User's Manual

ManualsBrandsChic Technology ManualsComputers & AccessoriesRF/ Optical Mouse

RF Wireless Optical Mouse User's Manual

FCC Statement on CLASS B

Dear Customer

Congratulations on your purchasing ! A creative, non-ball and non-cable, mouse was born ! Without

mouse ball, make you comfortable to scroll the internet and document. Instead of wiry hassle, make you

feel free to surf the net. The RF Wireless Optical Mouse is what you need for New Year and Century.

Please take some time to read the following instructions carefully for protecting your mouse.

Note:

This equipment has been tested and found to comply with the limits for a CLASS

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment

is operated in a residential installation. This equipment generates, uses, and

can radiate radio frequency energy and if not installed and used in accordance

with the instruction manual may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular Installation .If this equipment does cause

interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

* Reorient or relocate the receiving antenna.

* Increase the separation between the equipment and receiver.

* Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

* Consult the dealer or an experienced radio TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) this device may not cause harmful interference.

(2) this device must accept any interference received, including

interference that may cause undesired operation.

Summary of content (9 pages)

PAGE 1
RF Wireless Optical Mouse User's Manual 1994-2000 Copyright All Rights Reserved FCC Statement on CLASS B Dear Customer Congratulations on your purchasing ! A creative, non-ball and non-cable, mouse was born ! Without mouse ball, make you comfortable to scroll the internet and document. Instead of wiry hassle, make you feel free to surf the net. The RF Wireless Optical Mouse is what you need for New Year and Century.
PAGE 2
1. Hardware Installation 1-1.Installing a Mouse with Mouse Port (PS/2) Connector If you have a mouse with a round mouse port connector, you must turn off the computer before connecting or disconnecting your mouse. 1-2.Installing a USB Mouse When you use a mouse with USB connector , you don’ t have to shut off the computer. Just plug the USB connector into the USB port 1-3.Installing a Combo (USB→PS/2)Mouse The Combo Mouse comes with a USB connector, together with a USB→PS/2 port adapter.
PAGE 3
Mouse software supports DOS, Windows 3.1, Windows 95, Windows 98, Windows NT 3.51, Windows NT 4.0, Windows 2000 and Windows ME. Before installing any software under Windows NT 4.0, we strongly recommend you create an Emergency Repair Disk using the Repair Disk utility provided by the system (RDISK.EXE). Please note that USB mice are only supported under Windows 98 , Windows 2000 and Windows ME. 2-1. Mouse Driver for DOS Run Dosinst.bat to install the DOS mouse software.
PAGE 4
1) 2) 3) 4) 5) 6) 7) 8) Click on the "Start" button on the Windows Desktop. Select "Settings", then "Control Panel". From the Control Panel, double click on the "System" icon. From the System Properties, click on the "Hardware" tab. Click on the "Device Manager" button. From the Device Manager, double click the "Mouse" icon. Double click on the Mouse Type icon. From the Mouse Properties dialog box, click on the "Driver" tab, then click on the "Update Driver" button.
PAGE 5
) 6) 7) 8) 9) 10) 11) 12) 13) From the "General" tab, click on "Change". Insert the Mouse Driver Disk/CD-ROM into the disk drive. Click the "Have Disk" button. When prompted, click the Browse button. Double Click on the drive letter that Mouse Driver Disk resides. Click the "Open" or "OK" button. Click on the "OK" button. Select "Show all Devices" Under "Models", select the correct model that matches the pointing device type and click on the "OK" button.
PAGE 6
device type and click on the "Next" button. 19) Click the "Next" button, then click on "Next" again. 20) Click on the "Finish" button. 21) Windows may request that you restart your system. Click on the "Yes" button to restart. 2-5. Mouse Driver for PnP mouse and USB mouse. When computer system detects your PnP mouse or USB mouse, it will show a dialog with "New Hardware Found" displayed. Follow the steps below to install the mouse drivers.
PAGE 7
4-1.Moving problems 4-1-1.First please avoid to the following places for the proper installation. 1) The direct rays of the sun 2) Hot, cold, dusty, moisture or unstable places 3) Under the magnetic force. 4) Near fax machine, TV sets, radio, cellular phones and other RF products 5) On metal board 4-1-2.Check the following notes for moving precisely.
PAGE 8
2) If you have a mouse with both serial and mouse port adaptors, connect the mouse to the computer through the serial port. Reboot and check if the mouse is detected properly. 3)If adaptor(s) were not included in your package, your mouse was designed to work only on USB port. Refer to your package for the type of port your mouse supports. If the problem persists, please check for a possible computer BIOS ROM upgrade from your computer manufacturer.
PAGE 9
Specifications 1. Description: It is a 27MHZ Two Channel RF & Optical Mouse , It use switch to select channel . 2. Feature: a) b) c) e) f) FSK Modulation/Demodulation. Designed for 27.1MHZ /27.045MHZ ISM Band wireless communication. Two Channel Transmitter/Receiver. AAA( UM-4, 1.5V) battery : 2 pcs. 2400 bps data rate communication. 3. Specifications of RF Module Item 1 Parameter Description Tx Module Rx Module Channel 1 Channel 2 Channel 1 27.1 MHZ 27.045 MHZ 27.