) Do not use or store the printer in areas exposed to high temperatures, high humidity, or excessive dust. (3) Connect the power adapter to an appropriate grounding outlet. Avoid using the same outlet with large motors or other devices that may cause power supply voltage fluctuations. (4) No water or conductive substance (i.e., metal) is allowed into the printer.
Printer cleaning The printhead should be cleaned promptly if: (1) The print is not clear; (2) The vertical column of print is not clear; (3) A Grinding noise is heard while feeding the paper; Cleaning Steps: (1) Switch the printer power off, open the cover and remove any paper; (2) Allow the printhead to cool if it had just finished printing; (3) Using a soft cotton cloth dipped in absolute ethyl alcohol, gently wipe the dust and particles off the thermal printhead surface; (4) Only use the printer for p
CT 3 2 0 D Label Printer Quick Installation Guide Shenzhen Dudian Technology Co., Ltd. Room 1101, Building 3, COFCO Chuangzhi Factory Area, District 67, Xingdong Community, Xin'an Street, Bao'an District, Shenzhen.