Assembly Instructions

1
2
3 4 5
6
7 8 9
2.Technical Parameter
1.“*” key: cancel key, return key, one key lock.
2.“#” key: confirm key, enter the system menu key.
3.“Settings” button: hold down for 10s to restore factory Settings.
4. indoor one-button open and close button: short press can complete
automatic open and close action.
5. Door magnetic automatic locking: when the door magnetic is close to the
magnet for 1 second, the door lock will be locked automatically.
Electronic Door Key:
Password/fingerprint/remote dynamic password;
Remote Dynamic Cipher：
Under the home page of the device, swipe left to enter the remote dynamic password,
and click to obtain a set of 8-digit dynamic password. Dynamic password，The lock can
be unlocked in 5 minutes.
Battery Power Detection:
When the electric voltage is less than 4.8V, it can be identified normally. Each time the user
succeeds in verification, the message“The electric power is low, please charge in time”
will be displayed.
Test Freezing Function:
When the fingerprint and password are incorrect for more than 5 consecutive times
(cumulative error for 5 consecutive times, please zero after the door is unlocked successfully),
this alarm is issuedAudible and visual alarm; If the number of errors is greater than or equal
to 5 within 5 minutes, the system freezes for 180 seconds and all operations are disabled
within 180 seconds.
Emergency Power Supply：
When the power supply is exhausted and there is no key, connect the external power supply
and open the door according to the normal operation steps.
Note: 1. Please replace the battery in time after the emergency power supply opens;
2. It is recommended to use a charging bank or charger with output current above
1A for external power supply.
Can realize fingerprint, password, remote dynamic password, mechanical key and
other ways to open the door.
Physical Structure Keys
Functional Characteristics
Follow the menu
instructions Press 1 to
add an administrator
After entering the
password/fingerprint
Automatic registration
password/fingerprint
Add Admin
Deleting An Administrator
Follow the menu
instructionsPress 2 to
delete an administrator
Enter the corresponding
administrator number to
delete
Operate
successfully
Voice prompt
“Please enter
your number”
Network Settings
Follow the menu
instructions Press 3
for networking Settings
Enter the corresponding
sequence Number to
connect
The voice prompt "Hotspot connection
press 1,Press 2 for smart connection,
press 3 to delete connection.
User Settings
Follow the menu
instructionsPress
1 to add a user
After entering your
password Automatic
registration password
Add Users
Voice prompt“Please
enter user information”
Follow the menu
instructions Press 1
to delete a user
Delete User
Enter the
corresponding edit
Number to delete
Door Magnetic Switch
Follow the menu instructions
Choose to press the 4-door
status switch
Left/right Open Setting
Follow the menu
instructions Press 5
or so to open the setting
6. Lnstallation Procedure
3.Door Lock Menu
3.Door Lock Menu
Fingerprint
Door magnet
Battery cover
Lock knob
Affirm
Return
Keyhole
Voice prompt“Please
enter administrator
information”
Voice prompt
“Please enter
your number”
Enter the administrator
password/fingerprint
Follow the menu
instructions Press 2
to unlock the lock
Open Normally Open
Follow the menu
instructions Press 3
to open normally
6
Voice Settings
Follow the menu
instructions Press 1
to set voice Settings
System Settings
The Lock Mode
Follow the menu
instructions Press 2
to unlock the lock
3.Door Lock Menu
Voice prompt “Enable
voicePress 1. To turn off
voice, press 2.”
A single Lock
Follow the menu
instructions Press 1
to unlock the lock
Follow the menu
instructions Press 2
to unlock the lock
Combination Lock
Follow the menu
instructions Press 2
to unlock the lock
Shut Down Normally Open
Follow the menu
instructions Press 4
to turn off normally
Language Settings
Select the language setting
by pressing 2 according to
the menu prompt
Voice prompt“Press 1 for
Chinese, press 2 for English”
4. Networking Settings
1) Enter the APP and click Add Device.
2) Enter the “Manual Add” interface, select “Security Sensor”, and click “Door
Lock (Wi-Fi)”.
3) Enter the interface of “Please reset the device first” and click “Confirm that the
keyboard light flashes quickly”.
4) Enter the “Enter your WIFI password at home” interface. Select WIFI account,
enter the correct WIFI password, and click “OK”.
5) Enter Connecting.
6) After the network is configured successfully, go to the home page of the device.
The OLED screen on the lock side displays: Network configuration is successful.
Distribution Network
Enter the menu and press “1” to manage user Settings. “For administrator
registration, press 1 ,For deleting an administrator, press 2 , Press 3, press 3
to enter the distribution network Settings: Press 1 for hotspot connection, press
2 for smart connection, press 3 to delete connection, and pressPress 2 to enter
the intelligent distribution network.
Procedure On APP
Download The APP
Download the Doodle Smart APP on your phone. Use your phone number and
set up an account.
Procedure For Locking
Fingerprint capacity
50 group
1.Operational Guide
Product Function Description
1.Operational Guide
Enter the “#” key to prompt “Please enter administrator information”, and
enter “123456+#” for voice prompt“For administrator Settings, press 1. For
user Settings, press 2. For system Settings, press 3For factory settings, press 4”.
The default password is 123456.
Enter The Management Menu
Administrator Settings
Press the # key to voice
prompt“Please enter
administrator information”
Press the # key to voice
prompt“Please enter
administrator information”
Press the # key to voice
prompt“Please enter
administrator information”
Press the # key to voice
prompt“Please enter
administrator information”
Press the # key to voice
prompt“Please enter
administrator information”
Press the # key to voice
prompt“Please enter
administrator information”
Press the # key to voice
prompt“Please enter
administrator information”
Press the # key to voice
prompt“Please enter
administrator information”
Press the # key to voice
prompt“Please enter
administrator information”
Press the # key to voice
prompt“Please enter
administrator information”
Press the # key to voice
prompt“Please enter
administrator information”
Press the # key to voice
prompt“Please enter
administrator information”
Press the # key to voice
prompt“Please enter
administrator information”
Press the # key to voice
prompt“Please enter
administrator information”
3.Door Lock Menu 3.Door Lock Menu
working voltag Standard voltage 6.5-8.4V
System standby time > 3000 times
Emergency electrical
power supply
5V, power supply with USB interface
Recognition speed
Low electricity prompt
<20% battery capacity
Password capacity
150 groups
<1S
Successfully
added
Operate
successfully
Successfully
added
Operate
successfully
Operate
successfully
Set according to the
voice prompt
Set according to the
voice prompt
Follow voice
prompts Setting
operations
5.Door Magnetic Switch
The is equipped with an optional integrated door sensor to detect door open/closed
position.To set up the door sensor,slide the sensor slider from the back of interior
assembly.You may need to remove the interior assembly from the door to slide the
sensor slider.
Then, fix the sensor magnet to the door frame with the attached adhesive tape.The sensor
slide should be close to the sensor magnet.
The sensor will then report the door’s position to the app.
door sensor is off by default .This feature can be activated through the app.
Follow the menu instructions
“Press 3 for system Settings”
Follow the menu instructions
“Press 3 for system Settings”
Follow the menu instructions
“Press 3 for system Settings”
Follow the menu instructions
“Press 3 for system Settings”
Follow the menu instructions
“Press 3 for system Settings”
Follow the menu instructions
“Press 3 for system Settings”
Follow the menu instructions
“Press 3 for system Settings”
Follow the menu instructions
“Press 3 for system Settings”
Follow the menu instructions
“Press 1 for administrator
Settings”
Follow the menu instructions
“Press 1 for administrator
Settings”
Follow the menu instructions
“Press 1 for administrator
Settings”
Follow the menu instructions
“Press 2 for user Settings”
Follow the menu instructions
“Press 2 for user Settings”
Operate
successfully
Operate
successfully
Operate
successfully
Operate
successfully
Operate
successfully
Enter the administrator
password/fingerprint
Enter the administrator
password/fingerprint
Enter the administrator
password/fingerprint
Enter the administrator
password/fingerprint
Enter the administrator
password/fingerprint
Enter the administrator
password/fingerprint
Enter the administrator
password/fingerprint
Enter the administrator
password/fingerprint
Enter the administrator
password/fingerprint
Enter the administrator
password/fingerprint
Enter the administrator
password/fingerprint
Enter the administrator
password/fingerprint
Enter the administrator
password/fingerprint
Successfully
delete
The factory Settings are
restored successfully.
Procedure
Voice prompt“Please enter
administrator information”
Follow the menu instructions
“Press 4 to restore factory
Settings”
Follow the menu
instructions Press 2
to unlock the lock
Factory Data Reset
Wi-Fi Smart Lock
ilock 402 Network Edition
9 10
7.Spare And Accessory Parts
1
2 3
4 5 6
Ø54mm
Drilling
Ø54mm
Drilling
Ø5.00
Punching
Ø5.00
Punching
Ounch Postio
(70mm)
(60mm)
Ø25mm
Drilling
Ø25mm
Drilling
Ø2.50
Punching
Ø2.50
Punching
Ounch Postio
FOLD O VER DOO R EDGE
NEW DO OR MARKI NG TEMP LATE
2-1/8"
2-1/8"
2-3/8"
2-3/4"
1"
1"
(35mm)
For 1-3/8"
(44.5mm)
For 1-3/4"
7 8 9
Key （2）
Opening The Template
Steike Screws(4)&Deadbolt Screws(2)
Mounting Screws(8)
Door Magnet
Deadbolt Asswmbly & Strike Plate
Mounting Plate
Touchpad Assembly
Interior Assembly