Important: « Cordless phones such as this one require AC power to operate, When AC power is off, you cannot dial out or conceive incoming calls using your phone. To be safe, you should also have a phone that does not require AC power ko operate {not a cordless phone), 50 you can steel make and receive calls if there Is an AC power failure. Some cordless phones pore ate at frequencies that might cause Interference o nearby TVs and Vars.
O Features Your | 200 MHz Digital Spread Spectrum Cordless Phone urges advanced digital cordless technology to give vou superior sound quality. it uses the DOI MHz band, which means less interference and clearer sound, and greater range than 48/48 MHz cordless telephones.
The base's location affects the phone's range. if you have a choice of several locations, by each fo see which provides the bast performance, Iotas: » Your telephone connects directly fo a modular tel hons fine jack. i your phone {ine tack is not a modular jack, you can update the wiring yourself, using jacks and adapters available at your local Radio Shack store, Or, you can let the phone come pant update the wiring for you.
* fully charged. This is not a malfunction. if the phone stops operating properly, check the base's phone ling cord and AC adapter connections. if the connections are secure but ihe hons still does not work, unplug the base's AC adapter from the AC outlet and disconnect the handset's bat trey pack, Walt 3 minutes, then connect the halter pack and plug the AC adapter back inch the AC outlet. The pong should operate prop rely.
Note: You can answer a call while the handset is on the base by passing any key. However, the call might disconnect while the handset Is on the base, Both the IN USE/LOW BAT ind. cater on the handset and the IN USE Indicator on the base dash whee you receive a call, then the IN NAUSEA BAT indicator lights steadily wheels the handset is In use. To and a call, place the handset on the base or press TALK so the IN JEALOUS BAT Indicator on the handset turns off.
handset, The phone automatically resets to pulse dialing, USING PAGE To page the par son with the handset or to find the handset, prods PAGE on the base. The handset beeps twine for about 1% seconds. The IN NAUSEA BAT indicator on the handset and IN USE Indicator on the base dash. To stop the handset from beeping before it automatically stops, Press TALK tics of prods PAGE. Note: Paging roses not work during = call.
USING AN OPTIONAL HEADSET Your phone's handset is equipped with a headset jack on the Gide of the handset. This jack allows you to connect a headset (not supplied} for hands-free conversation, A variably of headsets are available at your local Radio Shack store, Follow these steps to use & headset. 1. Insert the headsets *Fe-inch {2.5 mm) plug into the {1 jack ofr tha side of the handset. 2.
Problem Suggestion The handset battery pack | Check tha charging contacts on the handset toss not charges, and base. If they are dirty, neap them with : pan eraser, Replace the battery pack (see “Replacing the Battery Pack” on Page 18). ‘The handset does not ring or | Adjust the base's antenna fs an upright recessive a page. Hon. i : Move closer 1 the base. Move the base away from nookie Sores, The hatter pack might be weak. Charge the battery pack by placing the handset on the bass for 12 hours.
REPLACING THE BATTERY PACK I you follow the instructions in "Connecting and Charging the Battery Pack” on Page 7, the battery pack should last about one year, § the battery pack will not hoke a charge for more than 2 hours after an overnight charge, replace it with a new 3.8V, 500 mAh battery pack with & connect. tor that fits the socket in the bat trey accompaniment. You can order a replacement battery pack through your local store. Follow these steps to install the battery pack, than charge the bat.