Quick Reference Guide
QUICK REFERENCE GUIDE EN About This Guide The D-Fi Hub Quick Reference Guide (QRG) has basic product information such as mounting, menu options, and DMX values. Download the User Manual from www.chauvetdj.com for more details. Disclaimer The information and specifications contained in this QRG are subject to change without notice. LIMITED WARRANTY FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE. For Customers in the United States and Mexico: www.chauvetlighting.
QUICK REFERENCE GUIDE EN FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
QUICK REFERENCE GUIDE EN AC Power This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz. It runs on 9 VDC, 500 mA. To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it. Mounting Before mounting this product, read the Safety Notes. Mounting Diagram Mounting clamp Threaded mounting hole size M12 (e.g.
QUICK REFERENCE GUIDE EN Configuration The D-Fi™ Hub can be used two ways: • It can be connected to any DMX controller and transmit to D-Fi™-compatible lights. • It can be connected to any DMX lights and receive from a D-Fi™-compatible controller. To transmit To connect the D-Fi™ Hub to a DMX controller and configure it to transmit to D-Fi™-compatible lights, do the following: 1. Connect the hub to the controller using a DMX cable. 2. Connect the hub to power. 3.
GUIA DE REFERENCIA RÁPIDA ES Acerca de esta guía La Guía de referencia rápida (GRR) del D-Fi Hub contiene información básica sobre el producto, como montaje, opciones de menú y valores DMX. Descargue el manual de usuario de www.chauvetdj.com para una información más detallada. Exención de responsabilidad La información y especificaciones contenidas en esta GRR están sujetas a cambio sin previo aviso.
GUIA DE REFERENCIA RÁPIDA ES Declaración de la FCC Este equipo se ha probado y se ha determinado que cumple los límites correspondientes a un dispositivo digital de Clase B, de conformidad con la parte 15 de las normas de la FCC. Estos límites están diseñados para proporcionar una protección razonable frente a las interferencias perjudiciales en una instalación de carácter doméstico.
GUIA DE REFERENCIA RÁPIDA ES Corriente alterna Este producto tiene una fuente de alimentación con detección automática que puede funcionar con un rango de tensión de entrada de 100–240 VCA, 50/60 Hz. Funciona a 9 VCC, 500 mA. Para evitar un desgaste innecesario y alargar su vida útil, desconecte completamente el producto mediante el interruptor o desenchufándolo durante periodos en que no se use. Montaje Antes de montar este producto, lea las Notas de seguridad.
GUIA DE REFERENCIA RÁPIDA ES Configuración El D-Fi Hub se puede usar de dos formas: • Se puede conectar a cualquier controlador DMX y transmitir a luces compatibles con D-Fi. • Se puede conectar a cualquier luz DMX y recibir de un controlador compatible con D-Fi. Transmitir Para conectar el D-Fi Hub a un controlador DMX y configurarlo para transmitir a luces compatibles con D-Fi, haga lo siguiente: 1. Conecte el concentrador al controlador usando un cable DMX. 2.
MANUEL DE RÉFÉRENCE FR A propos de ce manuel Le Manuel de Référence (MdR) du D-Fi Hub reprend des informations de base sur cet appareil notamment en matière de montage, d'options de menu et de valeurs DMX. Veuillez télécharger le manuel d'utilisation à partir du site internet www.chauvetdj.com pour plus de détails. Clause de non Responsabilité Les informations et caractéristiques contenues dans ce MdR sont sujettes à modification sans préavis.
MANUEL DE RÉFÉRENCE FR Conformité FCC Cet appareil a été testé conforme aux limites d'un appareil numérique de classe B tel que prévu à la section 15 du règlement de la FCC. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle.
MANUEL DE RÉFÉRENCE FR Description Le D-Fi Hub est un émetteur-récepteur capable aussi bien de recevoir les signaux D-Fi Hub que de fonctionner par raccordement câblé DMX. Il peut aussi recevoir les données par câble DMX et transmettre des signaux D-Fi. Il synchronise, simultanément et de manière sans fil, un nombre illimité de récepteurs et d'unités compatibles D-Fi. Il est petit, compact et doté d'antenne robuste. Grâce à cette unité, vous pouvez sélectionner les canaux manuellement ou automatiquement.
MANUEL DE RÉFÉRENCE FR Montage Avant de monter cet appareil, veuillez lire les Consignes de Sécurité.
MANUEL DE RÉFÉRENCE FR Configuration Vous pouvez utiliser le D-Fi Hub de deux façons différentes : • en le connectant à un jeu d'orgues DMX pour transmission vers des unités d'éclairage compatibles D-Fi. • en le connectant à des unités d'éclairage DMX et en assurant une réception avec un jeu d'orgues compatible D-Fi. Transmettre Pour connecter le D-Fi Hub à un jeu d'orgues DMX et le configurer afin qu'il émette un signal vers des unités d'éclairage compatibles D-Fi, faites comme suit : 1.
SCHNELLANLEITUNG DE Über diese Schnellanleitung In der Schnellanleitung des D-Fi Hub finden Sie die wesentlichen Produktinformationen, wie etwa über die Montage, Menüoptionen und DMX-Werte des Geräts. Laden Sie für weiterführende Informationen unter www.chauvetdj.com das Benutzerhandbuch herunter. Haftungsausschluss Die in dieser Anleitung aufgeführten Informationen und Spezifikationen können ohne vorherige Ankündigung geändert werden.
SCHNELLANLEITUNG DE FCC-Konformität Diese Ausrüstung wurde getestet und unterliegt den gemäß Teil 15 der FCC-Vorschriften für digitale Geräte der Klasse B festgelegten Beschränkungen. Diese Grenzwerte sind so definiert, dass sie ausreichenden Schutz gegen schädigende Störungen in einer Wohnumgebung gewährleisten. Dieses Gerät erzeugt, nutzt und emittiert Hochfrequenzstrahlung und kann sich bei einer nicht den Anweisungen entsprechenden Installation und Verwendung negativ auf den Funkverkehr auswirken.
SCHNELLANLEITUNG DE Wechselstrom Dieses Gerät verfügt über ein Vorschaltgerät, das automatisch die anliegende Spannung erkennt, sobald der Netzstecker in die Schukosteckdose gesteckt wird, und kann mit einer Eingangsspannung von 100~240 V AC, 50/60 Hz arbeiten. Stromversorgung sind 9 VDC, 500 mA.
SCHNELLANLEITUNG DE Konfiguration Der D-Fi Hub kann auf zwei Arten verwendet werden: • Er kann mit einem beliebigen DMX-Controller verbunden werden und sendet an mit D-Fi™ kompatiblen Leuchten. • Er kann mit einer beliebigen DMX-Leuchte verbunden werden und empfängt von mit D-Fi™ kompatiblen Controllern Übertragen Um den D-Fi Hub mit einem DMX-Controller zu verknüpfen und ihn zum Senden von Signalen an mit D-Fi kompatiblen Leuchten zu konfigurieren, gehen Sie wie folgt vor: 1.
GUIDA RAPIDA IT Informazioni sulla Guida La Guida Rapida D-Fi Hub contiene informazioni di base sul prodotto quali montaggio, opzioni menù e valori DMX. Per maggiori dettagli, scaricare il Manuale Utente dal sito www.chauvetdj.com. Esclusione di responsabilità Le informazioni e le specifiche contenute in questa guida possono essere modificate senza preavviso. GARANZIA LIMITATA PER LA REGISTRAZIONE DELLA GARANZIA ED I TERMINI E CONDIZIONI COMPLETI VISITARE IL NOSTRO SITO WEB.
GUIDA RAPIDA IT Conformità FCC Questa apparecchiatura è stata collaudata ed è risultata conforme ai limiti previsti per i dispositivi digitali in Classe B, come da Parte 15 delle Norme FCC. Tali limiti sono stati definiti per fornire ragionevole protezione contro interferenze nocive in installazioni residenziali.
GUIDA RAPIDA IT Alimentazione CA Questa unità è dotata di alimentatore a commutazione automatica con tensione in ingresso di 100–240 V CA, 50/60 Hz. Funziona a 9 VCC, 500 mA. Per evitarne l'eccessiva usura e migliorarne la durata nel tempo, scollegare l'unità dalla presa elettrica o disattivare l'alimentazione tramite l'apposito interruttore, se inutilizzata per lunghi periodi. Montaggio Prima di montare l'unità, leggere le Note di Sicurezza.
GUIDA RAPIDA IT Configurazione È possibile utilizzare D-Fi™ Hub in due modi: • collegato a qualsiasi controller DMX per trasmettere a luci compatibili D-Fi™; • collegato a qualsiasi controller DMX per ricevere da controller compatibile D-Fi™. Transmettere Per collegare D-Fi Hub ad un controller DMX e configurarlo per trasmettere a luci compatibili D-Fi, effettuare le operazioni descritte di seguito. 1. Collegare il concentratore al controller utilizzando un cavo DMX. 2.
BEKNOPTE HANDLEIDING NL Over deze handleiding De D-Fi Hub Beknopte Handleiding (BH) bevat basisinformatie over het product, zoals montage, menu-opties en DMXwaarden. Download de gebruikershandleiding op www.chauvetdj.com voor meer informatie. Disclaimer De informatie en specificaties in deze BH kunnen zonder voorafgaande kennisgeving worden gewijzigd. BEPERKTE GARANTIE GA NAAR ONZE WEBSITE VOOR REGISTRATIE VAN DE GARANTIE EN DE VOLLEDIGE ALGEMENE VOORWAARDEN.
BEKNOPTE HANDLEIDING NL FCC-naleving Deze apparatuur is getest en voldoet aan de limieten voor een digitaal apparaat van klasse B, volgens Onderdeel 15 van de FCC-regels. Deze limieten zijn ontworpen om een redelijke bescherming tegen schadelijke interferentie in een wooninstallatie te verschaffen.
BEKNOPTE HANDLEIDING NL Beschrijving De D-Fi Hub is een zender en ontvanger die D-Fi signalen ontvangt en verzendt via een DMX-kabel of gegevens ontvangt via een DMX-kabel en D-Fi-signalen verzendt. Het synchroniseert draadloos een onbeperkt aantal D-Fi-ready armaturen en ontvangers tegelijkertijd. Het is klein en compact met een stevige antenne. Een ingebouwde optie is handmatige of automatische kanaalselectie.
BEKNOPTE HANDLEIDING NL Montage Lees alvorens dit product te monteren alle Veiligheidsinstructies.
BEKNOPTE HANDLEIDING NL Configuratie De D-Fi Hub kan op twee manieren gebruikt worden: • Het kan aangesloten worden op een DMX-regelaar en verzenden naar D-Fi-compatibele lampen. • Het kan aangesloten worden op alle DMX-lampen en ontvangen van een D-Fi-compatibele regelaar. Verzenden Om de D-Fi Hub aan te sluiten op een DMX-regelaar en het te configureren om te verzenden naar D-Fi-compatibele lampen doet u het volgende: 1. Sluit de hub aan op de regelaar met een DMX-kabel. 2.
QUICK REFERENCE GUIDE Multi-Language Contact Us General Information Technical Support Chauvet World Headquarters Address: 5200 NW 108th Ave. Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll Free: (800) 762-1084 Voice: (844) 393-7575 Fax: (954) 756-8015 Email: chauvetcs@chauvetlighting.com Website: www.chauvetdj.com Chauvet Europe Ltd.