Smart WiFi Baby Monitor User Manual
Names of Parts Status Indicator Microphone microSD Card Slot Speaker Micro USB Port Lens Night Light Button WPS Button Night Light Power/Mode Button Temperature Sensor Micro USB Port English | 1
Getting Started Mobile connects to smart WiFi baby monitor directly via App [Unieye Care] for remote control, live view, lullaby playback, Night Light control and receives push alerts when events are detected. For initial use, mobile needs to: 1. Connects to internet (via WiFi, 3G/4G). 2. Download and install App [Unieye Care] from Google Play Store or Apple App Store. Unieye Care Camera needs to: 1. Insert a microSD Card (suggested class 10, up to 64GB) 2.
Wireless & App Operation Run App [Unieye Care] on mobile and navigate either one of functions: (I) Local - Direct control (II) Internet - Internet control Unieye Care (I) Local 【Local】 Internet Mobile directly connects to camera via WiFi for remote control, live view, lullaby playback, night light control, camera setup, and receives push notification when noise and motion events are detected.
Local 【Local】Function Internet Before using mobile App's【Local】function, ensure mobile WiFi been on and camera status indicator shows steady orange. Mobile Connects to Camera 1. For Android: Turn on [Wi-Fi]. For iOS: Go to [Settings] [Wi-Fi]. Turn on [Wi-Fi] and select the camera name. 2. Run [Unieye Care]. 3. Tap【Local】and select the camera to enter View Page. Tap [ ] to scan again if camera is not found. Note: For first use, password is not required. User can set camera password in Setup Page.
4.【Local】function has three function pages: View, Album and Setup. View Page Items Descriptions Adjust brightness level of night light. Play lullaby. Mute the sound from camera. Shoot videos or take photos and saved files into mobile "Album\Unieye Care\". Talk to camera from mobile. Events Page (for camera) Items Camera Videos Descriptions View or delete video files recorded and saved in camera during motion and noise detection.
Camera Internet Setup Before using internet, Internet Settings must be properly setup. Camera has two different procedures to complete Internet Settings: (I) AP without WPS (II) WPS wireless router (I) AP without WPS 1. Go to [Setup] [ Internet Settings] Edit Email and AP 2. Tap [Save] to complete Email & AP settings.
Local Internet 【Internet】Function A camera can setup【Internet】Function by 2 methods: (I) Setup Wizard (II) Others (I) Setup Wizard 1. Run [Unieye Care] and tap【Internet】. 2. Tap and follow the instructions to view internet live videos. (II) Others Intenet Main Page Before adding a configured camera or using another mobile, ensure the camera is in 【Internet】function and status indicator shows steady green. 1. Run [Unieye Care] and tap【Internet】. 2. Tap Others in list. Enter camera ID and password.
Transfer Files to PC 1. Use Micro USB cable to connect camera to PC. 2. Find videos at "My computer\Removable Disk\". 3. Copy, move, delete, or playback videos on PC. Camera Hotkey Micro USB Port Camera Hotkey Forced Shutdown Press and hold Forced Factory Settings for 5 seconds to turn off camera. • Camera: Power on camera Press and hold WPS Night Light button and press Alert beep tones to complete the default settings.
Troubleshooting Situation Cause/Solution Camera cannot turn on Power is low.
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.