Preface Notebook User’s Manual
Preface Contents Chapter 1: Preface Content ........................................................................... 1-2 Regulations and Statements ......................................... 1-4 FCC-B Radio Frequency Interference Statement ....... 1-4 FCC Conditions .......................................................... 1-4 CE Conformity ............................................................ 1-4 Battery Regulations .................................................... 1-5 WEEE Statement ........
Energy Saving Tips ..................................................... 3-8 Basic Operations ........................................................... 3-9 Safety and Comfort Tips ............................................. 3-9 Knowing the Keyboard ...............................................3-11 Knowing the Touchpad.............................................. 3-15 About Hard Disk Drive .............................................. 3-17 Using the Optical Storage Device ............................
Preface Regulations and Statements FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Battery Regulations European Union: Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations. Taiwan: For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
Preface Safety Instructions Read the safety instructions carefully and thoroughly. All cautions and warnings on the equipment or user’s manual should be noted. Keep this equipment away from humidity and high temperature. Lay this equipment on a stable surface before setting it up. The openings on the enclosure are used for air convection and to prevent the equipment from overheating. Do not cover the openings.
Always keep the strong magnetic or electrical objects away from the equipment. When installing the coaxial cable to the TV Tuner, it is necessary to ensure that the metal shield is reliable connected to protective earthing system of the building. Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable.
Preface Optical Device Drive Notice CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.” To prevent direct exposure to the laser beam, do not try to disassemble the enclosure.
2 Introductions
Introductions Congratulations on becoming an user of this notebook, the finely designed notebook. This brand-new exquisite notebook will give you a delightful and professional experience in using notebook. We are proud to tell our users that this notebook is thoroughly tested and certified by our reputation for unsurpassed dependability and customer satisfaction. Manual Map This User’s Manual provides instructions and illustrations on how to operate this notebook.
Product Overview This section provides the description of basic aspects of the notebook. It will help you to know more about the appearance of this notebook before using it. Please be aware that the notebook shown in this section may vary from the actual one that users purchased. Top-open View The figure of top-open view and description shown below will lead you to browse the main operating area of your notebook. These accessories listed above may change without notice.
Introductions 1. Webcam This built-in Webcam can be used for picture taking, video recoding or conferencing, and any other interactive applications. 2. Internal Microphone This is the built-in microphone and its function is the same with microphone. 3. Stereo Speakers Give high quality sound blaster with stereo system and Hi-Fi function supported. 4. Power Button / Power LED Power Button Press the power button to turn the notebook power ON and OFF.
Press this button repeatedly to turn the WLAN function on or off recurrently. WLAN (WiFi) Press this button to increase the fan speed to cool down the overall temperature of the notebook. Cooler Boost P1 Press this button repeatedly to turn this function on or off recurrently. Press this button to launch the User Defined application. Press this button again to turn this function off. User Defined 6. Keyboard The built-in keyboard provides all the functions of a full-sized keyboard.
Introductions + Bluetooth (Optional) 7. Press and hold the Fn button, and then press the F9 button to turn the Bluetooth function on. This function button will not be available when the Bluetooth function is not supported. Touchpad Switch Press this button to enable or disable the touchpad function. equipped, glows when the touchpad function is disabled. 8. Press again to turn it off. Touchpad This is the pointing device of the notebook.
Front Side View 1. Status LED Hard Disk/ Optical Drive Device In-use Blinking blue when the system is accessing the hard disk drive or the optical drive device. Bluetooth Bluetooth LED indicator glows blue when Bluetooth function is enabled. Warning: For flight safety consideration, make sure this LED indicator goes out when you are in flight. Bluetooth Note: The Bluetooth Function may be optional supported depending on the model users purchased.
Introductions Battery Status Glowing blue when the battery is being charged. Blinking amber if the battery fails and it is recommended to replace a new battery. Consult the local dealer for purchasing an equivalent type of battery recommended by the manufacturer. Battery LED goes out when it is fully charged or when the AC/DC adapter is disconnected. Caps Lock: Glowing blue when the Caps Lock function is activated. Num Lock: Glowing blue when the Num Lock function is activated.
Right Side View 1. Optical Drive Device This notebook is equipped with an optical drive device. The actual device preinstalled in the notebook depends on the model you purchased. 2. VGA Port The 15-pin-D-sub VGA port allows you to connect an external monitor or other standard VGA-compatible device (such as a projector) for a great view of the computer display. 3. USB 2.0 Ports The USB 2.
Introductions Left Side View 1. Kensington Lock This notebook provides a Kensington Lock hole, which allows users to secure the notebook in place with a key or some mechanical PIN device and attached through a rubberised metal cable. The end of the cable has a small loop which allows the whole cable to be looped around a permanent object, such as a heavy table or other similar equipment, thus securing the notebook in place. 2. Ventilator 3. USB 2.0/ 3.
6. Audio Port Connectors Make high quality sound blaster with stereo system and Hi-Fi function supported. Headphone out/ SPDIF-out Used for speakers or headphones. The S/PDIF connector is also provided for digital audio transmission to external speakers through an optical fiber cable. Connect the Front speakers here. Microphone/ Line In: Used for an external microphone. Connect the Center and Subwoofer speakers here.
Introductions Rear Side View 1. Battery Pack This notebook will be powered by the battery pack when the AC/DC adapter is disconnected.
Bottom Side View 1. Battery Release Button It is a bounce-back device as a preparation for releasing the battery pack. Slide it with one hand and pull the battery pack carefully with the other. 2. Battery Pack This notebook will be powered by the battery pack when the AC/DC adapter is disconnected. 3. Battery Lock/Unlock Button Battery cannot be moved when the button is positioned on lock status. Once the button is slid to unlock position, the battery is removable. 4.
Introductions Specification The Specification may change without notice. The actual products sold are different from areas. Please check the detailed Specification with your local dealers. Physical Characteristic Dimension 383(W) x 249.5 (D) x 37.6~32.3 (H) mm Weight 2.
Mic-in (Line-in ) x1 Headphone-out(SPDIF-Out) x1 RJ45 x1 HDMI x1 Card Reader 6-in-1 (SD/SDXC/MMC/MS/MSPRO/xD) The supported memory cards may vary without notice. Communication Port LAN 10/ 100/ 1000 Ethernet Wireless LAN 802.11 b/g/n Bluetooth Optionally supported Display LCD Type 15.6" LED panel Brightness Controlled by K/B hot-keys Video Graphics NVIDIA GeForce discrete graphics + Intel HD graphics UMA VRAM GDDR5, 2GB Depends on the model you purchased.
Introductions Software & BIOS USB Flash Boot Yes, USB floppy boot up DOS only BIOS Fast Boot Support --- Yes Others Compliance WHQL Kensington Lock Hole x1 2-16
3 Getting Started
Getting Started Begin to Use the Notebook For a new user of this notebook, we would like to suggest you follow the illustrations below to begin to use the notebook.
Power Management AC Power It is strongly recommended to connect the AC/DC adapter to the notebook and use the AC power while using this notebook for the first time. When the AC power is connected, recharging the battery will start immediately. Note that the AC/DC adapter included in the package is approved for your notebook; using other adapter model may damage either the notebook or other devices attached to it. Do not cover the AC/DC adapter since it may produce a certain heat while in use.
Getting Started Installing the Battery Pack 1. Locate the steady gutter of the battery pack, and the battery bolt on the battery tray as shown right. 2. Align the steady gutter and battery bolt with correct orientation and make sure they are joined properly. 3. Overturn the battery pack with the direction shown right 4. Press down the battery pack to fasten the battery pack in the battery tray. 5.
Releasing the Battery Pack 1. Make sure the notebook is turned off, and the AC power is disconnected. 2. Press the lock/unlock button to the unlocked position. 3. Locate the battery release button on the bottom side. 4. Push and hold the release button to the battery releasing direction as shown on the bottom side. 5. Dig the edge of battery pack out of the battery tray with your finger tip. Be careful with your finger while trying to take out the battery pack. 6. And then pull the battery pack out.
Getting Started Battery Safety Tips Replacing or handling the battery incorrectly may present a risk of fire or explosion, which could cause serious injury. Only replace the main battery pack with the same or equivalent type of battery. Do not disassemble, short-circuit or incinerate batteries or store them to temperatures above +60° C (+140° F). Do not temper with batteries. Do not use rusty or damaged batteries. Keep away from the reach of children.
Power Management in Windows OS Power management of personal computers (PCs) and monitors has the potential to save significant amounts of electricity as well as deliver environmental benefits. To be energy efficient, turn off your display or set your PC to standby/hibernate mode after a period of user inactivity.
Getting Started The Shut Down Computer menu will present the options to Sleep (S3/S4), Shut Down (S5), or Restart your computer. The computer should be able to wake up from power saving mode in response to a command from the power button. Energy Saving Tips Activate the ECO power saving function to manage the computer’s energy consumption. Turn off the monitor after a period of user inactivity. Utilize the Fn and F12 sleep mode keys to turn into power saving mode.
Basic Operations If you are a beginner to the notebook, please read the following instructions to assure your own safety, and make yourself comfortable during the operations. Safety and Comfort Tips The notebook is a portable platform that allows you to work anywhere. However, choosing a good workspace is important if you have to work with your notebook for a long period of time.
Getting Started 1. Your work area should have enough illumination. 2. Choose the proper desk and chair and adjust their height to fit your posture when 3. When sitting on the chair, adjust the chair’s back (if available) to support your back 4. Place your feet flat and naturally on the floor, so that your knees and elbows have the 5. Put your hands on the desk naturally to support your wrists. 6. Adjust the angle/position of the LCD panel to have an optimal view. 7.
Knowing the Keyboard This notebook provides a full-functioned keyboard. This keyboard can be divided into four categories: Typewriter keys, Cursor keys, Numeric keys and Function keys. 1. Typewriter keys 2. Numeric keys 3.
Getting Started Typewriter Keys In addition to providing the major function of the keyboard, these typewrite keys also provide several keys for special purposes, such as [Ctrl,] [Alt,] and [Esc] key. When the lock keys are pressed, the corresponding LEDs will light up to indicate their status: 1. Num Lock: Press this key to toggle the Num Lock on and off. When this function is activated, you can use the numeric keys that are embedded in the typewriter keys. 2.
Increase the LCD brightness. + Decrease the built-in speaker’s volume. + Increase the built-in speaker’s volume. + Disable the computer’s audio function. + Force the computer into sleep state (depending on the system configuration). + Quick Launch [Fn] Keys Use the [Fn] buttons on the keyboard to activate the specific applications or tools. With the help of these quick launch buttons, users will be able to do work more efficiently.
Getting Started + Bluetooth (Optional) 3-14 Press and hold the Fn button, and then press the F9 button to turn the Bluetooth function on. Press again to turn it off. This function button will not be available when the Bluetooth function is not supported.
Knowing the Touchpad The touchpad integrated in your notebook is a pointing device that is compatible with standard mouse, allowing you to control the notebook by pointing the location of the cursor on the screen and making selection with its two buttons. 1. Cursor Movement Area This pressure-sensitive area of the touchpad, allows you to place your finger on and control the cursor on the screen by moving one of your finger. 2. Right / Left Buttons Acts as the mouse’s right/ left button.
Getting Started Point and Click When you have moved and placed the cursor over an icon, a menu item or a command that you want to execute, simply tap slightly on the touchpad or press the left button to select. This procedure, called as point and click is the basics of operating your notebook. Unlike the traditional pointing device such as the mouse, the whole touchpad can act as a left button, so that your each tap on the touchpad is equivalent to pressing the left button.
About Hard Disk Drive Your notebook is equipped with a 2.5-inch hard disk drive. The hard disk drive is a storage device with much higher speed and larger capacity than other storage devices, such as the floppy disk drive and optical storage device. Therefore, it is usually used to install the operating system and software applications. To avoid unexpected data loss in your system, please backup your critical files regularly. Do not turn off the notebook when the hard disk In-use LED is on.
Getting Started Inserting the Disk 1. 2. Confirm that the notebook is turned on. Touch the EJECT quick launch button nearby the keyboard and the disk tray will slide out partially. Note that the ODD EJECT button is functional under pure DOS system. However, in an Operating System without the S-Bar application installed, the EJECT button will not be functional. In such a case, users can right-click the ODD in "My Computer" and select "Eject" to eject the ODD tray. 3.
Connecting the External Devices The I/O (input/output) ports on the notebook allow you to connect peripheral devices and communication devices. All functions and devices listed here are for reference only. Peripheral Devices The functions listed here are supported optionally, depending on the model users purchased. Contact the local dealer for detailed information.
Getting Started Communication Devices The functions listed here are supported optionally, depending on the model users purchased. Contact the local dealer for detailed information.
Components Replacement and Upgrade Please be noticed that the memory, hard disk drive, wireless LAN / Bluetooth module and battery pack preinstalled in the product users purchased may be upgradable or replaceable by user’s request depending on the models users purchased. This notebook is equipped with a high-capacity Li-ion battery pack, and the battery pack is replaceable by users.
Getting Started This notebook is equipped with a hard disk drive, and this storage device may be upgradable and replaceable by the authorized dealer or service center. Additional memory module may be installed, by the authorized dealer or service center, to increase the performance of this notebook, depending on the specification limitation. This notebook is equipped with a wireless LAN module, and the module may be upgradable and replaceable by authorized dealer or service center.
FAQ S-Bar is not working Please update S-Bar to the latest version to solve the problem Unable to boot from the built-in HDD when a bootable e-SATA hard disk is connected. Please update BIOS to the latest version. Error message “ERROR:BIOS has no flash information available” occurs while flashing BIOS. This is a protection purpose to prevent the system crash if the system is out of power unexpectedly while the flash process is still on going.
Getting Started My Internet connection has problems. 1) Have your phone company check that your phone line is free from any line noise. 2) If you are having a problem connecting with your Internet Service Provider (ISP), check that the ISP is not experiencing technical problems. 3) Check the ADSL settings and connection and make sure your notebook is properly configured for Internet access. 4) The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points.