User’s Manual VT-TABLET-5081G Hardware Manual Rev 1.3 2019/09/20 Chengdu Vantron Technology Ltd. Co.
VT-TABLET-5081G User Manual Revision record Rev. Date Change Description Editor 1.0 2019-05-08 Initial Version LW 1.1 2019-06-10 Modification Description LW 1.2 2019-08-25 Modification Description LW 1.3 2019-09-20 Modification Format LW -2-www.vantrontech.com.
User’s Manual Table of Contents 1 INTRODUCTION ................................................................................................................................ 5 1.1 PRODUCT DESCRIPTION ................................................................................................. 5 1.2 CONNECTORS DESCRIPTION........................................................................................... 5 2 FOREWORD ............................................................................
VT-TABLET-5081G User Manual 6.2 ANTENNA .................................................................................................................... 17 7 TIPS ..................................................................................................................................................... 19 -4-www.vantrontech.com.
VT-TABLET-5081G User Manual 1 Introduction 1.1 Product Description Vantron offers both ARM and ATOM based Single Boards Computer (SBC) platforms including Cirrus LogicEP9315, RockChipRK3128, RK3368,RK3288,RK3399, Freescale iMX6, iMX8, TI OMAP35xx CortexA8 series, and Intel Skylake and ApolloLake processor boards. In additional to offering the standard SBCs, we also provide professional customization board design services.
VT-TABLET-5081G User Manual 3.3V 3.3 V signal level 5V 5 V signal level USB 5 V tolerant signal PCIe PCI Express signal, not 3.3 V tolerant NC No Connection -6-www.vantrontech.com.
VT-TABLET-5081G User Manual 2 Foreword 2.1 Copyright Notice While all information contained herein have been carefully checked to assure its accuracy in technical details and printing, Vantron assumes no responsibility resulting from any error or features of this manual, or from improper uses of this manual or the software. Please contact our technical department for relevant operation solutions if there is any problem that cannot be solved according to this manual.
VT-TABLET-5081G User Manual For direct or indirect damage to this device or other devices of Vantron caused by failure of conforming to this manual or the safety instructions on device label, Vantron assumes neither warranty nor legal liability even if the device is still under warranty. 2.6 Safety Instructions Keep and comply with all operation instructions, warnings, and information. Pay attention to warnings on this device.
VT-TABLET-5081G User Manual Cleaning Instructions Please power off before cleaning the device. Do not use spray detergent. Clean with a damp cloth. Do not try cleaning exposed electronic components unless with a dust collector. Support for special fault: Power off and contact technical support personnel of Vantron in case of the following faults: The device is damaged. The temperature is excessively high. Fault is still not solved after the operation according to the manual. -9-www.
VT-TABLET-5081G User Manual 3 Over View 3.1 Introduction VT-TABLET-5081Gis abased onRockchip RK3368 Cortex-A53Octa-Core tablet.Built-in 2GB LPDDR3 and 32GB NAND Flash, 8"high resolution LCD with a Capacitive Touch Screen, 5MP Camera, And support wireless and POE power supply. -10-www.vantrontech.com.
VT-TABLET-5081G User Manual 3.2 Order information Order Part Example VT-TABLET-5081G -11-www.vantrontech.com.cn Rockchip, RK3368,1.
VT-TABLET-5081G User Manual 4 Hardware Instructions 4.1 Appearance Figure 4-1 -12-www.vantrontech.com.
VT-TABLET-5081G User Manual 4.2 Interfaces Camera 5M pixel RG LED Audio Jack x2 MIC FM ANT Power button Volume -/+ button NFC ANT QI ANT 2X1W Speaker USB Type-C Figure 4-3 -13-www.vantrontech.com.
VT-TABLET-5081G User Manual 4.3 Structure Download the board structure document from Vantron technology sustain or Vantron net site:www.vantrontech.com.cn 246x151x23.5mm Figure 4-4 -14-www.vantrontech.com.
VT-TABLET-5081G User Manual 5 Hardware Function Description This chapter describe the hardware Features include, switch, jumper, connector and PIN function The interface description ought to consult the connector sketch map. And attach necessary message such as picture. Indicate the figure, PIN1 and match jack 5.1 LG750 LTE module The functions and characteristics of LG750 LTE module are shown as follows: GCT chipset: GDM7243QT; Support Band48 (Fre: 3552.5MHz ~ 3697.
VT-TABLET-5081G User Manual Item Panel Size Number of Pixels Shape Size Display Area Pixel Pitch Number of Colors Display Mode Viewing Direction Luminance Contrast Ratio Interface Specification 8.0” 800x1280 114.6*184.1*2.5 107.64(H) x 172.224(V) 0.0448*0.1344 16.7M Normally Black Full View 250(TYP.) 700(TYP.) MIPI Unit Inch pixels mm mm Mm (cd/m²) - 5.6 Wi-Fi + Bluetooth4.1 The wireless module complies with IEEE 802.
VT-TABLET-5081G User Manual 6 Hardware Operation Notes This section provides a guide to setting up and using of some of the features of the board. For more detailed information on any aspect of the board see detailed hardware description. 6.1 Power preparation 6.1.1 Environment For the assembled or debug platform, be sure there hasn’t any risk of circuit shortness for the board. And make sure the anti-static is done well. 6.1.2 Type-C Power in Please confirm the power input is 5V.
VT-TABLET-5081G User Manual So, in order to ensure that the tablet function can work properly, please do not cover the antenna area with metal shielding devices. Note: 4G antenna frequency is 3552.5MHz ~ 3697.5MHz WIFI and BT antenna frequency is 2.4G and 5G FM antenna frequency is 87 to 108MHz -18-www.vantrontech.com.
VT-TABLET-5081G User Manual 7 Tips Waste Disposal It is recommended to disassemble the device before abandoning it in conformity with local regulations. Please ensure that the abandoned batteries are disposed according to local regulations on waste disposal. Do not throw batteries into fire (explosive) or put in common waste canister.
VT-TABLET-5081G User Manual Notice Considering that reasonable efforts have been made to assure accuracy of this manual, Vantron assumes no responsibility of possible missing contents and information, errors in contents, citations, examples, and source programs. Vantron reserves the right to make necessary changes to this manual without prior notice. No part of this manual may be reprinted or publicly released in forms of photocopy, tape, broadcast, e-document, etc.
VT-TABLET-5081G User Manual - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.