User's Manual

ManualsBrandsChefsTemp ManualsElectronicsAlarm Thermometer

User Manuals

Caution

 Wear heat-resistant protective gloves when touching the probe during or after cooking.

 Do not use the instrument in the microwave.

 Be careful when handling the sharp probes.

 Keep these devices and the batteries out of reach of children.

 Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to

serious internal burns and death within two hours. If you suspect a battery could have been swallowed or otherwise

caught in the body, seek medical help immediately.

 Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!

 Low batteries should be changed as soon as possible to prevent damage caused by leaking. Never use a

combination of old and new batteries together, nor batteries of different types.

 Wear chemical-resistant protective gloves and safety glasses when handling leaking batteries.

Important information on product safety

 Do not expose the receiver and transmitter to extreme temperatures, vibrations or shocks. Only the probe and the

cable are heat resistant up to 300° C . Never hold the probe directly over a fire.

 Do not immerse the probe and the cable in water. Water can penetrate and cause malfunction. Not suitable for

dishwasher.

 The receiver is not splash proof. Do not use it in the rain.

Features

 Measuring range: -58 ~ +572℉

 Resolution: 0.1℉/° C

 Transmission frequency: 915MHz

 Transmission distance: 500ft at open field

 The RF transmission function can be turned off manually

 Temperature alternatively optional in °C or ℉

 The temperature deviation can be adjusted manually

 The temperature of 4 probes is displayed on the same screen

 Alarm temperature of 4 probes can be set independently

 Maximum and minimum temperature memory of 4 probes

 Backlight function

 Optional sound or light alarm or both

 4 levels alarm volume can be selected or mute

 Receiver with sound / light and vibration alarm warning function

 Low battery indication

 Power Supply:

2 x LR03 AA size 1.5V batteries or 1.2V AA size rechargeable battery

The transmitter can also be powered by the type C data line

Summary of content (7 pages)

PAGE 1
User Manuals Caution  Wear heat-resistant protective gloves when touching the probe during or after cooking.  Do not use the instrument in the microwave.  Be careful when handling the sharp probes.  Keep these devices and the batteries out of reach of children.  Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to serious internal burns and death within two hours.
PAGE 2
User Manuals Production Appearance
PAGE 3
User Manuals Part A A1: Channel 2 probe cable socket A2: Channel 4 probe cable socket A3: Type C data line power supply interface A4: Upper alarm temperature value（CH1） A5: Transmission symbol A6: Low battery indicator A7: Lower limit temperature alarm value（CH1） A8: Real time detection of temperature value（CH1） A9: Maximum temperature record（CH1） A10: Minimum temperature record（CH1） A11: Symbol when alarm tone is set to mute A12: Volume level display A13: CH1----SET button A14: CH1----Alarm ON/OFF button A
PAGE 4
User Manuals B10: Battery cover Initial operation  Take out the receiver, open the bracket B9, pull down the battery cover B10, and install the battery correctly according to the positive and negative signs. After the product is fully displayed, enter the pairing mode for 2 minutes, and you can see the receiving symbol flashing. Before the pairing is successful, all data are displayed as short lines.
PAGE 5
User Manuals 3， Temperature unit conversion  Press button once, the temperature unit will be converted once between Fahrenheit and centigrade. 4， Over temperature alarm setting  Press the 【SET】 key of each channel once to enter the upper limit temperature value setting of the channel. The upper limit temperature value flashes. Press the 【+】 and 【-】 keys to adjust the upper limit value.
PAGE 6
User Manuals  During this 10 minute period, you can press and hold the key mode, and the symbol for 2 seconds to re-enter the pairing will flash again.
PAGE 7
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.