INSTALLATION INSTRUCTIONS XCM1U (Shown installed to CPA Series extension column as example only) Extra Large Flat Panel Ceiling Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description XCM1U
XCM1U Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions XCM1U DIMENSIONS 5.8 147.9 TO C/L OF COLUMN COLUMN SOLD SEPARATELY TILT LOCKOUTS AT 0°, 10°, AND 20° 20° MAX TILT ROLL ADJUSTMENT 15.75 400.0 MAX MOUNTING PATTERN HEIGHT 31.9 810.
XCM1U Installation Instructions LEGEND 4 Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Bevest
Installation Instructions XCM1U TOOLS REQUIRED FOR INSTALLATION #2 3/32" (included) 1/8" (included) 5/32" (included) M5 (included) 1/2" or 13mm PARTS [Interface Bracket Hardware Kit] A (8) M4x16mm E (6) M5x20mm I (6) M8x20mm B (6) M4x20mm C (6) M4x25mm F (6) G (6) M5x25mm M6x16mm J (6) M8x30mm M (8) L (8) .750x.344x.500 .750x.323x.
XCM1U Installation Instructions INSTALLATION IMPORTANT ! : The following procedure assumes that: • • a UL Listed CPA or CMA ceiling plate (not included); AND a 1-1/2" NPT or NPSM following ANSI/ASME B1.20.1 (Schedule 40, 0.154" minimum thickness steel or aluminum-ASTM B221) threaded extension column (not included); OR a UL Listed Chief CPA Series extension column (not included) has been properly installed following instructions provided with ceiling plate and extension column.
Installation Instructions XCM1U Attaching Mount to CPA Extension Column CAUTION: WATCH FOR PINCH POINTS! Do not place 5. Install two 5/16" x 1" self-tapping screws (U) through two 5/16" flat washers (V), bottom stop collar (AA), and into installed column. (See Figure 5) 6. Install and tighten 5/16" x 3/4" set screw (W) into bottom stop collar (AA). (See Figure 5) 7.
XCM1U 2. Installation Instructions Align the center of the interface bracket (EE) with center of screen. (See Figure 8) NOTE: The diamond-shape hole in the bracket corresponds to the center of the mount. 2 (L or M) 3 (N) 3 2 Center of bracket (EE) 3 (A-K) Latch mechanism Figure 8 Figure 9 4. Fasten bracket against ceiling mount extrusion using one 10-24 x 5/8" button head cap screw (Y). (See Figure 10) 5. Repeat for other interface bracket.
Installation Instructions XCM1U Adjustments CAUTION: Watch for pinch points! Do not place fingers between moveable parts. Roll 3 The ceiling mounts allow up to 3° roll each direction. 1. 2. Turn the roll adjustment bolt in the direction necessary for the desired roll. (See Figure 11) Tilt 5 Stop adjusting when the desired setting is reached.
XCM1U 2. Installation Instructions Install back cover (DD) into four holes on back of ceiling mount.
Installation Instructions XCM1U 11
XCM1U Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8800-002443 Rev00 2013 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 10/13 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.