User Manual Version: V1.0.0 Intelligent Temperature and Humidity Sensor MS100F Chengdu Finsiot Technology Co.
User Manual Version: V1.0.0 1. Product 1.1 Product Introduction MS100F is a product based on 434 wireless communication protocol, which can detect the temperature and humidity in the air. Through APP settings, intelligent linkage, remote message push and other functions can be realized。 1.2.
User Manual Version: V1.0.0 1.3 Packing list Host *1, instruction *1, warranty card *1, certificate of conformity *1, 3M glue *1, key pin *1 2. Instructions 2.1. Power on / off 2.1.1Press the button for a short time to start and turn on pairing; 2.1.2. Press for more than 5 seconds to reset the device, and reset the device to clear the gateway ID; 2.1.3. Press the button 3 times to shut down the machine and the device is offline 2.2. Pair correlation 2.2.1.
User Manual Version: V1.0.0 3. Specification Type description Model MS100F RF 434MHz The straight line distance is 80m Transmission Distance 2-wall Indoor, 15m Key 1* embedded key ( with a key pin) LED 1*LED 1* Battery Battery The surface is solar panel, which can charge the temperature and humidity node under the condition of minimum illumination. Size φ56*H16.
User Manual Version: V1.0.0 4. Note 4.1. The temperature measurement range of this product is - 10 ~ 50 ℃, which is not suitable for use in harsh environment outside this range; 4.2. The humidity measurement range of this product is 0% ~ 99% RH, please keep away from the harsh environment of high humidity; 4.3. This product is used as a healthy life, not as a measuring tool; 4.4. The above data are laboratory test data, which may be different according to the actual use. 5. After -sales policy 5.1.
User Manual Version: V1.0.0 Detailed terms » 5.1.1. For returned goods, please keep the goods in good condition (the products, packaging accessories and attached warranty cards, certificates, instructions, etc.) and apply for return or replacement. If they are not complete, they will be deemed invalid; 5.1.2. Within 7 days (including 7 days) from the date of receiving the returned goods, Finsiot will refund the price of the goods you paid; 5.1.3.
User Manual Version: V1.0.0 Within one year from the date of receiving the goods, if there is any performance failure of the product, it can be monitored and determined by Finsiot after-sales service center. If it is not damaged by human, it can enjoy free maintenance service. Warm reminder: As the products need customer service and original parts (including foam, packaging bags, packing boxes), the commodity packaging and original parts should be retained for 30 days or long time. 6.
User Manual Version: V1.0.0 FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.