User Manual Model:IB004N PLUS-SHT Product name: Jaalee Beacon
New features of the 3.3 version Beacon firmware Improved Security Add the brute force prevention measures of the password: Beacon would lock automatically when the input password error consecutive for ten times. The default lock time is half an hour, and the lock time can be dynamic configured up to ten hours. Connection Time Limit Limiting the user's connection time, and the longest is within five minutes.
Product Details Jaalee Beacon is developed and produced based on BLE 4.0 and Beacon has the same housing as Beacon. It can work as an independent system. For developers, we provide the Android and IOS SDK, and our hardware interface developed completely by us, so the developers can develop it without using SDK. For iBeacon agreement, all of the parameters can be reconfigured, including Proximity UUID, Major, Minor and Power.
- Built-in Beacon firmware. Compatible with BLE. - Accurate digital RSSI. Excellent link budget (up to 97dB). - Enable remote application, AES security coprocessor. - Ultra wide range transmission power: 4dBm— -40dBm. - Stable performance and controllable state. - All hardware interface completely open. Developers do not need to rely on the SDK for development. The requirement of hardware interface can be customized (achieved a certain number).
How to Start Using Step 1: Download the latest version eBeacon software (version 1.5.0) from apple store. Step 2: Open the Bluetooth and eBeacon software. Step 3: Tapping the Beacon for three to five times on hard things. Beacon can be connected at this moment when you heard buzzing. Step 4: Click on the Beacon in the eBeacon software that need to configure, and enter the password to connect.
Step 5: Now, you can configure and use Jaalee Beacon normally. Working Mode Detail There are three types working mode of Jaalee Beacon. The first is sleep mode, the second is connectable mode, and the third is non-connectable mode. When hit Beacon will enter the connection mode, which can last for 45 seconds. When timeout Beacon will enter the connection mode or sleep mode according to the different configuration. After the disconnection Beacon will enter the connection mode, last for 45 seconds.
When Beacon stays asleep, this mode will wait for being wake-up. Connectable Mode Beacon can only be connected in this mode, which needs triggered by tapping Beacon, and it will last for 45 seconds. It means that Beacon can be connected in 45 seconds after being triggered. And Beacon will restore to sleep mode or non-connectable mode if it is not connected in 45 seconds. Non-Connectable Mode Beacon can radio Beacon’s data properly in the non-connectable mode.
Operation Frequency 2400-2483.5MHz Programmable Frequency Error +/- 20KHz Null Modulation GFSK Null Sleep current About 3.6uA Null Output Power -2.86 dBm Programmable Receiving Sensitivity -93dBm High gain mode Transmission distance Antenna 70meters 50ohm BER<0.1%, Open space Onboard Operation State and Power Consumption State Operation Current (μA) Sleep Mode About 3.6 Connectable Mode About 142 Non-Connectable Mode(Broadcast Interval: 1s) About 22.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B d igital device, pursuant to part 15 of FCC Rules. These limits are designed to provid e reasonable protection against harmful interference in a residential installation. Thi s equipment generates and can radiate radio frequency energy and, if not installed a nd used in accordance with the instructions, may cause harmful interference to radi o communications.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. such modifications could void the user’s authority to operate this equipment. Warning:Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RF warning statement: The device has been evaluated to meet general RF exposure requirement.