User's Manual

ManualsBrandsCHASING ManualsElectronicsCHASING RC3

User ManualV1.0

DISCLAIMER

Thank you for purchasing the CHASING M2 Pro underwater drone. Please read this entire document carefully

before using the drone. By using this product, you hereby signify that you have read this disclaimer and all

instructions carefully and that you understand and agree to abide by the terms and conditions herein.

Chasing accepts no liability for damage, injury, or any legal responsibility incurred directly or indirectly from the use of the

CHASING M2 Pro in the following conditions:

01. Damage(s) or injuries incurred when users are drunk, taking drugs, drug anesthesia, dizziness, fatigue, nausea and any other

conditions no matter physically or mentally that could impair your ability.

02. Damage(s) or injuries caused by subjective intentional operations.

03. Any mental overcompensation caused by accident.

04. Failure to follow the guidance of the manual to assemble or operate.

05. Malfunctions caused by reﬁt or replacement with non-Chasing accessories and parts, or unauthorized modiﬁcation, disassembly,

or shell opening not in accordance with ocial instructions.

06. Damage(s) or injuries caused by using third-party products or fake Chasing products.

07. Damage(s) or injuries caused by misoperation or subjective misjudgment.

08. Damage(s) or injuries caused by mechanical failures due to erosion, aging.

09. Damage(s) or injuries caused by operating the unit with a low battery alert.

10. Damage(s) or injuries caused by operating the drone out of maximum safe range and depth.

11. Damage(s) or injuries caused by knowingly operating the product in abnormal conditions (such as the assembly is not completed,

or the main components have obvious faults, obvious defect or missing accessories).

12. Damage(s) or injuries caused by operating the drone in a sensitive zone such as a military area or private waters without ocial

permission.

13. Damage or injury caused by using in bad water conditions (such as high winds, or turbid zone).

14. Damage or injury caused by uncontrollable external factors, including severe collision, tidal wave. swallowed by animal.

15. Damage(s) or injuries caused by infringement such as any data, photo or video material recorded by the use of the CHASING M2

Pro.

16. Other losses that are not covered by the scope of Chasing's liability.

17.

When used in charging mode, the maximum operating temperature is 25°C, and the maximum operating temperature of the

product in normal use is 45°C.

Summary of content (18 pages)

PAGE 1
User Manual V1.0 DISCLAIMER Thank you for purchasing the CHASING M2 Pro underwater drone. Please read this entire document carefully before using the drone. By using this product, you hereby signify that you have read this disclaimer and all instructions carefully and that you understand and agree to abide by the terms and conditions herein.
PAGE 2
Warning: Bright light Possible skin or eye damage，Disconnect power before servicing – Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types); – Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; – Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; – A bat
PAGE 3
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 4
CHASING M2 Pro INSTRUCTION ROV CHASING M2 Pro is a professional underwater ROV designed for professional users and industrial applications. M2 Pro has 8 Vectored Thrusters layout which allows OMNI movement in all directions. Compared to the CHASING M2, the M2 Pro motor has been upgraded by 50%. The Maximum speed is 4 Knots, depth is 150 meters (490 FT) and the maximum horizontal radius is 400 meters (1300FT). M2 pro support AC and battery hybrid power supply to achieve unlimited battery life.
PAGE 5
12. Battery fastener 13. Battery twistlock knob Remote controller (CM2R3) The Chasing M2 Pro remote controller had integrated communication and control. It connects directly to the drone via the included tether and connects wirelessly to your mobile phone/tablet via Wi-Fi.And your mobile phone/tablet also can be directly connected to the remote control through the data cable. It allows the drone to display a live video feed on your phone/tablet, which enables users to control the drone in real-time.
PAGE 6
14. Type-c interface: Direct connection with mobile phone/tablet device 15. HDMI Socket：1080P HD image real-time output 16. Tether Connection Socket/Charging socket. 17. Phone/Tablet Clamp：Used to attach phone/tablet mount to mounting bracket. 18. Clamp Button：Pull apart the two ends and put in the phone/tablet, then press this button to tighten. Note: Do not put the controller in the water to avoid damaging the device, damages caused by water ingress are not covered by the warranty.
PAGE 7
Installation & Connection 1. Download CHASING GO1 App CHASING GO1 App ：Scan the following QR code or visit the IOS APP Store/Google Play/Chasing website for downloading. (For IOS 9.0 or later/Android version 4.4 or later） 2. Connect ROV with Remote Controller a. Insert one end of the tether connector into the remote controller connector socket. b. Reserve a suitable length and hang the Buckle on the Buckle Bracket, and make it tension. c. Insert the other end of the tether connector to the ROV. d.
PAGE 8
Mobile phone/Tablet directly connected Connect the complimentary cable to the remote control and the phone/tablet respectively. Wi-Fi Connection a. On the Phone/Tablet, go to Wi-Fi settings. b. Wait for 5-10 seconds and the Chasing_xxxx network will appear as an option. c. Click to connect and enter the Wi-Fi password: 12345678 5. App interface Introduction Open the APP and enter the camera, you will see the real-time scene transmission.
PAGE 9
1） Connect the ROV with remote controller by the tether, Switch remote controller power button to on 2） Find the Chasing_xxxxxxxx Wi-Fi on the phone/tablet/laptop Wi-Fi list. 3） Input Wi-Fi Password ：12345678 Download to Phone/Tablet 1）Open CHASING GO1 App, click the Media button in the lower right corner. 2）Find the video/photo that you want to download. Click the download button and the image will be saved directly to the phone/tablet's photo album (Download folder).
PAGE 10
Warning： 1）Before removing or installing the Micro SD card, please switch remote controller power button to off, and wipe off the water on the ROV； 2） Check the O-ring on the tether connector, please be sure the O-ring cannot be squeezed out when tightening the cover. If it is missed or damaged, please replace it in time. Disassemble and Install the Battery compartment i.
PAGE 11
PAGE 12
Navigation M2 Pro has 8 Vectored Thrusters layout which allows OMNI movement (up, down, left and right, back and forth, pitch, roll, and pan) in all directions. The default is basic control mode, suitable for beginners. Navigation attitude and remote control are as follows: I.
PAGE 13
Up/down Turnleft/right ii.
PAGE 14
Roll:Turnthedialtoadjusttherollattitude,releasetofixstatus If necessary, users can switch modes by long pressing the "One-key reset " button of the remote controller. When switching to the advanced mode, the ROV can achieve all-round full-freedom movement. The advanced mode is based on the first-person perspective. Note: in the basic mode, the maximum Angle of pitch and roll is about 80 degrees Charging Guidance ROV & Remote Controller Adapter（25.2V 2.
PAGE 15
Red light indicates Charging, green light indicates fully charged. Specifications ROV Size 480*267*165mm Weight ≈5.7KG Battery 300.68Wh Maximum Depth 490ft Maximum Speed 2.0 m/s (4 Knots)） Battery Life Battery Cycle Up to 4H >300times Operating Temperature 14℉~113℉ Camera CMOS Aperture Focal Length ISO Range Field of View Maximum Image Resolution Image File Types Normal video Slow motion video 1/2.3 F1.
PAGE 16
Stream Video Type SD Card Memory MP4 Standard 128G (maximum support 512G) Remote Controller Size Weight Battery capacity Battery life Wireless HDMI 6.3*6.1*4.9 inch 685g 2500mAh ≥ 6H (Depend on working condition) Wi-Fi 1080P Tether & Winder 656ft Version(200M) 2.5KG Adapter Adapter ROV Charging time Remote controller charging time 2.9A/25.2V 4.
PAGE 17
Maintenance and Precautions 1. Navigation Safety Open sea navigation No dense radio or radar signals Relatively clear water quality, no dense seaweed Do not dive more than 330 ft. 2.Battery Protection Do not run out of battery power When not in use, keep battery power at 50% - 70% Charge when power is less than 25% Working temperature -10 °C ~ 60 °C ( -18°F-140°F) 3. Charging Protection ·Only use the Chasing standard adapter. ·Red light means charging. ·Green light means fully charged. 4.
PAGE 18
c After using the ROV in the salt water, please put it in fresh water for about 1 hour and turn it on, let the drone run for10 minutes to discharge the salt, and try out the water after cleaning with a towel. 5.Connector Sockets /Tether Connectors ·Check the Connector socket and tether pre-dive, keep dry and clean. Salt and moisture may cause corrosion of the connector. Be sure to wash the socket with fresh water if the interface has water stains, and make the connectors dry after cleaning. 6.