Product Instruction

WIC501 Wireless Charger

Product Instruction Manual

01 / Product Parameters

Model: WIC501

Input: 5V*2A/9V*2A/12V*2A

Output: 5V*1A / 9V*1.67A /12V*1.2A

Frequency: 110KHz~205KHz

Ambient temperature: -5℃－40℃

02 / Operation Method

1. Install the Wupi wireless chargers WIC501 on the Wupi motorcycles bracket, and

insert the USB terminal into the USB charger interface of the Wupi motorcycles.

2. In order to start wireless charging for the phone，please make sure the wireless

receiving position of phone is placed correctly on the transmitting range of the

wireless charger,then press the USB switch of the Wupi wireless chargers to start

charging(Usually the wireless receiving position is at the center of the phone);

3. When the charging is completed or the charging needs to be stopped, press the

USB switch of theWupi wireless charger again, and the indicator light will go out.

Note: This wireless charger is not limited to use on motorcycles only.

03/ Indicator LED

Stand-by

Blue light always on

Working--Fast

charging

Red light always on

Working--Slow

charging

Blue light flashes

Metal foreign objects

detected

or Insufficient input

powerout

or deviation from the

right position

Red light flashes

04/ Notes:

1. Please make sure the phone is placed on the center of the wireless charger.

Deviation from the center will decrease the charging efficiency or interrupt the

charging.

2. It should be less than 4mm for the thickness of the phone case, and there should

be no foreign metal objects in the charging area between the phone and wireless

PAGE 1
WIC501 Wireless Charger Product Instruction Manual 01 / Product Parameters Model: WIC501 Input: 5V*2A/9V*2A/12V*2A Output: 5V*1A / 9V*1.67A /12V*1.2A Frequency: 110KHz~205KHz Ambient temperature: -5℃－40℃ 02 / Operation Method 1. Install the Wupi wireless chargers WIC501 on the Wupi motorcycles bracket, and insert the USB terminal into the USB charger interface of the Wupi motorcycles. 2.
PAGE 2
charger. Otherwise, the charging efficiency will be decreased, or the charging could be interrupted, even it could lead to latent danger. 3. It is highly recommended that the ambient temperature should be below 28 degrees Celsius (82.4 degrees Fahrenheit) during the charging period. it could decrease charging efficiency or lead to interruption for the higher ambient temperature. 05/ Safety tips 1.
PAGE 3
--Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radiation Exposure Statement This device complies with RF radiation exposure limits set forth for an uncontrolled environment.