Cut Sheet

800-834-4969 in U.S. & Canada • www.chatsworth.com

THREADED CEILING KIT

Product Cut Sheet

Used to suspend Cable Runway from the ceiling. Material is steel,

inished with Gold over zinc plating.

Kit consists of:

- (1) ceiling support bracket

- (1) either 3/8-16 x 6’, 5/8-11 x 6’, M10 x 2M or

16 x 2M threaded rod

- (1) runway support bracket

- (4) either 3/8-16, 5/8-11, M10 or M16 hex nuts

Note: Recommended spacing between ceiling kits is 5’ (1.5 m).

The ceiling hole diameter for P/N 11310 is .375” (9.5 mm) for 3/8”

or M10 rod; .500” (12.7 mm) for 5/8” or M16 rod.

Drawing shows 2 kits

SlimFrame, MegaFrame and TeraFrame are federally registered trademarks of Chatsworth Products, Inc.

Cube-iT Plus, Evolution, OnTrac, QuadraRack and Simply Efficient are trademarks of Chatsworth Products, Inc.

All other trademarks belong to their respective companies. 04/10

Part

Number

Description

Shipping

Weight

lb (kg)

11310-001 Threaded Ceiling Kit, 3/8” Rod 3 (1.4)

11310-003 Threaded Ceiling Kit, 5/8” Rod 7 (3.2)

11310-093 Threaded Ceiling Kit, M10 x 2M 7 (3.2)

11310-094 Threaded Ceiling Kit, M16 x 2M 7 (3.2)

PAGE 1
Product Cut Sheet THREADED CEILING KIT Used to suspend Cable Runway from the ceiling. Material is steel, finished with Gold over zinc plating. Kit consists of: - (1) ceiling support bracket - (1) either 3/8-16 x 6’, 5/8-11 x 6’, M10 x 2M or M16 x 2M threaded rod - (1) runway support bracket - (4) either 3/8-16, 5/8-11, M10 or M16 hex nuts Note: Recommended spacing between ceiling kits is 5’ (1.5 m). The ceiling hole diameter for P/N 11310 is .375” (9.5 mm) for 3/8” or M10 rod; .500” (12.