Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 SAFETY DATA SHEET CircuitWorks® Conformal Coating Remover Pen SECTION 1: Identification of the substance/mixture and of the company/ undertaking 1.1 Product identifier Product name : CircuitWorks® Conformal Coating Remover Pen Product code : CW3500 Product description : Coating. Remover. Product type : Liquid. Other means of identification : CW3500 Remover. 1.
Conforms to Regulation (EC) No.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 CircuitWorks® Conformal Coating Remover Pen SECTION 2: Hazards identification Special packaging requirements Containers to be fitted with child-resistant fastenings : Not applicable. Tactile warning of danger : Not applicable. 2.3 Other hazards Other hazards which do not result in classification : None known. SECTION 3: Composition/information on ingredients 3.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 CircuitWorks® Conformal Coating Remover Pen SECTION 4: First aid measures 4.1 Description of first aid measures Eye contact Inhalation Skin contact Ingestion Protection of first-aiders : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 CircuitWorks® Conformal Coating Remover Pen SECTION 5: Firefighting measures Hazards from the substance or mixture : Flammable liquid and vapour. Vapour may cause flash fire. Hazardous combustion products : Decomposition products may include the following materials: carbon dioxide carbon monoxide metal oxide/oxides 5.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 CircuitWorks® Conformal Coating Remover Pen SECTION 7: Handling and storage The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be consulted for any available use-specific information provided in the Exposure Scenario(s). 7.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 CircuitWorks® Conformal Coating Remover Pen SECTION 8: Exposure controls/personal protection Recommended monitoring procedures : If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness of the ventilation or other control measures and/or the necessity to use respiratory protective equipment.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 CircuitWorks® Conformal Coating Remover Pen SECTION 9: Physical and chemical properties 9.1 Information on basic physical and chemical properties Appearance Physical state : Liquid. Colour : Colourless. Odour Odour threshold pH Melting point/freezing point : Not available. : Not available. : Not available. : Not available. Initial boiling point and boiling range : Not available.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 CircuitWorks® Conformal Coating Remover Pen SECTION 11: Toxicological information 11.1 Information on toxicological effects Acute toxicity Product/ingredient name hexamethyldisiloxane acetone 1-methoxy-2-propanol benzyl alcohol Conclusion/Summary Result LC50 Inhalation Gas.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 CircuitWorks® Conformal Coating Remover Pen SECTION 11: Toxicological information Product/ingredient name Category acetone 1-methoxy-2-propanol Category 3 Category 3 Route of exposure Not applicable. Not applicable. Target organs Narcotic effects Narcotic effects Specific target organ toxicity (repeated exposure) Not available. Aspiration hazard Not available.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 CircuitWorks® Conformal Coating Remover Pen SECTION 11: Toxicological information Fertility effects Other information : No known significant effects or critical hazards. : Not available. SECTION 12: Ecological information 12.1 Toxicity Product/ingredient name Result Species Exposure acetone Acute EC50 20.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 CircuitWorks® Conformal Coating Remover Pen SECTION 13: Disposal considerations Hazardous waste : The classification of the product may meet the criteria for a hazardous waste. Packaging Methods of disposal : The generation of waste should be avoided or minimised wherever possible. Waste packaging should be recycled.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 CircuitWorks® Conformal Coating Remover Pen SECTION 15: Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture EU Regulation (EC) No. 1907/2006 (REACH) Annex XIV - List of substances subject to authorisation Annex XIV None of the components are listed. Substances of very high concern None of the components are listed.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 CircuitWorks® Conformal Coating Remover Pen SECTION 15: Regulatory information Malaysia : Not determined. New Zealand : All components are listed or exempted. Philippines : All components are listed or exempted. Republic of Korea : All components are listed or exempted. Taiwan : All components are listed or exempted. Turkey : All components are listed or exempted.
Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II, as amended by Commission Regulation (EU) 2015/830 CircuitWorks® Conformal Coating Remover Pen SECTION 16: Other information Date of issue/ Date of revision : 3/13/2017 Date of previous issue Version : 3/13/2017 : 1.01 Notice to reader To the best of our knowledge, the information contained herein is accurate.
