User's Manual

Wireless Charger WCC-01

Information for the User Manual

Model No: WCC-01

FCC ID: 2A6QT-WCC-01

Specification:

Input: DC5V 2A, DC9V 1.67A, DC12V 1.5A

Output: DC5V 1A, DC9V 1.1A, DC12V 1.25A

Charging distance: <8mm

Conversion: >72%

Diameter: 69mm x H14 mm

How to use:

This charger is designed for Qi-compatible devices. If your phone does not have

built-in wireless charging capabilities, please use a certified Qi wireless charging case

or receiver.

Refer to your phone’s user manual for detailed features and functions.

1.We suggest to use QC3.0 adapter or DC12V adapter input for fast charging.

2.Do not place metal objects, magnets, magnetic stripe cards, and hard drive based

devices near the wireless charger. It may cause data corruption.

3.Do not attempt to modify, disassemble, or repair this product.

4.Do not expose to water, moisture, or extreme temperatures ( below 40℉ or above

90℉)

PAGE 1
Wireless Charger WCC-01 Information for the User Manual Model No: WCC-01 FCC ID: 2A6QT-WCC-01 Specification: Input: DC5V 2A, DC9V 1.67A, DC12V 1.5A Output: DC5V 1A, DC9V 1.1A, DC12V 1.25A Charging distance: <8mm Conversion: >72% Diameter: 69mm x H14 mm How to use: This charger is designed for Qi-compatible devices. If your phone does not have built-in wireless charging capabilities, please use a certified Qi wireless charging case or receiver.
PAGE 2
Warning! Federal Communication Commission Statement (FCC, U.S.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.