CWFF202 Series User’s Manual (Only for Internal Reference) Revision 01 2013/07/30 Prepared By: Alex Cheng
Revision History Revision 01 Date Notes Owner 2013/ 07/ 30 Initial Release Alex Cheng
TABLE OF CONTENT 1. Install and start the application on your system …………………………………..4 2. Product specification ……………………………………………...………………6 3.
1. Install and start the application on your system (1) Please install the product Driver. (2) After installed the Driver, you will see the REALTEK USB Wireless LAN Utility on you system. (3) Plug in the WiFi dongle on your system. (4) Double click it to execute “REALTEK USB Wireless LAN Utility” (5) Select an available Access Point ,and then connect it.
(6) Check the network quality
2. Product specification Description Chipsip Solution is a small-sized, 802.11abgn USB that achieves a data rate up to 300Mbps. It is 6 times faster than the legacy 11abg but is good performance. Features This product supports Client mode. It is ideal for multi-purpose installation in Windows and, Linux environment to share wireless connection. By supporting 64/128-bits WEP, TKIP, WPA, WPA2 and WPS, helps to protect your data and privacy during transmission.
Specification Hardware Features: Standard Wireless LAN Antenna Interface Frequency Range Data Rate IEEE 802.11 a/b/g/n 2T2R mode ( 5GHz 1x1 and 2.4GHz 1x1 ) Print antenna on board ( 2 dBi ) USB slave port 802.11a 5.180~5240 GHz(babd1)、5.745~5825 GHz(babd4) 802.11b/g 2.4~2.484GHz 802.11n 2.4~2.484GHz and 5.180~5240 GHz(babd1)、5.745~5825 GHz(babd4) 802.11b: 1, 2, 5,5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.
Product Dimension and Drawing Product outline size: about 75.5 x 26.0 mm Mechanical Drawing: (unit: mm, tolerance: ±0.
3. FCC Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.