WiFi Car DVR User Manual
Names of Parts GPS Receiver Slot Lens Micro HDMI Port Speaker Tripod Mount Mic Status Indicator LCD Panel Micro USB Port microSD Card Slot Power/Menu Button Record Button Emergency Button English | 1
Getting Started Inserting a microSD Card Before initial use, insert a microSD card. (suggested at least 4GB, up to 64GB) Charging the Unit microSD card Fully charge camcorder for initial use by: • Car charger • PC USB port • USB adapter (not included) During charging, screen shows battery icon or status indicator flashes in orange. When camcorder is fully charged, the indicator turns off. Shooting a Video 1. Power on: Press to turn on camcorder. 2. Record: Press to start recording.
Camcorder Operation In preview, press to enter menu settings. Button functions indicated by . Use to navigate menu settings and to back to preview . Menu Settings Camcorder has eight menu settings. Advanced settings can be set up via mobile APP.
Record Modes Camcorder has two recording modes for different applications: Action Cam: Shoot normal videos. Dash Cam: Shoot loop and emergency videos. Comparison between modes: Mode Record type Record trigger Record duration Display info. Action Cam Dash Cam Normal Press Loop in preview Unlimited Three min. sections 00:06:36 SD card remaining time Emergency • Car impact • Press during loop recording One min.
Wireless & APP Operation Before inital using wirless connections, download and install APP [Unieye Drive] from Google Play Store and Apple Store. [Unieye Drive] has two functions: (1) Local - Direct control (2) Internet - Internet live view Local Unieye Drive (1) Local Internet 【Local】 Internet Mobile connects to camcorder directly via WiFi for remote control, live view, album management and camcorder setup.
Local 【Local】Function Internet Before using mobile APP's【Local】function, ensure camcorder WiFi is on and camcorder Cloud setting is off. Once WiFi is ready, preview shows camcorder name (R2-xxxxxxxx) for few seconds. Mobile Connects to Camcorder 1. For Android: Turn on [Wi-Fi]. For iOS: Go to [Settings] [Wi-Fi]. Turn on [Wi-Fi] and select the camcorder name. 2. Run [Unieye Drive]. 3. Tap【Local】and select the camcorder to enter【Local】View Page. Tap [ ] to scan again if camcorder is not found.
4.【Local】function has three function pages: View, Album and Setup. View Page Items Descriptions Shoot videos and files are saved into camcorder microSD card Shoot videos or Take photos and files are saved into mobile "Album\Unieye Drive\" For multiple camcorders user : • Enable Quad-View for multiple live view on mobile • In Quad-View, select a window for single view.
Camcorder SD Card Setup When SD card is first-time use or reformatted in camcorder, user should allocate memory for Portable Mode and Car Mode. Go to [Setup] [ Camcorder Settings] Adjust slide bar and press [Format] button to complete SD card setup. Camcorder Internet Setup Before using internet cloud service, Email and AP must be properly set up. 1. Go to [Setup] [ Internet Settings] Edit Email and AP 2. Tap [Save] to complete Email & AP settings.
Motion Detector Setup When car's engine stops and motion is detected, camcorder automatically records videos till no motion is detected. 1. Set Camcorder to dash cam mode. 2. Go to APP [Setup] [ Car DVR Settings] Turn on [Motion Detector] Tap [Save]. 3. Camcorder shows on screen. 4. When car's engine stops, operate camcorder to active [ Motion Detector]. G-Sensor Setup When camcorder is recording and any impacts happen, camcorder automatically records emergency events if G-Sensor is set.
Local Internet 【Internet】Function Before using APP's【Internet】function, ensure camcorder internet setup has been completed. Camcorder Connects to Cloud Server Enable [Cloud ] in camcorder to upload video streaming to cloud server. Connecting status will be shown on screen. Status Descriptions Connection successful. Preview shows [ camcorder ID.
Troubleshooting Situation Camcorder cannot turn on Cause/Solution Power is low.
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.