NEM Plus user manual NEM-002 ①touch control panel ⑤power button ②microphone ③earphones charging contacts ④ear cap ⑥type-c input port ⑦charging case contacts ⑧wired headphone jack First use instructions ①Please remove the protective tape before use ② Use the right size which is most comfortable to you and put the earphones into the charging case
Tip: When using it for the first time (or not using it for a long time), please make sure to charge the earphones and charging box before use. Charging case and earphone charging ②Charging for earphones Make sure the charging case with enough battery power, then put the earphones into the charging case, they will enter into the charging mode and the light will be on after about 5s.
②Put earphones into auditory canal,turn the earphones to a firm and comfortable position. Power on 1.Auto power on: Take out the earphones from the charging case, the earphone will automatically power on. 2.Manual power on: If earphone is power off, and the charging case is not available, please tap earphones touch control for 2-3 seconds in the meantime until the blue lights flash.
2) If the charging case is not available, just disconnect the Bluetooth connection between your cell phone and earphones, the earphones will power off automatically after 10 minutes. Pairing ①Earphones pair connection a.Take two earphones out of the charging case b.The two earphones will power on and connect to each other automatically c.Search the Bluetooth name “ NEM Plus Earphones-L” on the phone and click it to connect Tips: 1.
and the L/R earphones will power on and connect to each other automatically, also the master earphone will connect to the bluetooth device automatically. (The last connected Bluetooth device. ②Single earphone connection a.Take any earphone out of the charging case and the earphone light enters the red & blue flash after A few seconds b.Search the Bluetooth name “NEM Plus Earphones-L” on the phone and click it to connect Tips: 1. Left and right earphone can be used separately. 2.
can be heard from both earphones.) Hang up the phone:During the call, double-clickeither of earphones. Reject a call:When calls come in,double-click the either of earphones for 2 seconds and release. Music play:During playing music, double-click the left earphone forprevious track; double-click the right earphone for next track; single-click the either of earphones for pause or play music. Decrease the volume(+):Long touch the left earphone over 3 seconds to turn the volume down.
Charge case: 1、Power on: Press the button of the right side for 2S. 2、Power-off Manual power-off : Press the button of the right side for 2S. Automatic power-off : It will automatic power off after 10 minutes music paused on conditional that not touch the screen. 3、Headphone mode: Wired mode: After inserting the wired earphone into the headphone jack of the left side, turn on the wired headphone mode. Wireless mode: Turn on the BT, and connect wireless headphone.
4、Selection : BT mode: 1)Bluetooth on/off; 2)Search for device:Search the Bluetooth name “ NEM Plus Earphones-L”and click it to connect; 3) Device list. SLEEP mode: There are 20 songs , each song for 1 hour . REST mode: there are 10 songs, each song for 20 minutes . (note: When wired or wireless headphones are connected, the music can only be played.
6、Charging for the charging case Use the charging cable of the packing box, connecting with the power adaptor to charge. LED indicator display status: •Charging (the battery level is displayed in the upper right corner) Note: please charge for the case with DC5V/1A charger or Computer USB (Must choose the formal charger certified by formal factory ); as the charging and discharging of the earphones increases, the battery performance will decrease, which is normal for all rechargeable batteries.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.