成都智佑科技有限公司 HY-LC100 Lora concentrator product manual
成都智佑科技有限公司 Directory 1. Product Overview............................................................................................... 1 1.1 Basic parameters.........................................................................................1 1.2 Hardware description................................................................................. 1 2. Concentrator operation...................................................................................... 1 2.1 Add / remove devices................
成都智佑科技有限公司 1. Product Overview 1.1 Basic parameters project describe Network port Wired LAN port LAN*1 WiFi WiFi WLAN Supports 802.11b/g/n antenna indicator light Working indication status 2.4G rod antenna(frequency:2412-2462MHZ) Power supply, data transmission, signal strength, server connection power supply power waste DC5-24v(12v,1A) Key Set One click Reset 1.
成都智佑科技有限公司 3. Wan communication 3.1 MQTTBrief introduction to the agreement When a topic is subscribed by a subscriber, all the messages published on the topic will be received by the subscriber.This is the basic message model of mqtt, the "subscribe publish" model. Lora concentrator and WAN realize data exchange through mqtt protocol.
成都智佑科技有限公司 4.2 Antenna WiFi module uses 2.4G rod antenna to transmit and receive transfer information through antenna. 4.3 LANmouth Local area network connection, full duplex mode, 100m. 5. Usage After the Lora concentrator is powered on, it will automatically self check, connect to the server, select the WiFi to be connected, click the distribution network, configure the network parameters, and then the Lora concentrator will handle the command sent by the server to the Lora concentrator.