User manual

ManualsBrandsChauvet ManualsDJ controllersRogue R2 Spot

User Manual

Summary of content (29 pages)

PAGE 1
User Manual
PAGE 2
Edition Notes Edition Notes The Rogue™ R2 Spot User Manual Rev. 4 covers the description, safety precautions, installation, programming, operation, and maintenance of the Rogue™ R2 Spot. CHAUVET® released this edition of the Rogue™ R2 Spot User Manual in September 2014. Trademarks CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or Copyright Notice Manual Use Chauvet).
PAGE 3
Table of Contents Table of Contents 1. Before You Begin ...................................................................................................................................... 1 What Is Included ........................................................................................................................................................... 1 Claims ........................................................................................................................................
PAGE 4
Table of Contents Offset Mode ................................................................................................................................................................ 16 Pan............................................................................................................................................................................................. 16 Tilt .....................................................................................................................
PAGE 5
Before You Begin 1. BEFORE YOU BEGIN What Is Included Claims • Rogue™ R2 Spot • Neutrik® powerCON® power cord • 2 Omega brackets with mounting hardware • Warranty Card • Quick Reference Guide Carefully unpack the product immediately and check the box to make sure all the parts are in the package and are in good condition. If the box or the contents (the product and included accessories) appear damaged from shipping or show signs of mishandling, notify the carrier immediately, not CHAUVET®.
PAGE 6
Before You Begin Product At A Glance Use on Dimmer Outdoor Use Sound-Activated DMX Master/Slave Safety Notes x x x P x Auto Programs Auto-Ranging Power Supply Replaceable Fuse User-Serviceable x P P x Read all the following Safety Notes before working with this product. These notes include important information about the installation, usage, and maintenance of this product. This product contains no user-serviceable parts.
PAGE 7
Introduction 2. INTRODUCTION Description The Rogue™ R2 Spot is a compact, electronic, moving yoke product equipped with a 240-watt LED. It includes 2 color wheels, each with 7 colors plus white and 2 gobo wheels for gobo morphing. It also includes a rotating 3-facet prism, remote focus, frost and iris.
PAGE 8
Introduction Overview Fuse Power Switch DMX Data In Control Panel DMX Data Out Power Out Power In Rear View Front View Handle Top View -4- Side View Rogue™ R2 Spot User Manual Rev.
PAGE 9
Introduction Dimensions 16.10 in 409 mm 14.09 in 358 mm 10.28 in 261 mm 9.45 in 240 mm 12.87 in 327 mm 13.50 in 343 mm 12.13 in 308 mm 19.25 in 489 mm 4.53 in 115 mm Rogue™ R2 Spot User Manual Rev.
PAGE 10
Setup 3. SETUP AC Power Each Rogue™ R2 Spot has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each Rogue™ R2 Spot, refer to the label affixed to the product. You can also refer to the Technical Specifications chart in this manual. The listed current rating indicates the maximum current draw during normal operation. For more information, you may download Sizing Circuit Breakers from the CHAUVET® website: www.
PAGE 11
Setup Gobo Wheel The Rogue™ R2 Spot includes two gobo wheels: 7 rotating gobos plus open on wheel 1 and 8 fixed gobos plus open on wheel 2. The diagram shows the gobo number on the wheel, as numbered in the DMX Values tables. Open 28.8 mm 23.8 mm 1 Gobo Wheel 1 7 2 6 Metal Gobo Dimensions Gobo Wheel 1 3 5 27.8 mm 4 23.8 mm 8 1 7 2 Gobo Wheel 2 Glass Gobo Dimensions Gobo Wheel 1 3 6 5 4 The gobos on Gobo Wheel 2 are not removeable. Rogue™ R2 Spot User Manual Rev.
PAGE 12
Setup Color Wheel The Rogue™ R2 Spot includes 2 color wheels with 7 fixed colors plus open (white) in each wheel, as indicated below. The diagram shows the color name on the wheel, as shown in the DMX Values tables. 4 5 3 Color Wheel 1 6 2 7 1 Open (White) 4 3 5 Color Wheel 2 6 2 1 7 Open (White) -8- Rogue™ R2 Spot User Manual Rev.
PAGE 13
Setup Mounting Orientation Before mounting this product, read and follow the Safety Notes. For our CHAUVET® line of mounting clamps, go to http://trusst.com/productcategory/base-plates-accessories-clamps/. Always mount this product in a safe position and make sure there is adequate room for ventilation, configuration, and maintenance. Rigging CHAUVET® recommends using the following general guidelines when mounting this product.
PAGE 14
Operation 4. OPERATION Control Panel Description Button Function
Exits from the current menu or function Enables the currently displayed menu or sets the currently selected value in to the current function Navigates upward through the menu list or increases the numeric value when in a function Navigates downward through the menu list or decreases the numeric value when in a function Control Options You can set the Rogue™ R2 Spot starting address in the 001–512 DMX range.
PAGE 15
Operation Menu Map Main Level Programming Levels Address 001–512 Description Sets the DMX starting address 18CH 21CH DMX Auto Test Pan Pan Fine Tilt Tilt Fine Selects the DMX mode Runs the product’s test sequence P/T Speed Dimmer Dimmer Fine Shutter Color Color2 Run Mode Manual Test Gobo Gobo Rot Gobo2 Focus Prism R-Prism 000–255 Allows manual control of all settings from the control panel Iris Frost P/T Macro P/T Ma.Speed Special Function Rogue™ R2 Spot User Manual Rev.
PAGE 16
Operation Menu Map (Cont.) Main Level Programming Levels Pan Reverse Tilt Reverse Screen Reverse Pan Angle Tilt Angle BL.O.P/T Move BL.O.ColorMove Setup BL.O.
PAGE 17
Operation Address Set the DMX Address Run Mode DMX Personality This programming level sets the DMX starting address. • Starting from the Main Level screen, select Address, press . In this mode, each product will respond to a unique starting address from the DMX controller. All products with the same starting address will respond in unison. This option sets the products DMX address. • Change the starting address (001–512), press .
PAGE 18
Operation Setup Pan Reverse Tilt Reverse Screen Reverse Pan Angle Tilt Angle Pan and Tilt Movement BlackOut Color Movement BlackOut Gobo Movement BlackOut -14- This programming level controls the product’s head movement, lamp adjustments, and maintenance timer. • Starting from the Main Level screen, select Setup, press . Reverses the operation of the pan attribute. 1. Highlight Pan Reverse, press . 2. Select YES or NO, press . Reverses the operation of the tilt attribute. 1.
PAGE 19
Operation Reset Function This programming level allows the user to reset individual functions to the home position. • Starting from the Setup screen level, select Reset Function, press . Pan/Tilt Reset This option resets the Pan/Tilt functions to the home position. 1. Highlight Pan/Tilt, press . 2. Select YES or NO, press . Prism Reset This option resets the Prism functions to the home position. 1. Highlight Shutter/Prism, press . 2. Select YES or NO, press .
PAGE 20
Operation System Information Offset Mode Pan Tilt Gobo Gobo Rotate Gobo 2 Color 1 Color 2 Prism Focus Iris Frost Dimmer FO. Yellow Edge -16- This programming level shows standard information regarding the product’s operating status. • Starting from the Main Level screen, select Sys Info, press . • Ver: The current software version is displayed on the screen. • Running Mode: The current Running mode is displayed on the screen. • DMX Address: The current DMX address is displayed on the screen.
PAGE 21
Operation DMX Values 21CH Channel Function Value Percent/Setting 1 Pan 000ó255 0–100% 2 3 4 5 6 7 Fine Pan Tilt Fine Tilt Pan/Tilt Speed Dimmer Fine Dimmer 8 Shutter 9 Color Wheel 1 10 Color Wheel 2 000ó255 000ó255 000ó255 000ó255 000ó255 000ó255 000ó003 004ó007 008ó076 077ó145 146ó215 216ó255 000ó007 008ó015 016ó023 024ó031 032ó039 040ó047 048ó055 056ó063 064ó127 128ó191 192ó255 000ó007 008ó015 016ó023 024ó031 032ó039 040ó047 048ó055 056ó063 064ó127 128ó191 192ó255 Rogue™ R2 Spot User Manu
PAGE 22
Operation DMX Values (Cont.) 21CH Channel (Cont.
PAGE 23
Operation DMX Values (Cont.) 21CH Channel (Cont.) 19 Rogue™ R2 Spot User Manual Rev.
PAGE 24
Operation DMX Values (Cont.) 21CH Channel Function (Cont.
PAGE 25
Operation DMX Values (Cont.) 18CH Channel (Cont.) 8 9 10 11 Rogue™ R2 Spot User Manual Rev.
PAGE 26
Operation DMX Values (Cont.) 18CH Channel (Cont.
PAGE 27
Technical Information 5. TECHNICAL INFORMATION Product Maintenance To maintain optimum performance and minimize wear, you should clean this product frequently. Usage and environment are contributing factors in determining the cleaning frequency. As a rule, clean this product at least twice a month. Dust build-up reduces light output performance and can cause overheating. This can lead to reduced light source life and increased mechanical wear. To clean your product: 1. Unplug the product from power. 2.
PAGE 28
Technical Information 6. TECHNICAL SPECIFICATIONS Dimensions and Weight Power Light Source Photo Optic Gobo Dimensions Thermal DMX Ordering -24- Length Width Height Weight 16.1 in (409 mm) 13.5 in (343 mm) 19.25 in (489 mm) 46.6 lb (21.2 kg) Note: Dimensions in inches rounded to the nearest decimal digit.
PAGE 29
Technical Information Returns You must send the product prepaid, in the original box, and with the original packing and accessories. CHAUVET® will not issue call tags. Call CHAUVET® and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return. Clearly label the package with an RMA number. CHAUVET® will refuse any product returned without an RMA number.