C H I A Y O Personal Wireless Portable Amplfier Operation Manual IC:3563A-COACH400 FCC ID:CINSQ-1016 FCC ID:CINSM-1016
● Coach 400 operating instruction Congratulation and thank you for the purchase of this all-in-one ultra compact portable sound system. To ensure a trouble-free operation, please read this manual thoroughly to fully understand its controls and functions. The main features of Coach 400 are as below: ◎ High efficiency output power with inbuilt 25W class-D power amplifier. ◎ Truly wireless! Battery operation eliminates all cables so you can take it anywhere.
Coach 400 Rear control panel ● Parts and function 1 3 2 4 5 13 12 17 18 19 6 7 8 9 10 11 14 20 15 16 21 1. Power and volume control of wireless microphone 2. Channel selector 3. RF signal indicator 4. USB port 5. LCD display 6. Play ／ Pause 7. Skip forward 8. Folder forward 9. Play mode: Short press to switch between "repeat all", "repeat single" and "play random". Press for 1-2 seconds to change "EQ" modes. 10. Skip backward 11. Folder backward 12.
● Recharge its inbuilt Lithium battery before first use After unpacking the unit for the first time, please charge the unit for about 4~5 hours before any operation. This is absolutely necessary as the built-in rechargeable battery might have been discharged naturally due to long shipment and storage time, even though it has been fully charged in the factory prior to shipment.
UHF handheld microphone SQ-1016 ● Parts and functions 1. Microphone module and ballscreen 2. Power/Battery low indicator 1 3. Power switch 4. Channel selector 5. Battery cover 6. charging port 2 3 4 5 6 ● Battery installation SQ-1016 microphone requires 2 AA-size batteries to operate. Please insert the batteries according to the correct polarity. Many batteries are known to have leakage problem of conductive and corrosive liquid.
VHF handheld microphone Q-1005 ● Parts and functions 1 2 3 4 1. Microphone module and ballscreen 2. Power/Battery low indicator 3. Power switch 4. Battery cover ● Battery installation Q-1005 microphone requires 2 AA-size batteries to operate. Please insert the battery according to the correct polarity. Many batteries are known to have leakage problem of conductive and corrosive liquid. Please observe the rule to remove the battery if it's not to be used for a longer period.
UHF beltpack transmitter M-815 VHF beltpack transmitter M-1005 ● Parts and functions 1. Antenna 2. Power/Battery low indicator 3. Power switch 4. Mini XLR connector 5. Release buttons of battery compartment 6. Battery cover 7. Lavalier microphone 8. Charging contacts 9. Gain control (GT, hign impedance) 10. Gain control (MT, low impedance) 1 2 3 4 9 10 5 6 7 8 ● Battery installation M-815/M-1005 microphone requires 2 AA-size batteries to operate.
FCC Caution This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
