VT-TABLET-5071-TM-FP VT-TABLET-5071-TM-FP User’s Manual Chengdu Vantron Technology, Ltd.
VT-TABLET-5071-TM-FP Contents CONTENTS ................................................................................................................................................................... 2 REVISION HISTORY ...................................................................................................................................................... 2 1 FOREWORD ............................................................................................................................
VT-TABLET-5071-TM-FP 1/ 17
VT-TABLET-5071-TM-FP Revision History No. Version Description Date 1 V1.0 First release 2017/05/08 2 V1.1 Change description 2017/06/27 3 V1.
VT-TABLET-5071-TM-FP 1 Foreword 1.1 Copyright Notice While all information contained herein have been carefully checked to assure its accuracy in technical details and printing, Vantron assumes no responsibility resulting from any error or features of this manual, or from improper uses of this manual or the software. Please contact our technical department for relevant operation solutions if there is any problem that cannot be solved according to this manual.
VT-TABLET-5071-TM-FP 1.3 Statement It is recommended to read and comply with this manual before operating VT-Tablet which provides important guidance and helps decreasing the danger of injury, electric shock, fire, or any damage to the device. 1.4 Disclaimer Vantron assumes no legal liability of accidents resulting from failure of conforming to the safety instructions. 1.
VT-TABLET-5071-TM-FP 1.7 Precautions Pay attention to the product labels/safety instructions printed on silk screens. Do not try repairing this product unless declared in this manual. Keep away from heat source, such as heater, heat dissipater, or engine casing. Do not insert other items into the slot (if any) of this device. Keep the ventilation slot ventilated for cooling. System fault may arise if other items are inserted into this device.
VT-TABLET-5071-TM-FP 1.8 Safety Instructions for Power Cables and Accessories Proper power source only Start only with power source that satisfies voltage label and the voltage necessary according to this manual. Please contact technical support personnel of Vantron for any uncertainty about the requirements of necessary power source.
VT-TABLET-5071-TM-FP 2 Overview 2.1 Introduction Thank you for choosing Vantron. It is our commitment to provide our valued customers with the embedded devices equipped with the state-of-the-art technology and the best product services. Tablet enables the interaction between operators/users and applications, connects industrial control products such as wireless, transducer, battery inside, storage, etc.
VT-TABLET-5071-TM-FP 2.2 Ordering Information 7” TFT LCD, 1920x1200 16:10 Wide Screen, RK-3288, Quad core VT-TABLET-5071-TM-FP 1.8GHz, USB2.0 OTG, 6200mAh battery inside, WIFI/BT4.0/GPS.
V VT-TABL LET-5071--TM-FP 3 VT-T TABL LET-50071-TM M-FP Hardw ware Instru uctionss 3.
VT-TABLET-5071-TM-FP 3.2 Specifications CPU Processor RK-3288 , ARM Cortex-A17, Quad Core CPU,1.6GHz RAM 2GB DDR3 Flash 32GB EMMC Flash LCD 7" TFT LCD Resolution 1920x1200 24bit Color Contrast 1000:1 Brightness 450 cd/m2(Auto brightness by Light sensor) View Angle 85U/85D, 85L/85R Touch Screen Cap-touch, multi-point Supported Audio MP3, 3GPP, WAV format Video MP4, 3GPP Picture BMP, GIF, JPEG, PNG USB 1X USB2.0 OTG Headphone 1X 3.5mm Headphone Wireless 1xwifi 802.
VT-TABLET-5071-TM-FP 3.3 Interface Instructions 3.3.1 Front View 3.3.2 Side View 3.4 Dimension Whole device Size: 226x127x18mm 3.
VT-TABLET-5071-TM-FP save the battery. Lock tablet: Press the Power/Sleep/Wake button. Unlock tablet: Press the Power/Sleep/Wake button, then drag the slider. Turn tablet off: Press and hold the Power/Sleep/Wake button greater than 6 seconds. Turn tablet on: Press and hold the Power/Sleep/Wake button until logo appears. Volume buttons You can use volume up or volume down to adjust the audio volume.
VT-TABLET-5071-TM-FP 3.5mm Headphone Jack with external MIC in It is a standard 4-pole 3.5mm Headphone Jack with external MIC in , every pole signal is defined as below. 3.7.3 WPC The tablet with a standard WPC1.1 passivity receiving terminal. We can charge the table with WPC ant. 3.7.4 3.
VT-TABLET-5071-TM-FP 4 Software Instructions 4.1 Brief Introduction VT-TABLET-5071-TM-FP has been pre-loaded with Android OS, and the system can run program tools to update the system OS, please refer to its software user manual.
VT-TABLET-5071-TM-FP 5 Tips Waste Disposal It is recommended to disassemble the device before abandoning it in conformity with local regulations. Please ensure that the abandoned batteries are disposed according to local regulations on waste disposal. Do not throw batteries into fire (explosive) or put in common waste canister.
VT-TABLET-5071-TM-FP responsibility of possible missing contents and information, errors in contents, citations, examples, and source programs. Vantron reserves the right to make necessary changes to this manual without prior notice. No part of this manual may be reprinted or publicly released in forms of photocopy, tape, broadcast, e-document, etc.
VT-TABLET-5071-TM-FP ISED Warning: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.