Operator's Manual

Page 9
USING INCLUDED AC POWER
ADAPTOR (FIG. 3)
Open the dust protection cover on the
right side of the radio, insert the AC power
adaptor plug into the DC socket.
Plug the adaptor into a standard power
outlet. Whenever the adaptor is used, the
battery pack is automatically disconnected.
The AC power adaptor should be
disconnected from the power outlet when
not in use.
NOTE: The battery pack cannot be charged
by using the power adaptor. The battery
pack can only be charged using chargers
specified earlier in this manual.
After using AC power adaptor, replace the
dust protection cover to protect the DC
socket against dust, dirt, or moisture.
FIG. 3
DC Socket
POSITIONABLE FLEXIBLE
ANTENNA
To decrease interference or static noise,
rotate the antenna or move the unit to a
higher elevation. The antenna folds down
and out of the way when not in use.
INTENDED USE
This unit is intended:
- for reception and playback of AM and FM
radio stations,
- for auxiliary (AUX) audio playback from
other audio devices such as cell phones,
MP3 players, CD players etc.,
- for audio playback via Bluetooth
®
from
compatible devices such as cell phones,
- for charging portable devices via USB-A
or Type-C charging ports when the unit is
connected to included AC power adaptor
or installed battery pack.
ON / OFF SWITCH (FIG. 4)
Switching on:
Briey press the On/Off/Volume knob
and
the unit switches on. The display will show
“Welcome” and after 1 second will shift to
operation mode.
Switching off:
Press the On/Off/ Volume knob
and hold
for 2 seconds. The display will show “Power
off” and the unit will turn off within a second.
FIG. 4
OPERATION
AC Power
Adaptor Plug