Use Instructions

ManualsBrandsChinabase Industrial ManualsElectronicsBluetooth cable Buderfly

Manual

Introduction

The Bluetooth headset uses low-radiation Bluetooth short-range wireless communication

technology. When using Bluetooth headsets, you can make and receive hands free calls at

will, whether you are traveling, exercising or taking advantage of leisure entertainment. You

can connect the headset to a compatible Bluetooth wireless technology such as cell phones

and other Bluetooth enabled devices.

Before using the headset, please read this manual carefully. You can also read the manual of

your mobile phone or other Bluetooth enabled device to understand how to use/important

safety and maintenance information.

With Bluetooth wireless technology, you can connect to compatible communication devices

without using cables. Bluetooth connection does not require keeping the mobile phone and

earphones facing each other, but the maximum distance between the two should not exceed

10 meters. The Bluetooth connection may experience interference from walls, large physical

obstacles or other electronic devices causing the connection distance to be shortened

This headset complies with Bluetooth V5.0+EDR specifications and supports V5.0 Bluetooth

headset mode and V5.0 Bluetooth hands-free mode

1. Charging

1) This product uses 110mA polymer batteries. It is recommended to charge for 2 hours

before using it for the first time;

2) The red light is on when charging, the blue light is on when fully charged, about 2 hours

(Don’t charge more than 3 hours to avoid overcharging);

3) This product cannot be used while charging;

4) The maximum input voltage of the product is 3.7VDC and 2A maximum current.

2. Pairing: (This product must be paired with the mobile phone/mobile device before use)

1) First confirm whether your device has Bluetooth function (check your mobile device’s

operation manual)

2) Press and hold the power button until the red/blue colleague flashes quickly and emits a

"power on" sound, about 5 seconds, and enters the pairing state. At this time, press the

power button twice to enter the Chinese and English language selection mode according to

your choice (Bluetooth The headset defaults to Chinese)

3) Use the Bluetooth function of the mobile phone to search for Bluetooth devices, you can

find “Newmine”, select the device to connect

4) When your Bluetooth device is turned on and there is no Bluetooth connection, it will

automatically shut down after it is set up (about 5 minutes)

3. Instructions for use:

1) Powering on: Press the power button for four (4) seconds or until hear you hear a

"power on" sound. When the red and blue lights flash quickly to enter the search device

Summary of content (5 pages)

PAGE 1
Manual Introduction The Bluetooth headset uses low-radiation Bluetooth short-range wireless communication technology. When using Bluetooth headsets, you can make and receive hands free calls at will, whether you are traveling, exercising or taking advantage of leisure entertainment. You can connect the headset to a compatible Bluetooth wireless technology such as cell phones and other Bluetooth enabled devices. Before using the headset, please read this manual carefully.
PAGE 2
type/device pairing connection is successful, the blue light flashes once continuously for about 5 seconds, and enters the standby working state. Note: If the paired device is not connected for 5 minutes, the headset will automatically shut down 2) Answering a call: After the earphone hears the prompt tone from the mobile device, press the function button once to answer the call, or press the answer button on the phone to answer the call.
PAGE 3
. If the headset cannot be turned on after charging for twenty minutes, let charge another 20 minutes. This should fully charge the headset assembly and allow normal function. 4. No prompt when charging If the headset battery is completely exhausted or is charged for the first time after a long period of non-use, there may be no charging prompt for the first few minutes. After a while, the red indicator light will light up to indicate the concept of charging. 5.
PAGE 4
2) Do not get the equipment wet with liquids, otherwise it will cause serious damage to the equipment. Damage caused by water entering the equipment will not be guaranteed by the manufacturer. 3) Do not place the device in an environment where the temperature is too low or too high (below 0℃ (32 )or above 45℃ (113 F); 4) Please avoid using the indicator light near the eyes of children or animals 5) Do not use this equipment when thunderstorms are present.
PAGE 5
- All accessories of the product are not covered by the warranty 6. When replacing the product within the warranty period, please be sure to bring the parts of the faulty device to the dealer’s location 7. The repair service and replacement during the warranty period will not be extended or restarted. 8. The above guarantee content is limited to the warranty period written on this warranty card and the services provided by the company's customer service center.